'95 R Fuel Cell

[RJY]

Hey guys, it finally happened. Fuel odor in the garage; thought it was the lawn mower. No such luck.

Need to know if anyone has any connections/knowledge of shop(s) in Nashville, TN that can replace the bladder. Thanks!

[StillIntense]

You can drain it, clean it and send it back to Fuel Safe for replacement. Other than that, recommend that you call Fuel Safe and find out where the nearest authorized Fuel Safe dealer is to your location. They can do the work....
If it makes you feel any better, I went through this in the spring. I just bought a new cell complete to save the hassle....kept the old shell after tearing out the bad bladder. Now I have a clean spare to ship off to get a new bladder if it happens again.

[598]

Do a search for the contacts on this board for the bladder replacement. Dropping the tank is easy. Rip out the bladder and foam, send the box off to fuelsafe, and reinstall. For some reason when I did my reinstall, I had to get a spacer to slightly raise the pump off the floor of the bladder.

Steve

[RJY]

Thanks for the advise guys!

[Robert M]

Originally Posted by RJY

Thanks for the advise guys!

Mark Wilson (on this forum) is who to contact about your dreaded drip.

Here is a link to the thread when I started to drip, my fuel cell that is..........

http://www.svtperformance.com/forums...tick-tick.html

Top of the second page is where the pictures begin.

R

[598]

I used Mark Wilson. Just was not sure of board rules and didn't want to ruffle feathers. No problems with him.

Steve

[RJY]

Thanks for the suggestions guys!

[95PGTTech]

Do the 95R and 00R fuel cells use fuel pump assemblies and sending units specific to those vehicles, or are they the stock 95 Cobra and 2000 Cobra units mounted inside the fuel cell?

[93SVTCobra]

The 00R has a unique pump. The 95R can use any stock replacement drop in tank pump.