I needed to hit the dyno to tune for my newest pulley combo, sadly for me my intercooler pump is dead and my numbers are down like crazy, but I can say with a 190-200* intake temp im still putting down 404/479...which still sucks. So a new pump will be put in and ill redyno at a later date.
My graph
and not one bit of detonation during any of those pulls.
also we had to jiggle the IC Pumps plug and or unplug and plug it back in. the 372 horse pull was when we noticed that something wasnt right and immediately went to work. so suffice to say im not happy with my IC pump going out...but the numbers even with stupid high IAT2's means once I get her fixed things should get better
My buddy needed to tune for his new meth injection kit on his TT 1 series.
His is rather mild compared to a friend I work with...but either way damned nice car!
All the pics are at the shop I always use, the same guy that had the 700+ AW horse power Evo...more on that car later.
loaded up and strapped down
the results, not bad for pump gas and his daily driven tune
now while we were there I got to check out one of the new motors he will be using in his hatch. Once done it should put down roughly 900 horses.
And as for the evo...well after blowing up the transfer case
He has now painted the entire car (from what ive seen) and is running a new engine combo....Also a dodge stealth rear end is in the car and he is now running smaller brakes all around so he can mount his 15x9 (if i remember right) wheels and slicks
His nitrous Mustang has been converted back to N/A and is turning mid 9's all motor on a 347 (or was it a 351? i forget), no boost and no giggle gas.
On the Evo ALL body panels are now carbon fiber except the ABC pillars and the rear fenders/quarter panels. The doors, roof, hood, front/rear bumpers, trunk etc etc are all CF.
The car currently pumps out 1180 horses at 52 pounds of boost, he is still dialing in the suspension and so on and currently is running 8.4 at 172mph
I will get pics of more vehicles as I can
____________________________________
6# Motoblue lower, TR-6's, Accufab Single blade TB, C&L elbow, APS sheetmetal Plenum, Magnum Powers Blower, Chickenears Cool-Aid, Custom Dynomax catback, DMP VB, Custom SCT X3 tune by Rick at ATS
Interested in Oakleys on the cheap PM me
Linear Mode
