09-04-2009, 09:14 PM
#1 (permalink )
Rippin' Through Gears
Join Date: January 2009
Location: Los Angeles,California
Posts: 1,036
2.35 per day
Got Her All Cleaned Up! (PICS)
____________________________________
1999 Mustang SVT Cobra
#1605
Teskid Block .20 over, Balance Rotating Assembly,Proble Forged Pistons,Eagle Race Rods, SHM Stage 1 Cams,Forged Cobra Crank, SHM Race Rings & Bearings, ARP Main/Head/Rods Studs, 08 Shelby High Volume Oil Pump, BBK L/T, VRS O/R X-pipe with catalyc conv, SLP Loud Mouth 1's, Pro 5.0Shifter, JLT CAI, Cut Terminator Springs 3/4 up front-1/2 out back, PowerSlot Rotors F&R, Nitto DR 315's, Oil Separator Mod, SCT XCal 2, CanTuned by Don@Lasota Racing, 7 quarts of oil, more to come....
1990 Mustang GT ( The Race Junkie)
1967 Mustang Coupe (Project Car)
(Gone But Not Forgotten)
1994 Mustang GT (Modified)
Last edited by 99cobra09; 09-04-2009 at 09:17 PM .
09-04-2009, 09:50 PM
#2 (permalink )
Crazy SVT Poster
Join Date: September 2006
Location: Oak Ridge
Posts: 673
0.52 per day
Your paint looks great!
Your wheels are terrible on a NE.
09-04-2009, 09:53 PM
#3 (permalink )
KB 2.2 @ 21psi = :-)
Join Date: January 2008
Location: Tulsa/Norman, Ok
Posts: 6,402
8.22 per day
Looks great!
____________________________________
Kenne Bell 2.2L l Spec 3+ l 26 Spline l 335s l Built Solid Axle l AutoMeter l JLT l Bassani l Eibach l MGW l Metco l FRPP l Magnaflow l LFP.
Vehicle: 2003 Cobra
HP: 617
TQ: 577
09-04-2009, 09:53 PM
#4 (permalink )
SVT God
Join Date: January 2008
Location: San Jose, CA
Posts: 2,039
2.55 per day
Love the cobra, stance, wingless, pipes, but not the wheels. IMO
____________________________________
1999 COBRA #1945 of 4040 Performance Mods SRA 3.27's - Ported 01 Cobra lower - 3/8 Spacer - SLP CB w/ Bassani Race Mufflers (Round) - Mangnaflow Catted X-Pipe - JLT RAI - Diablo Tuner - MM FLSFC - MM LCA’s - Steeda UCA’s - Trick Flow Diff cover -OE 10th Anniv. 17X9/10 w/ 315 MT DR's - Eibach Pro-Kit - KYB Adj. Shocks - Pro 5.0 Shifter w/ MGW handle & Steeda Insulated knob Appearance 03 Cobra Side Scoops - Black Crystal Headlights - 01 Cobra bumper - 10th Anniv. Steering wheel - 10th Anniv. CF Interior Parts - Jensen 7" DVD/CD Player - White Saleen Door inserts - 03/04 Pedals
Vehicle: 1999 SVT Cobra
1/4 Mile: 13.79@ 100.64
09-04-2009, 09:58 PM
#5 (permalink )
Rippin' Through Gears
Join Date: January 2009
Location: Los Angeles,California
Posts: 1,036
2.35 per day
Yea the wheels are not verry catchy, i have them laying around so i figured i would try them!
09-04-2009, 10:21 PM
#6 (permalink )
NO MERCY
Join Date: November 2004
Location: SoCal
Posts: 1,734
0.89 per day
Looks Clean Jose
Cant wait to see it in person soon.
09-05-2009, 04:06 PM
#7 (permalink )
Rippin' Through Gears
Join Date: January 2009
Location: Los Angeles,California
Posts: 1,036
2.35 per day
This is temporary; new paint job is coming soon!!!
09-05-2009, 04:08 PM
#8 (permalink )
speeding
Join Date: January 2008
Location: Morgantown, WV, Callaway, Md (hometown)
Posts: 1,266
1.61 per day
Looks good!
____________________________________
2001 silver cobra vert. H&R sport springs. jlt cai. Borla stinger catback. 95 style cobra r hood. FR500's. More mods in future.
1989 black gt..Ton of goods
1986 gt.. SOLD!!
Proud Member of the Mid-Atlantic CobraAssociation
Vehicle: 01 silver vert
HP: 281
TQ: 300
1/4 Mile: 13.62@ 103.00
09-06-2009, 10:47 PM
#9 (permalink )
atomic number 30
Join Date: August 2005
Location: NC
Posts: 1,392
0.83 per day
btw its '67 and '90 not 67' and 90'
'67 = 1967
67' = 67 feet
pet peeve of mine... sorry
Last edited by kxt; 09-06-2009 at 10:48 PM .
09-09-2009, 11:32 PM
#10 (permalink )
Black on Black on Black
Join Date: November 2006
Location: Eaton, IN
Posts: 157
0.13 per day
Sharp car...had one like her but had to let 'er go.
____________________________________
SOLD:
1999 Black SVT Cobra
BBK Longtube Headers
BBK X Pipe
Flowmaster Super 40's
COBRAless for now...
09-10-2009, 12:26 AM
#11 (permalink )
Rippin' Through Gears
Join Date: January 2009
Location: Los Angeles,California
Posts: 1,036
2.35 per day
Quote:
Originally Posted by
SVT1012
Sharp car...had one like her but had to let 'er go.
Sry to hear that; should really look into getting another one
09-10-2009, 12:31 AM
#12 (permalink )
The Joe is rockin'
Join Date: October 2001
Location: HOCKEYTOWN ® MI
Posts: 1,395
0.45 per day
What's up with the '67? More details please...
____________________________________
'01 Cobra Coupe #918 of 3867
-Delivered 6.09.01, w/ spoiler delete
-Steeda Tri Ax
-FL Densecharger CAI
-O/R Magnaflow X pipe & catback
-Maximum Motorsports FL Subframe Connectors
-276rwhp/284rwtq Dyno'ed 8.10.02 (before exh)
-312rwhp/307rwtq Dyno'ed 8.09.03 (after exh)
-Autometer Ultra Lite full sweep elec oil pressure & water temp gauges
-Fluidyne rad
Updated oil pressure switch p/n
'94 Cobra Coupe #1404 of 5009
-Steeda Tri Ax
-JLT CAI
-3.55 rear gear
-O/R Magnaflow X-pipe & Magnapack catback
09-10-2009, 12:49 AM
#13 (permalink )
Cristina Scabbia FTW!
Join Date: June 2007
Location: Turlock, Ca
Posts: 1,773
1.75 per day
My car next! She needs a good detail.
____________________________________
"when shopping for a used sports car, check the radio presets. If they are all Rock, then the transmission is shot."
________________________
Quote:
Originally Posted by
NewKid
Yeah, I actually hate sleep, but i'm at my parents for Christmas so I can just spend all night drinking and wanking it like I might back at my place.
Vehicle: 2002 Mustang GT
HP: 217
TQ: 259
09-10-2009, 01:39 AM
#14 (permalink )
Yeah...im slow
Join Date: December 2007
Location: costa mesa, ca
Posts: 186
0.23 per day
yes those other stangs need some love. The cobra looks great!
____________________________________
mods:
09-10-2009, 02:25 PM
#15 (permalink )
Rippin' Through Gears
Join Date: January 2009
Location: Los Angeles,California
Posts: 1,036
2.35 per day
Quote:
Originally Posted by
COBRA90GT
What's up with the '67? More details please...
It has a built motor; carbed 10.1 c.r 306,aluminum heads, c4 trans with stall and shift kit, crower cam and all supporting mods yada..yada.. I really need to get going on it but man this take lots of money to get them real nice. My dad is a professional painter so paint is done just need to get started on it.
Quote:
Originally Posted by
murked99cobra
yes those other stangs need some love. The cobra looks great!
Haha... yea i have to give them some love too, but when you have 3 cars to maintain and got school expenses and all the other stuff you have no spare money for them!
Quote:
Originally Posted by
fastboss
My car next! She needs a good detail.
hahah... for sure!
09-13-2009, 12:09 AM
#16 (permalink )
Hoping Lighning Strikes!
Join Date: February 2008
Location: Columbia,KY
Posts: 45
0.06 per day
good looking
____________________________________
Horsepower is easy, Traction is the real problem
09-13-2009, 08:43 PM
#17 (permalink )
Make my day
Join Date: September 2005
Location: Summerside, PEI
Posts: 13,904
8.40 per day
Nice stang collection
____________________________________
Quote:
Originally Posted by
Rick James
+1, haha. I think the first time I saw this video I fell off my dinosaur and broke my wooden underwear. Cool vid tho.....
Vehicle: 1997 SVT Cobra
HP: 452
TQ: 374
09-14-2009, 09:31 AM
#18 (permalink )
Are you my baby's momma?
Join Date: October 2007
Location: ATL and the TPA
Posts: 1,259
1.42 per day
Berry berry nice.
____________________________________
Vehicle: 01 Cobra Vert
HP: 287
TQ: 298
09-14-2009, 10:32 AM
#19 (permalink )
The Joe is rockin'
Join Date: October 2001
Location: HOCKEYTOWN ® MI
Posts: 1,395
0.45 per day
Quote:
Originally Posted by
99cobra09
...It has a built motor; carbed 10.1 c.r 306,aluminum heads, c4 trans with stall and shift kit, crower cam and all supporting mods yada..yada.. I really need to get going on it but man this take lots of money to get them real nice. My dad is a professional painter so paint is done just need to get started on it.
...
Nice.
Thread Tools
Display Modes
Linear Mode
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off