#1 permalink
Rookie SVT Poster
Join Date: November 2005
Location: Ormond beach
Posts: 136
Turbo 03 cobra vs. sc61+meth talon and zx6r w/bolt ons
There was much drama with some import guys on another forum saying the talon couldn't hear the honks blah blah blah........but here it is not a bad vid.
2nd run with the talon getting the hit no brake boosting for me.....
Both runs from behind, the first one you can see us both brake boosting and brakelights coming off at the same time,the car in the far left is a turbo 2v gt with a 50 shot, ran down the talon and the bike.
ENJOY!!
Last edited by Cobra8urZ06; 08-06-2009 at 06:46 AM .
#2 permalink
"CLEAN & MEAN GT"
Join Date: November 2008
Location: Temecula, CA
Posts: 1,639
vid not up
____________________________________
Just a bolt-on GT...
Vehicle: 2000 Mustang GT
#3 permalink
Crazy SVT Poster
Join Date: February 2003
Location: Near Scarlettville as seen in the dvd The Real Toronto
Posts: 950
That was a good race between the Cobra and bike.
____________________________________
Just a cruiser and nothing special. For now at least
#4 permalink
SVT God
Join Date: April 2005
Location: Winston Salem,NC
Posts: 2,008
Doesnt seem like the Talon not hearing the hinks or getting the hit made a difference in the end,really, the beginning either
____________________________________
#5 permalink
griggsg40svt
Join Date: June 2008
Location: virginia
Posts: 9,238
hell of a race between bike and cobra! great vid!
____________________________________
2004 OW SRA swap, coilovers, griggs panhard bar, griggs extreme duty torque arm subframes, hid's,tinted,stage 5 steg, centerforce clutch, 3.73's, 31 spline axles, jlt intake, 60lb injectors, SCT maf, 4lb lower and 2.8 upper, all 10th ann. inserts, slotted rotors, 18" afs reps, 335,30/18 nitto DR's, ford racing valve covers & coil covers, canton polished res., carbon fiber radiator support cover, nitrous spray bar for heat exchanger
Vehicle: 2004 ow coupe
HP: 465
TQ: 480
#6 permalink
Rookie SVT Poster
Join Date: November 2005
Location: Ormond beach
Posts: 136
thanks just getting the kinks worked out with the car, after much brake boosting it seems the clutch wasn't up to the task of holding the torque so a spec 3+ is on the way hopefully that will hold, and i'm switching back to a stock clutch cable and throwout bearing both are a pain in the ass right now.
#7 permalink
U.S Naval Power
Join Date: December 2002
Location: Austin,Tx
Posts: 5,581
cool vids
____________________________________
#8 permalink
Authorized Vendor
Join Date: November 2002
Location: Cheshire, CT
Posts: 44,387
Quote:
Originally Posted by
fiveohpoepoe
Doesnt seem like the Talon not hearing the hinks or getting the hit made a difference in the end,really, the beginning either
You got THAT right! Yeah, just remove the Talon from the equation and leave it to the bike and Cobra. LOL!
____________________________________
2003 DSG Modded Cobra (504rwhp) - Sold Click On The Banner For Gasket Set Info Or To Order
#9 permalink
Insane SVT Poster
Join Date: April 2005
Location: Vermont
Posts: 1,381
That bike hung pretty tight! Nice Cobra, but the 600 did great. Waiting for the guys that beat 600's with their pullied Cobras to chime in lmfao.
____________________________________
#10 permalink
SVT God
Join Date: February 2007
Location: rowland hts
Posts: 3,167
sick nice vids!
____________________________________
Vehicle: 2004 COBRA
HP: 560
TQ: 523
#11 permalink
Rookie SVT Poster
Join Date: May 2009
Location: Orlando, FL.
Posts: 109
that highway looks familiar lol....seems like orlando
#12 permalink
SVT God
Join Date: June 2007
Location: woodbine, MD
Posts: 5,128
good runs
____________________________________
JPC racing built and tuned
built 331 and a V3 vortech
560/520
whats traction
#13 permalink
Z0 SICK
Join Date: June 2007
Location: north jersey
Posts: 375
guy on the bike can ride nice runs
____________________________________
02 C5 Z06 B&B Bullet catbac
THE VETTES GET UM WET!!
03 10th Cobra SOLD
Ported eaton stage 3 metco 3.1 upper 6lb lower idlers jlt ram air borla stingers SCT 2800 SCT Xcal 2 60lb injectors KB BAP LFP heat exchanger accufab throttle body dfx clutch 26 spline steeda anti hop plates MM bushings BF Diff Brace MGW Shifter SLP Line Lock Kit. etc etc
Tuned by LUND 491whp 517wtq on MUSTANG DYNO
2008 Audi A4 DD
#14 permalink
Rookie SVT Poster
Join Date: November 2005
Location: Ormond beach
Posts: 136
thanks........yea the guy on the bike can def. ride, he downshifted, and then again all the way to first i was thinking sh!t he's going to get out hard but good old brake boost was there for backup!! i ran a few gsxr750's from rolls and from 2nd-3rd i hang pretty well but riders make all the difference in the world.
#15 permalink
SVT God
Join Date: April 2004
Location: Phoenix AZ
Posts: 1,786
did you let out in the end? because he shouldnt have pulled you that hard
#16 permalink
SVT God
Join Date: October 2005
Location: Oman
Posts: 2,114
nice kill man, your car sounded good & strong
____________________________________
#17 permalink
SVT God
Join Date: August 2007
Location: Ft. Worth/Temple ,Tx
Posts: 4,556
pulls hard man!
____________________________________1998 Mercury Grand Marquis:
Vehicle: F-150
HP: 440
TQ: 465
#18 permalink
Crazy SVT Poster
Join Date: August 2007
Location: Tucson
Posts: 343
Good race
#19 permalink
So sticky
Join Date: January 2004
Location: WA
Posts: 515
jesus the dude on the 600 looked like a horse jockey he was tiny.... sure could ride the shit out of that bike tho, throttle up between shifts
____________________________________
#20 permalink
Tell me who's watchingggg
Join Date: April 2005
Location: IL
Posts: 7,160
Awesome runs.
Quote:
Originally Posted by
Slo3kgtVtr
That bike hung pretty tight! Nice Cobra, but the 600 did great. Waiting for the guys that beat 600's with their pullied Cobras to chime in lmfao.
+1, just shows what a competent rider can do.
____________________________________
Ported blower, BF TB/Plenum, BF 2.76+idlers, Spec Clutch, Full length Headers
NBM 00 WS6 - Cam, Bolt-ons, Gear - Sold
MB 91 VR4 - Built motor, upgraded turbos, standalone, etc - Sold
Black 95 VR4 - bolt-ons - Sold
Blue & White 02 GSX-R 600 - Dumped & Parted.
Parts bought from:
Vehicle: 2003 Cobra
HP: 502
TQ: 488
#21 permalink
Rookie SVT Poster
Join Date: May 2007
Location: orlando fl
Posts: 114
lol that guy with talon works at my job ....
Vehicle: 2003 cobra kb
HP: 600
TQ: 595
#22 permalink
Crazy SVT Poster
Join Date: February 2004
Location: Southern Indiana
Posts: 968
Your car is just plain sick!!
____________________________________
#23 permalink
I like bacon!
Join Date: June 2003
Location: Bunker Hill,WV
Posts: 3,268
Nice vids...but damn thet 2v turbo didnt exactly do terrible lol.
____________________________________
So tell me is there any tread left on the tires at all, or at this point would it be like throwing a hotdog down the hallway?
Mustang #8 or 9...ive lost count lol
1993 LX 5.0 5spd...the new project..that juuust never got started
1995 Jeep Cherokee 2dr mild lift
, on 33x10.50's
#24 permalink
Crazy SVT Poster
Join Date: June 2006
Location: long beach california
Posts: 252
nice race man
____________________________________
2001 mustang GT with 04 cobra motor 460whp 470wtrq
2003 SVT cobra 306 block 8:8.1 compression crower cams stage 3 ported heads KB 2.8H blower GT500 fuel pump 60# injectors K&N intake Accufab throttle Body Bassani X-pipe and cat back. 15 pound of boost butting down 647 whp and 632 wtrq, on 91 octane and 15 degrees of timing.
24 pounds with C16 coming soon.
#25 permalink
Rookie SVT Poster
Join Date: November 2005
Location: Ormond beach
Posts: 136
Quote:
Originally Posted by
T BAG
did you let out in the end? because he shouldnt have pulled you that hard
i let out at 140 my brakes weren't very happy from all of the brake boosting and stopping at 140+ so i was just hoping it would stop from there
Quote:
Originally Posted by
02YZ125
jesus the dude on the 600 looked like a horse jockey he was tiny.... sure could ride the shit out of that bike tho, throttle up between shifts
yeah cool guy, i liked his no-lift shift mod lol he def. can ride, i've seen guys on 1000cc bikes be in the wrong gear and look like an ass against a lesser car.
Quote:
Originally Posted by
FineLineMtrSprt
Nice vids...but damn thet 2v turbo didnt exactly do terrible lol.
not at all thats the guy who built my kit, he was on 12psi and a 50 shot with a ton of spark blowout, and still was workin' people
Thread Tools
Display Modes
Linear Mode
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
, on 33x10.50's
Linear Mode
