Anyone from Omaha Metro Area - Page 151

LeathalSVT · 10-11-2008, 03:31 PM

What the hell happened to getting together this weekend? No one even mentioned Friday night at any point so I made other plans, get home see that Paul text me @ 7p.m. and called @ 10:30. By then I was a little drunk and wasn't going back out.

I'm so glad I blew off going to K.C. this weekend to hang with the "Warlords" this weekend, whatever.

ravenknight · 10-11-2008, 06:03 PM

Friday is the weekend, I texted you and then called you but no response. A few others were game so we meet up no big deal. I posted that I couldnt do Sat since its my bday Sorry dont get mad I am sure if you really want to meet up I am game for Sunday but thats the last one for me for sure.

MachME · 10-11-2008, 06:43 PM

So is anyone down for next weekend? Any day will work, friday saturday or sunday.

I dont want to wait till the last minute to see whats up.

Id be up for going to MAM possibly too.

camaro_chic17 · 10-11-2008, 08:31 PM

Friday night was fun

I'm down for more cruising.. not putting my car away yet lol

02SaleenSCMutt · 10-11-2008, 10:44 PM

TONS of fun Friday night! I can't keep up with you guys! I got tired and was getting low on fuel, had to dip out and get home at the CB exit. I think next time if we are going to be out till 3am, I'm going to have to remember to leave the tonneau cover at home, I was freezing!

goody03 · 10-12-2008, 01:19 AM

i had so much fun, thanks guys

02SaleenSCMutt · 10-12-2008, 08:06 AM

Quote:

Originally Posted by goody03

i had so much fun, thanks guys

lol, someone said you didn't want to be too cold!! HA, typical Corvette guy...

96badvenm · 10-12-2008, 09:27 AM

yeah that was a blast, most fun ive had in a while!

I never knew my car would keep up with a porter, and pullied cobra

Just messing Paul!

8616v · 10-12-2008, 12:40 PM

hell i was surprised i was that close to a pretty much stock cobra.

had a good time, the mach isn't getting put away for a while yet...so i'd be up for next weekend...I haven't been out to MAM in like 2years...I really want to see what my time is now.

ravenknight · 10-12-2008, 01:49 PM

Alex I know my car pulled you harder with just filter and catback. I need to go back to stock lol. I know what I need to do now just gotta wait til after the holidays.
Have fun next weekend I will be in the Bayou next weekend.

MachME · 10-12-2008, 04:08 PM

Quote:

Originally Posted by 8616v

hell i was surprised i was that close to a pretty much stock cobra.

had a good time, the mach isn't getting put away for a while yet...so i'd be up for next weekend...I haven't been out to MAM in like 2years...I really want to see what my time is now.

I keep saying im ganna go and still never have, so i just need to do it.

Where would you want to meet and what time? I would want to get there early...

You stayed next to alex? Dig, roll what? more details.

Cant wait to pull the cover off this weekend and drive, hopefully on thanksgiving break too.

8616v · 10-12-2008, 05:31 PM

it was a couple 20 ish rolls, we stayed pretty even till i hit 3rd then he started walking...by the end of 3rd i'd say his rear bumper was about 1/2 to 1 car lenght out.

ravenknight · 10-13-2008, 07:26 AM

well got the slp and eaton sold, so put the stock catback on, damn I have a quiet cobra, its kinda cool, all you hear now is whine

goody03 · 10-13-2008, 08:55 AM

does it sound good

you should make a sound clip

M240Bravo · 10-13-2008, 09:16 AM

Neil or Paul, would help me change out my valve covers and pulleys and a few other things. I have a clue how to do this stuff but a little help would be nice.

goody03 · 10-13-2008, 10:19 AM

sam are you doing this to day? i could help

96badvenm · 10-13-2008, 10:30 AM

Quote:

Originally Posted by ravenknight

Alex I know my car pulled you harder with just filter and catback. I need to go back to stock lol. I know what I need to do now just gotta wait til after the holidays.
Have fun next weekend I will be in the Bayou next weekend.

that was also before any exhaust on mine... i know your car has to be much faster than what it was running the other night

What did you get for the slps?

M240Bravo · 10-13-2008, 11:01 AM

Quote:

Originally Posted by goody03

sam are you doing this to day? i could help

HAHAHA No. I have about 6Gs more to spend before that. It won't be until spring. If you want to help or just hang out I'll take a set of hands.

Things I'll need a little help on.
whipple
valve covers
Raditor
H/E
intercooler tank and raditor tank
temp stat.
fuel injectors
pulleys
TB and MAF

Then I'm going to have some one else(a shop)
K-member A-arms
LT headers and mid pipe
EGR delete
Brakes
coil-overs front and rear
IRS bushings
Wiring(hiding all the wring under the hood, and wiring my new fuel system)
ALL the tranny and clutch work
head cooling mod
CC plates
And a Lot of paint work and clear bra.

Also Neil or Paul do you know if a 3.4L whipple needs a hood clearing mod to fit under the hood?

8616v · 10-13-2008, 12:54 PM

I could help if i'm in town this spring...

you know alot of that stuff isn't nearly as hard as people make it sound...the k comes out in 30min and once thats out headers aren't so bad and a shop will charge you like $1500 to do those two.

M240Bravo · 10-13-2008, 01:01 PM

Quote:

Originally Posted by 8616v

I could help if i'm in town this spring...

you know alot of that stuff isn't nearly as hard as people make it sound...the k comes out in 30min and once thats out headers aren't so bad and a shop will charge you like $1500 to do those two.

Mikey, if you want to help thats cool, but if you show up I'm not buying beer. We'll get nothing done with you drinking. hahahaha

02SaleenSCMutt · 10-13-2008, 05:53 PM

Quote:

Originally Posted by 8616v

hell i was surprised i was that close to a pretty much stock cobra.

had a good time, the mach isn't getting put away for a while yet...so i'd be up for next weekend...I haven't been out to MAM in like 2years...I really want to see what my time is now.

Couple good rollers...

I was in the neighborhood until I shifted into 4th. I didn't know you was that fast. Next time we should do that again with my top up and my heater off. lol

ravenknight · 10-13-2008, 10:08 PM

Quote:

Originally Posted by M240Bravo

Neil or Paul, would help me change out my valve covers and pulleys and a few other things. I have a clue how to do this stuff but a little help would be nice.

Definitly I would help with all of it especially since I am pretty good on the IRS

Heres the exhaust vid

YouTube - offroad hpipe stock catback

ravenknight · 10-13-2008, 10:14 PM

Quote:

Originally Posted by M240Bravo

HAHAHA No. I have about 6Gs more to spend before that. It won't be until spring. If you want to help or just hang out I'll take a set of hands.

Things I'll need a little help on.
whipple** Easy
valve covers**easy
Raditor
H/E**easy
intercooler tank and raditor tank**easy
temp stat.**easy
fuel injectors **easy
pulleys**easy
TB and MAF**easy

Then I'm going to have some one else(a shop)
K-member A-arms
LT headers and mid pipe
EGR delete
Brakes**easy
coil-overs front and rear**easy
IRS bushings**easy
Wiring(hiding all the wring under the hood, and wiring my new fuel system)**why **** that
ALL the tranny and clutch work** ask Ben then easy**
head cooling mod**easy
CC plates**easy
And a Lot of paint work and clear bra.**body shop

Also Neil or Paul do you know if a 3.4L whipple needs a hood clearing mod to fit under the hood?NOPE

Hope this helps, I like BudLight Lime or rolling rock

ravenknight · 10-13-2008, 10:21 PM

Quote:

Originally Posted by 96badvenm

that was also before any exhaust on mine... I know your car has to be much faster than what it was running the other night

what did you get for the slps?

300.00.

M240Bravo · 10-14-2008, 07:04 AM

Quote:

Originally Posted by ravenknight

Hope this helps, I like BudLight Lime or rolling rock

I'll buy all the beer and food if you and Mike, Bill will help. Also any of the stock stuff I'm taking off I'll sell to any of you guys really cheap.