10-30-2006, 05:41 PM
#1 (permalink )
Authorized Vendor
Join Date: April 2006
Location: Rancho Cucamonga
Posts: 461
0.35 per day
Getting through to KB
--------------------------------------------------------------------------------
We understand it is frustrating when trying to phone in and we realize this is the number one complaint, but the truth is we ARE busy. Our lines never stop ringing.
We still have several methods of contacting us, which we have mentioned before, but it bears mentioning again:
Sales: (909) 941-6646
Tech (909) 941-0985
Fax: (909) 944-4883
website:
www.kennebell.net
email:
kennebell@kennebell.net
email:
jamess@kennebell.net
you can also PM me here
Thank you,
James
01-02-2007, 05:04 PM
#2 (permalink )
Just a guy
Join Date: December 2006
Location: Southgate, MI
Posts: 43
0.04 per day
Hi James,
I don't know if you ever come in contact with the folks that do the product info, but I was reading some PDF's on your site and noticed this:
http://www.kennebell.net/techinfo/fo...obra03dyno.pdf
It says 9's at 135mpg. If that is right, I'll take two of these blowers.
Mods can delete this after he responds. I cannot PM anyone, I don't know why.
01-02-2007, 07:17 PM
#3 (permalink )
Authorized Vendor
Join Date: April 2006
Location: Rancho Cucamonga
Posts: 461
0.35 per day
Thanks for the letting me know of the typo.
Thanks,
James
03-26-2007, 11:08 PM
#4 (permalink )
03 Cobra Poster
Join Date: January 2007
Location: Southeast
Posts: 760
0.74 per day
Hi, Any approved dealers of your product in Georgia ?
03-27-2007, 02:04 PM
#5 (permalink )
Authorized Vendor
Join Date: April 2006
Location: Rancho Cucamonga
Posts: 461
0.35 per day
I would really recommend Modular Powerhouse in Marietta.
Modular Powerhouse
4921 Canton Rd. Suite 300
Marietta, Ga. 30066
(770)591-0000
Thank you
04-09-2007, 12:44 PM
#6 (permalink )
Rookie SVT Poster
Join Date: March 2007
Location: kcmo
Posts: 72
0.07 per day
any approved dealers in Kansas City area?
____________________________________
01 Lightning - k&n fipk, predator tune....4# lower coming soon
SOLD 99 Trans Am- slp cai, hooker LT's, ory, e-cutout, slp dual/dual, b&m shift kit, 3.73's
08-01-2007, 01:47 AM
#7 (permalink )
New SVT Poster
Join Date: July 2007
Location: Allen Park
Posts: 6
0.01 per day
Any approved dealers in Michigan detroit area?
08-31-2007, 09:37 AM
#8 (permalink )
Insane SVT Poster
Join Date: November 2006
Location: Royaloak MI
Posts: 1,411
1.27 per day
Any approved dealers in Michigan detroit area?
+1
____________________________________
Vehicle: 97 cobra
11-28-2007, 01:39 AM
#9 (permalink )
Banned
Join Date: November 2007
Location: South NJ
Posts: 73
0.10 per day
how about NJ?
02-23-2008, 03:05 PM
#10 (permalink )
Rookie SVT Poster
Join Date: February 2004
Location: MARRERO
Posts: 140
0.07 per day
how about in new orleans
02-24-2008, 12:56 PM
#11 (permalink )
Powered by BOOST
Join Date: May 2007
Location: San Francisco/New Orleans
Posts: 972
1.06 per day
how about san francisco
Vehicle: 03 Cobra Vert
HP: 700
TQ: 700
02-28-2008, 10:46 AM
#12 (permalink )
Authorized Vendor
Join Date: December 2003
Location: Southern California
Posts: 556
0.26 per day
Quote:
Originally Posted by
oscareltemblo
Any approved dealers in Michigan detroit area?
Quote:
Originally Posted by
PACIFICGREENSVT
Any approved dealers in Michigan detroit area?
+1
Lidio at Alternative auto (586)463-0010
Paul's High Performance (517)764-7661
Livernois (313)561-5500
02-28-2008, 10:47 AM
#13 (permalink )
Authorized Vendor
Join Date: December 2003
Location: Southern California
Posts: 556
0.26 per day
Quote:
Originally Posted by
bigcap33
how about NJ?
Waldwick Auto (201)447-4635
02-28-2008, 10:51 AM
#14 (permalink )
Authorized Vendor
Join Date: December 2003
Location: Southern California
Posts: 556
0.26 per day
Quote:
Originally Posted by
NOMANIAC3
how about in new orleans
The closest dealer to New Orleans is going to be Running with the Devil. They are in Mobil, Alabama. (251)432-8180
02-28-2008, 10:52 AM
#15 (permalink )
Authorized Vendor
Join Date: December 2003
Location: Southern California
Posts: 556
0.26 per day
Quote:
Originally Posted by
Jockcobra
how about san francisco
The closest dealer to you is in San Jose, Speed Merchant (408)295-0930
02-28-2008, 10:22 PM
#16 (permalink )
Rookie SVT Poster
Join Date: October 2007
Location: Dallas Texas
Posts: 144
0.19 per day
How about Lexington, KY?
____________________________________
Dense Charger
Magna Flow cat-back
18" American Chrome Rebels
BFG KDW NT rear 295
BFG KDW NT front 245
Tokico D-spec struts/shocks
Steeda springs
Steeda IRS stop the hop kit
UPR C/C plates
Steeda Bump Steer Kit
MM full lenght sub frame connectors
Spec 2+ clutch, Steeda billet steel FW
Steeda Quadrant, fw adj, cable
02-29-2008, 10:24 AM
#17 (permalink )
Authorized Vendor
Join Date: December 2003
Location: Southern California
Posts: 556
0.26 per day
Quote:
Originally Posted by
CDADEUCE06
How about Lexington, KY?
We have The Mustang store, Louisville (502)964-2165 and Modular Depot, southgate, (859)746-1666
03-13-2008, 01:40 AM
#18 (permalink )
I like injecting people
Join Date: May 2003
Location: Southwestern Riverside County
Posts: 1,594
0.67 per day
Quote:
Originally Posted by
James@KB
--------------------------------------------------------------------------------
We understand it is frustrating when trying to phone in and we realize this is the number one complaint, but the truth is we ARE busy. Our lines never stop ringing.
We still have several methods of contacting us, which we have mentioned before, but it bears mentioning again:
Sales: (909) 941-6646
Tech (909) 941-0985
Fax: (909) 944-4883
website:
www.kennebell.net
email:
kennebell@kennebell.net
email:
jamess@kennebell.net
you can also PM me here
Thank you,
James
Is your pm function shut-off?
____________________________________
Redfire Coupe-
SOLD
Borla Catback - K&N CAI
DSG Convertible -
DEAD
H+R SS Springs - Hans Racecraft SFCs - Borla Catback - Bassani mids and catted-X
K&N FIPK2 - SCT 2400 - Gords HE - Billetflow idlers and IRS brace
Accufab KB polished TB which is connected to some polished thingy which makes a loud whine (what's autorotor mean?)...Heheheh
590HP 529TQ Tuned by Greg at racersedgetuning.com
2007 ZO6 - K&N CAI, ported intake manifold, 160 t-stat and tune by Ryne at Cunningham Motorsports: 510/474 SAE
Speed doesn't kill - I'm the proof
03-13-2008, 10:22 AM
#19 (permalink )
Authorized Vendor
Join Date: December 2003
Location: Southern California
Posts: 556
0.26 per day
James no longer works for Kenne Bell. You can PM me with your questions.
Thanks!
Mike
07-10-2008, 01:14 AM
#20 (permalink )
Crazy SVT Poster
Join Date: June 2008
Location: st louis
Posts: 322
0.60 per day
its way better
Last edited by DOWN2EARTH411; 07-24-2008 at 02:06 AM .
Vehicle: 2004 cobra
07-10-2008, 10:42 AM
#21 (permalink )
Authorized Vendor
Join Date: December 2003
Location: Southern California
Posts: 556
0.26 per day
What happened?
07-10-2008, 11:46 AM
#22 (permalink )
I kill Brick Walls
Join Date: April 2008
Location: I don't know, NY
Posts: 251
0.43 per day
I've called a few times and never had a problem. /shrug
____________________________________
Kenne Bell 2.6H, Crower Stage II cams, JLT RAI, SCT 3000 MAF, 60# Injectors, KB BAP,
Bassani o/r X, Bassani CB, FRPP 4.10's, Spec Stage 3+ clutch, Spec Aluminum Flywheel, Steeda FLSFC,
Steeda IRS Bracket, Steeda IRS bushings, Steeda Diff Brace, B&M Pro ripper, M/T ET Streets
Vehicle: 2003 KENNE BELL COBRA
HP: 638
TQ: 611
07-10-2008, 11:55 AM
#23 (permalink )
Authorized Vendor
Join Date: December 2003
Location: Southern California
Posts: 556
0.26 per day
Thanks we try, but we are not perfect!
07-10-2008, 02:01 PM
#24 (permalink )
Powered by BOOST
Join Date: May 2007
Location: San Francisco/New Orleans
Posts: 972
1.06 per day
I get though all the time now that James is not there
07-10-2008, 02:11 PM
#25 (permalink )
Authorized Vendor
Join Date: December 2003
Location: Southern California
Posts: 556
0.26 per day
Yeah a lot of things have got better since James is gone!
Thread Tools
Display Modes
Linear Mode
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off