Hey all, I am offering any and all OEM Ford parts at 10% over dealer cost. I work for a large Ford wholesale parts department and I convinced my boss to advertise on this forum.
I only handle OEM parts and we are not a Ford racing / Motorsports dealer. However we can handle any of your OEM mechanical and body part needs.
A few examples-
your cost -----sugg.list
2001 Cobra front rotor- XR3Z-1125-BC $122.89------$186.20
2001 Cobra front pads- F5ZZ-2001-A $ 132.04-----$200.07
2001 Cobra Mtrcrft pads-2U2Z-2V001-PA $73.36------$111.15
2001 Cobra Right taillight-XR3Z-13404-CA $182.27---$276.17
____________________________________ Got a big truck with big guts? CoalRollers.com
2004 Honda Odyssey EXL-RES (V-TEC BABY!)
2001 CVPI
1985 Yamaha XJ 700 Maxim
1979 Honda Hawk 12k
More previous vehicles than most have owned in a lifetime
Hey all, I am offering any and all OEM Ford parts at 10% over dealer cost. I work for a large Ford wholesale parts department and I convinced my boss to advertise on this forum.
I only handle OEM parts and we are not a Ford racing / Motorsports dealer. However we can handle any of your OEM mechanical and body part needs.
A few examples-
your cost -----sugg.list
2001 Cobra front rotor- XR3Z-1125-BC $122.89------$186.20
2001 Cobra front pads- F5ZZ-2001-A $ 132.04-----$200.07
2001 Cobra Mtrcrft pads-2U2Z-2V001-PA $73.36------$111.15
2001 Cobra Right taillight-XR3Z-13404-CA $182.27---$276.17
How about '03-'04 16" 5 spoke aluminum wheels that come on the Ranger FX4 ? I'm getting tired of having my center caps stolen off of my '01 Ranger's aluminum wheels.
____________________________________
Blue '98 Cobra Coupe S/C #009 of total'98 run. Built 8/29/97(1 of 10w/black cloth) . ..***Updated 8-8-01- 3.1 pulley,3.1 FMU,42FMS injectors,255 intank, recal M/Air,K. Bell Boost A-Pump,Smog Pump eliminated, BBK LT's ,"Flows",offroad"H",3.73's/Auburn/Moser axles,Carbon Fiber D.S.,HPM "Mega Bite Jr.'s",etc.,etc.
Dynotuned 4/24/07 by Alternative Auto with new SCT Tune. 436 HP, 390TQ @10.6psi /6300rpm
May2003@ Norwalk "Smackdown" 12.4@120 (2.04 60ft) on Dunlop Street tires 3290lbs.
Hey I hope you can help me out man... I need two seals for my SHO's oil cooler. The one seal is obselete and the other has been discontinued. I called Apple Valley Ford and Stillwater Ford over the weekend and the locating system was down for the weekend. But they seem to think they can still get the parts because a apparently a few dealers still have them in back stock. Anyway here are the part numbers and descriptions:
E9DZ-6748-A, oil cooler bolt to block seal
E9DZ-6L621-A, oil cooler to block seal
I think retail on these are $28.49 and $13.09
Let me know if you can help me out on these. THANKS!
I'm trying to get my PM's working but if they still don't work for you just shoot me an email at irocu26@hotmail.com or just post a reply.
Hey I hope you can help me out man... I need two seals for my SHO's oil cooler. The one seal is obselete and the other has been discontinued. I called Apple Valley Ford and Stillwater Ford over the weekend and the locating system was down for the weekend. But they seem to think they can still get the parts because a apparently a few dealers still have them in back stock. Anyway here are the part numbers and descriptions:
E9DZ-6748-A, oil cooler bolt to block seal
E9DZ-6L621-A, oil cooler to block seal
I think retail on these are $28.49 and $13.09
Let me know if you can help me out on these. THANKS!
I'm trying to get my PM's working but if they still don't work for you just shoot me an email at irocu26@hotmail.com or just post a reply.
-Mike
Shame,shame,shame.....You called Apple valley and Stillwater
But seriously, They are both discontinued but I can get them out of a place in Wisconsin that handles obsolete Ford parts.
Your cost $9.36 and $14.10, They generally come overnight and there is no additional freight charge from them.
If you want these please call me at 1-800-328-9552 and ask for Steve.
Hey SVTParts guy, how ya doin? Sounds like a winner to me/us! Can you get a 4:10 ring and pinion and install kit for a 2000 L ? It's a 9.75" ........... Thanks, Jack
Hey SVTParts guy, how ya doin? Sounds like a winner to me/us! Can you get a 4:10 ring and pinion and install kit for a 2000 L ? It's a 9.75" ........... Thanks, Jack
Sorry, I don't do FRPP parts at this time. I can get standard gear sets but that isn't what you are looking for.
Please keep me in mind for anything else you may need.
Can you send me a listing of available parts for an '02 SVTF. I am interested in some suspension mods and I know Ford use to have a 4 pt. front strut tower brace..
Is the savings similar " % -wise" as the Motorcraft parts ??
SInce this will be one of the most asked (IMO) for parts for the '96-'98, what will the price be for the blue or red Motorsport racing wires for the 4 valve motors??
Is the savings similar " % -wise" as the Motorcraft parts ??
SInce this will be one of the most asked (IMO) for parts for the '96-'98, what will the price be for the blue or red Motorsport racing wires for the 4 valve motors??
Thanks,
Todd
Hey Todd, The 4v wire in blue or red would be $88.00.
The savings % will not be similar to Motorcraft, because my discount is based on cost you will see the biggest savings on the parts that have the largest markup built in to their suggested list price.
Motorcraft parts have the largest margin built in therefore you see the biggest discount on those parts.
Ford accessories and Ford Racing have less markup built in so the discount will look smaller but it is still better than paying retail and I will try to match or beat anyone on any Ford, Motorcraft or FRPP part if I am not lower already.
Last edited by FORDSVTPARTS; 06-17-2005 at 11:31 AM.
I just bought a 93 Lightning and I beleive it is missing some interior parts. The Center Console is their but their is no cup holders and their is nothing under the lid so if you could help me out here thatd be great
Linear Mode
