Look at this, Ford is going to be applying the Ecoboost to V-8's maybe?
"Originally Posted by IUP99snake
I actually just found an interesting article about some of Ford's plans for extending this technology to the V8 counterparts. Codenamed "Bobcat", the engine consists of a DOHC 5.0 V8 utilizing turbocharging and direct injection with separate gasoline and ethanol injectors for each cylinder. The engine can run on either gasoline or ethanol entirely, but achieves maximum efficiency running primarily on gasoline while also injecting ethanol in the cylinders to reduce detonation based on operating conditions.
Neat!
Homer
Preliminary tests are showing it making 500hp and 750tq."
____________________________________
Black 2000 GT- Exhaust/Geared/Tune, 252/285 (on 87octane)
-Permanently in storage
BadMC (badmustangsclub.com)
Born Ford blue, bleed Ford blue and will die Ford blue
Had a ring go out in one of the cylinders, so i had rusty eck put in a new long block. So im so happy to have it back. Anyone going to the show tomorrow?
Glad to hear you got it runnin. I don't know about you guys, but I'm about ready for another Saturday night meet and cruise. Maybe next weekend? Week from Saturday works for me
____________________________________
4.30s, 555Rs, short throw, BBK springs, X pipe, K&N, 03 Wheels, Mac Cans.
8.72 @ 80 mph
Also I beat a Mach1 in my bone stock lightning lastnight. OHH that car was slow!
**** you sam...you know i got out of it after i missed third and punched my vent into the dash...
aren't you going to tell us about your best et of the night?...it was really good.
next sat works for me...
anyone going down to the show tonight?
oh...wohoo...700 posts...
____________________________________
'86 Scirocco 16v (R.I.P.)
20AE GTI Black Magic Pearl (Sold )
'03 Mach 1 Azure Blue w/IRS...what can i say solid axles suck...
Born: 03/26/2003 Bought: 09/07/2005
Had a ring go out in one of the cylinders, so i had rusty eck put in a new long block. So im so happy to have it back. Anyone going to the show tomorrow?
What did you get, the aluminator? I hope it worked out for you at the dealer, wouldnt be suprised if there are some new dents and scratches.
Anyways, how much do you want for the stock long block thats messed up?
**** you sam...you know i got out of it after i missed third and punched my vent into the dash...
aren't you going to tell us about your best et of the night?...it was really good.
next sat works for me...
anyone going down to the show tonight?
I would go but no one called me.
Oh and are you talking about that 6.0 at 114 I ran. I was going to keep it on the down low, but what ever.
Quote:
Originally Posted by 1KleenSVT
Had a ring go out in one of the cylinders, so i had rusty eck put in a new long block. So im so happy to have it back. Anyone going to the show tomorrow?
I was going to go then i got side tracked and i still need to clean up the mach from friday and i think it kinda wraps up at 8 or 9....
my bad sam...i didn't know you were trying to keep that kinda speed under wraps...
im suprised you went back, was it any better then last year when we went? What did you run?
Are you ever ganna gear the mach?
O and forget about next saturday, how bout this saturday, instead of celebrating with fire works we can raise hell on the streets, the cops will understand.
i ran about the same times...the track was about the same.
I think i may some day...probably 4.10's...
Quote:
Originally Posted by 1KleenSVT
Im planning on going out friday night sometime
456
i kleen, post up if you do, did you see my post, what are you doing with the messed up motor? did you take the heads off to see if there is any damage?
So is anyone going to come to Lincoln with Sam when he brings the cobra down here? I don't mean ride with him, but bringing there cars as well???
____________________________________
Originally Posted by LuDamiKE81 View Post
**Warning due to POSI's extreme blower work the rest of your drive train may fail!**
MODS: POSI "race"ported eaton, POSI port matched TB/PL, BF 2.8 upper, LFP 6# lower, BBK high boost intake, SCT 2800 big air MAF, X-Cal3, NGK TR6 Coppers, Meziere Kooks 1 7/8's LT's, 3" straight mid pipes, electric water pump, 3" 1 race bullet mufflers, 3" dumps, 6 point chromeoly cage, 98GT SRA,Moser C-clip elim,Moser 33 spline gun drilled axles, Moser 3.73's, Moser 33 spline full spool, Welded axle tubes, QA1 real coil over kit,12 way QA1 rear shocks, UPR fully adjustable LCA's, Baseline UCA's, full length SFC's, Welded battle boxes, UPR anti-roll bar, QA1 Tubular K member, QA1 Tubular A-arms, UPR coil over kits front, Lakewood 90-10's, Rear battery relocation, Weld draglites 15x3.5 front, Weld draglite 15x10 rear, MT sportsman 27" runners, Hoosier 28x10x15 ET drags... 150 wet NX kit to come.
WEIGHT REDUCTION: Front bumper delete, front sway bar delete, ABS delete,Brembo 13" race vented rotors, 98GT front calipers,98GT rear brakes, Heatercore delete, A/C delete, Cobra seat delete, Passenger airbag delete, Stereo delete (all of it including wiring), carpet delete, rear seat delete, sound deadener delete, truck trim panel delete, interior trim panel delete, center consul delete, rear sway bar deleteSpare tire/jack delete, ... Lexan windows are next remove power windows shortly after...
)
Linear Mode
