View Single Post
Old 11-13-2008, 09:24 AM   #11 (permalink)
IUP99snake
The Shocker
 
IUP99snake's Avatar
 
Join Date: December 2002
Location: Downtown Orlando, Florida
Posts: 1,612
0.63 per day
Trader Rating: (1)
I have a 3.9" pulley. Its the same size that came with the procharger kit, and was designed to make 10LBS with a stock 99 cobra. That it did.

With an aviator longblock, O/R X pipe, Cat back, and 4" Morpheus powerpipe, the same pulley makes about 7-8LBS of boost. The morpheus pipe probably gave it an extra 2-3LBS of boost, but it lost more than that because the 03-up heads/cams flow much better, but also give the motor a 500RPM lower redline.

I briefly put on a 3.1" pulley and was rewarded with an extra 5LBS of boost at 3000RPM, but it wouldn't go any higher than 12LBS of boost after 4500RPM (probably because I had a crappy belt).

That 3.1" pulley is for sale, by the way. Anyone want it?

Homer
____________________________________

Lincoln Aviator Longblock | P1-SC Procharger | Front-Mount Intercooler | BBK Twin 65MM Throttle Body | gReddy Blowoff Valve | 42LB Injectors | Lightning 90MM Blow-Thru MAF | Morpheus 4" Powerpipe | Morpheus Blower-Brace | "mystery" O/R X Pipe | Mac Cat-Back | Y2K 00R Rims | Tremec 6-Speed | Pro-5.0 T-56 Shifter with 5-speed knob | Aluminum Driveshaft | Fidanza 11" aluminum flywheel | SPEC III clutch | Kauffmann Motorsports Tune | Auto-Meter Triple A-Pillar Boost/AF/Fuel gauges |
IUP99snake is offline   Reply With Quote