|
hmm, well as far as i can remember there was only two wiring things that needed to be done:
1. sensor with the two vac lines coming from the egr tube had to be extended. nothing to it, cut and add a section of line to each wire(3 total) since the mounting location of that sensor moves further away.
2. the intercooler pump like i mentioned before.
____________________________________
Previous....
2001 Cobra: built motor, hellion 76mm, 17psi, 645rwhp
2003 Cobra: port/pulley/intake/exhaust, 13psi, 516rwhp
1999 Cobra: stage 4 eaton, stock pulley(8psi), 470rwhp
|