11-01-2009, 11:29 PM
#1 (permalink )
Rookie SVT Poster
Join Date: October 2009
Location: downey
Posts: 41
1.63 per day
taking off 1999 cobra engine
does anybody know of any links where it shows how to take off the engine?
or does anybody know how to take off the engine because my engine got blown
11-01-2009, 11:33 PM
#2 (permalink )
SVT God
Join Date: October 2005
Location: San Diego
Posts: 2,763
1.83 per day
Get yourself a manual and a good friend that knows what he's doing. If you don't have either, take it to a shop. I'm going to guess you don't have a lot of experience.
Vehicle: 2001 Cobra
11-01-2009, 11:36 PM
#3 (permalink )
Rookie SVT Poster
Join Date: October 2009
Location: downey
Posts: 41
1.63 per day
Quote:
Originally Posted by
slo984now
Get yourself a manual and a good friend that knows what he's doing. If you don't have either, take it to a shop. I'm going to guess you don't have a lot of experience.
im low on money and the shop i usually go to is charging me 300 bucks to take it off.
and i barely have enough for the rebuild
11-02-2009, 12:19 AM
#4 (permalink )
Crazy SVT Poster
Join Date: July 2008
Location: Temperance MI
Posts: 318
0.64 per day
The engine. Take it off.
lulz
____________________________________
Vehicle: 1996 SVT Cobra
11-02-2009, 12:21 AM
#5 (permalink )
Rookie SVT Poster
Join Date: October 2009
Location: downey
Posts: 41
1.63 per day
Quote:
Originally Posted by
MR.ADAMS
The engine. Take it off.
lulz
yea duh lol
but idk how
11-02-2009, 12:28 AM
#6 (permalink )
QuenchMyThirstw/Gasoline
Join Date: November 2007
Location: Concord, NC
Posts: 3,180
4.31 per day
If you use the search button, I'm sure you'll find plenty of write ups as this has been discussed more than once.. I would recommend searching for 'engine removal' rather than 'taking engine off' as it will probably provide better results
____________________________________
Quote:
Originally Posted by
James Snover
With that set up you can teach them the following tricks:
Die.
Die Right Now.
Die Right Freaking Now and Burn, You Eight-Legged Freak From Hell!
Sit.
Jim Snover
Vehicle: 2001 Cobra Vert
HP: 324
TQ: 324
1/4 Mile: 13.20@ 107.00
11-02-2009, 12:30 AM
#7 (permalink )
Rookie SVT Poster
Join Date: October 2009
Location: downey
Posts: 41
1.63 per day
Quote:
Originally Posted by
Un4GivN
If you use the search button, I'm sure you'll find plenty of write ups as this has been discussed more than once.. I would recommend searching for 'engine removal' rather than 'taking engine off' as it will probably provide better results
thanks bro
11-02-2009, 12:41 AM
#8 (permalink )
Thud Thud Thud Thud Thud
Join Date: March 2007
Location: Berwyn, PA
Posts: 5,035
5.11 per day
Unbolt it.
just search it. As someone said, its been covered
Last edited by 01SVTSnake; 11-02-2009 at 12:43 AM .
Vehicle: 2001 Cobra
11-02-2009, 12:55 AM
#9 (permalink )
Insane SVT Poster
Join Date: September 2008
Location: Lincoln, Nebraska
Posts: 1,213
2.74 per day
lol
____________________________________
2953
2004 Cobra-REDFIRE
-2001 Mustang cobra-SOLD
-1983 Mustang GT-SOLD
Vehicle: 2004 Cobra
11-02-2009, 02:12 AM
#10 (permalink )
Speedconcepts
Join Date: September 2002
Location: Los Angeles
Posts: 2,444
0.93 per day
..but what if he wants to put the engine back on?
____________________________________
Mods
*BRAND NEW 2000 4.6L DOHC COBRA MOTOR w/ T45* 294.18 rwhp and 295.96 rwtq
*MAC catback*H&R Springs*Front Bilsteins, w/ Tokico rear illuminas*8.8 w/ 3.55's*MM CC plates*Subframes*Cobra F&R Brakes*
My Cobra motor swap pics: Cobra swap # 1 | Another Cobra swap: Cobra swap # 2 | GT swap pics: GT swap # 1
11-02-2009, 07:25 AM
#11 (permalink )
Angel's Daddy
Join Date: January 2009
Location: Maryland
Posts: 224
0.72 per day
any idea on how to take my tires out guys?
____________________________________
2001 Cobra : 4.10 gears, BBK O/R Xpipe and Flowmaster catback
11-02-2009, 09:31 AM
#12 (permalink )
Think with your Dipstick
Join Date: November 2008
Location: Blairsville, Pa
Posts: 500
1.31 per day
Quote:
Originally Posted by
mustang1990
does anybody know of any links where it shows how to take off the engine?
or does anybody know how to take off the engine because my engine got blown
Well, Im gonna start by saying wow. Here are your steps to taking OFF the engine:
1. get inside vehicle
2. drive to parking garage
3. find a wall, any wall
4. gun it as hard as you can and drive right into the wall.
____________________________________
MODMAX 5.0 FORGED STROKER ROTATING ASSEMBLY:Teksid block 3.750 Forged Stroker 8 bolt crankshaft 9.19:1 compression ratio, 17cc Dished Pistons 3.552 Standard Bore. ACE 4340 Forged H-Beam Rods with ARP 4740 bolts Total Seal Stainless steel rings,ARP Head studs,ARP Main Cap studs Internally Balanced crankshaft, honing done by Fox's Racing Engines, Indiana Pa
Spec 2+ Clutch, Spec Aluminum flywheel, FRPP Aluminum Driveshaft,BBK CAI,Ported short runner intake,Nazty Performance Stage 3 - ported 03/04 cobra heads,Nazty Performance Stage 2 N/A Cams 232/230 .475/.475 Custom LSA,BBK Long tube Headers,BBK Catted X-Pipe,SLP Loudmouth 1's Catt back,Diablo Predator Tuner,Steeda Tri-ax shorty shifter
------------------------
PAST MUSTANGS
------------------------
>1998 GT <----hit by a drunk driver
Last edited by Swannyvill; 11-02-2009 at 01:26 PM .
Vehicle: 01 Cobra
HP: 364
TQ: 351
11-02-2009, 12:05 PM
#13 (permalink )
Crazy SVT Poster
Join Date: July 2008
Location: Temperance MI
Posts: 318
0.64 per day
So i'm just chilling being an engine and then all of a sudden some dude starts trying to take me off!
Wtf!?
11-02-2009, 12:08 PM
#14 (permalink )
Crazy SVT Poster
Join Date: February 2007
Location: fayetteville
Posts: 847
0.83 per day
Quote:
Originally Posted by
MR.ADAMS
So i'm just chilling being an engine and then all of a sudden some dude starts trying to take me off!
Wtf!?
lol
____________________________________
1999 Mustang Cobra #2079
"is that the supercharged one?"
11-02-2009, 01:27 PM
#15 (permalink )
Think with your Dipstick
Join Date: November 2008
Location: Blairsville, Pa
Posts: 500
1.31 per day
Quote:
Originally Posted by
MR.ADAMS
So i'm just chilling being an engine and then all of a sudden some dude starts trying to take me off!
Wtf!?
lol, so wut happend?
11-02-2009, 01:33 PM
#16 (permalink )
I Am The Organizer
Join Date: May 2006
Location: Seattle
Posts: 902
0.70 per day
I'm sorry, this thread made me lol.
____________________________________
99' Electric Green Cobra
Current Mods:
FR500 CatBack, JLT True CAI, 4.10 Gears, SCT Xcal2 tuner, Right Foot, Nazty cut/ported intake manifold, MM Caster Camber Plates, H&R Sport Springs, SLP Long Tube Headers, SLP O/R xpipe, Accel COP's
Old Dyno Numbers w/o headers, mid-pipe & COP's: (Mustang Dyno):
287 RWHP & 289 RWTQ New Numbers pending
Vehicle: 99 Cobra
HP: 285
TQ: 289
11-02-2009, 01:50 PM
#17 (permalink )
Crazy SVT Poster
Join Date: January 2008
Location: NJ
Posts: 541
0.79 per day
$300 to take it off is expensive! At the nudie bar they will take it off for singles....
11-02-2009, 07:42 PM
#18 (permalink )
Insane SVT Poster
Join Date: June 2005
Location: Hickory n.c
Posts: 1,047
0.65 per day
This thread got OFF on the wrong foot from the begining.. LOL
11-02-2009, 08:01 PM
#19 (permalink )
Insane SVT Poster
Join Date: November 2007
Location: new baltimore, michigan
Posts: 1,005
1.39 per day
is it possible to even put it back on once it is off????
____________________________________
2000 GT/ DOHC cobra engine. port and polished heads, BBK cai, FRPP500 cam kit, probe industries forged internals, forged cobra crankshaft, ARP head and main studs and connecting rod bolts, APS head cooling mod, mod cam ponent adj. gears, Steeda UDP, FRPP clutch quadrant, steeda firewall adj., BBK lt headers, bbk o/r H-pipe, bassani exhaust, 2000 cobra-R lightweight aluminum flywheel, spec stage 2 clutch, B and M short throw shifter, aluminum driveshaft, 4.30 gears, 31 spline axles, Eaton differential, rear end girdle, pro-link suspension adj upper control arms, MM strut tower brace
Vehicle: 2000 GT
HP: 339
TQ: 346
11-02-2009, 09:11 PM
#20 (permalink )
Thud Thud Thud Thud Thud
Join Date: March 2007
Location: Berwyn, PA
Posts: 5,035
5.11 per day
Quote:
Originally Posted by
mustangman36578
is it possible to even put it back on once it is off????
Some other forums 50/50
SVTP, no chance in hell unless the OP lets out the brown recluses on us
OP, sorry lol
11-02-2009, 09:21 PM
#21 (permalink )
Crazy SVT Poster
Join Date: July 2008
Location: Temperance MI
Posts: 318
0.64 per day
Off with it's engine!
11-02-2009, 09:41 PM
#22 (permalink )
hey, dont say that!
Join Date: January 2008
Location: missouri
Posts: 481
0.73 per day
it takes itself off
11-02-2009, 09:45 PM
#23 (permalink )
QuenchMyThirstw/Gasoline
Join Date: November 2007
Location: Concord, NC
Posts: 3,180
4.31 per day
Quote:
Originally Posted by
realitygt
it takes itself off
It puts the lotion on it's skin.
11-02-2009, 09:46 PM
#24 (permalink )
Thud Thud Thud Thud Thud
Join Date: March 2007
Location: Berwyn, PA
Posts: 5,035
5.11 per day
In Soviet Russia, Engine takes you off!
11-02-2009, 11:18 PM
#25 (permalink )
QuenchMyThirstw/Gasoline
Join Date: November 2007
Location: Concord, NC
Posts: 3,180
4.31 per day
Quote:
Originally Posted by
01SVTSnake
In Soviet Russia, Engine takes you off!
Thread Tools
Display Modes
Linear Mode
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off