[CobraOnTheLoose]

Originally Posted by abandan

I just got back from the track, and was wondering if my track time was slow. Also post up your track times and mods! I have a 03 Convert Cobra with: bored .020 over stock block, Diamond pistons, ARP studs, full bassani exhaust, Accufab throttle body, CAI, Methanol injection, 2.8 upper pulley, 4# lower pulley, Spec 3+ clutch and steel flywheel, B&M ripper shifter, Poly IRS bushings, 3.73 gears and some other braces. I ran a 12.29 @ 113 in the 1/4 with a 1.77 60ft time Saturday night. I was on Mickey Thompson ET streets, with very little (if any) tire spin off the line. I was launching at about 4200rpm's.

So how does this compare to what you guys are gunning? I look forward to seeing your replys!!!

I havent seen a time slip from my friend, but he ran high 11's in the 1/4 with a stock eaton w/ 2.8 pulley and stock lower on Nitto's. So it sounds like your times are a bit high....granted you have extra weight of a vert vs. coupe.