Mass air options?

Birddog1220 · 08-18-2009, 01:32 AM

Hello everyone, Have a 93 Lightning with mild head porting and 260/260 cam, E4OD......Cant really afford the ford racing mass air kit, wondering what is out there as an alternative for under $500 if anything...

any help would be greatly appreciated, Thanks in advance!

JD129 · 09-07-2009, 02:05 PM

Any thing you put together or buy in a kit is going to be more than $500. Been there done that. Have you looked into a tweeter system?

94wlightning · 10-12-2009, 08:27 AM

Find a 95 bronco or f150 in a junkyard and buy the whole wiring harness and comp. I Had 220 bucks shipped to my door for mine off of EBAY.

BlueOvalForever · 10-15-2009, 04:18 PM

Give more info on cam.

Why do you think you need M/A?

Also check out NLOC.net there is alot of info on M/A there and a guy that can comverter you harness over if needed.

ezernut9mm · 10-18-2009, 04:31 AM

speed density will handle in excess of 400 hp from all that i have read.

marc2000gt · 10-25-2009, 07:26 PM

Speed Density will handle a lot of stuff, including extra cubes. You just have to know how to tune it. The main thing is to be careful on the cam selection. SD has to have a good vacuum signal. My last cam had .600 lift, but low duration, and a 114 lobe seperation. My vacuum out of gear at idle was 17".

crug75hid · 11-01-2009, 11:14 AM

you will get alternatives from some sources but they will cost you much in long run. its better to get a new kit! probably a better deal as an investment