where you guys located at in tulsa...i bought my cobra with a seq. tail light setup (dunno what brand) but i think somethings screwd up because they dont flash the way they should
We do not offer repairs or do installs. Solely online sales, aside from local car shows. Although I dont mind giving some advice on your problem, just PM me.
It seems like your factory Turn/Hazard flasher is worn and we recommend this to many people with older stangs. The addition of added bulb elements (added amp draw) can wig out older more worn electronic turn flashers and cause a ramping up of the sequence.
I would recommend installing a new turn signal flasher from a local parts store. The flash rate will remain the same because you are buying a direct replacement. This will allow your sequence to be full from the start. This problem only seems to plague 1998 and older cars.
It seems like your factory Turn/Hazard flasher is worn and we recommend this to many people with older stangs. The addition of added bulb elements (added amp draw) can wig out older more worn electronic turn flashers and cause a ramping up of the sequence.
I would recommend installing a new turn signal flasher from a local parts store. The flash rate will remain the same because you are buying a direct replacement. This will allow your sequence to be full from the start. This problem only seems to plague 1998 and older cars.
good to know, i thought they were a little fast, but wasnt too worried, im digging em alot already...ill replace it asap and get another vid up.
I find myself turning on my signal way before i normally would just to show em off..lol
thanks for offering a quality affordable kit thats easy to install.
today i installed some load resisters and loaded the sequential tails with LED's... i think it Looks sick.
also i bent the prongs on a 3157 bulb backwards and installed them in the reverse lights. Gives each side like another 12 watts or so running both filaments.
autotrix sequentials = $50
GP Thunder 20 LED wide angle bulbs = $14 a Pair ,cheapest i could find em
Load resisters = 10 bucks