Results 1 to 15 of 15
Thread: fastest 4 wheeler
03-23-2005, 01:31 PM #1
fastest 4 wheeler
I was in an argument with a kid I know and the retard said his banshee would run a 3.9 second 1/8 mile. I was wondering what the fastest 1/8 was on a 4 wheeler. I don't mean a jet bike or anything but a real bike with a two cylinder banshee motor. Thanks for the help guys. Jerrad"Initial Success or Total Failure"
03-23-2005, 01:53 PM #2
3.9 is a little to fast even for a banshee!!2005 Mustang GT Black w/ Red Leather
1999 VW Beetle Blue w/ daisy wheels (wifes)
1995 Aspire "Gas Car"
1993 Jeep Wrangler 11 1/2" Lift 35" tires 302 swap, C4, 4:10 gears
1979 Ford Bronco 4" lift, 33's, 460 V8
Too Many other toys to list!!
03-23-2005, 01:55 PM #3
Well he first said it ran tht in the 1/4 and I told him that 8000hp top fuelers dont run that fast. Plus 4 whelers run the 1/8 99% of the time.
03-23-2005, 02:26 PM #4
got a scrambler 400 that runs very well mods topend pipe,jetkit,1tooth bigger on the rear,blue/green clutch spring,carbonfiber reedvalves,wiseco piston,dayco belt,uni air filter,lowered 2in all around,itp wheels,must have alot done to the banshee.
03-23-2005, 02:30 PM #5
5.1 at 147 in the 1/8th well this is a cars 1/8 mile so could the banshee launch hard enough to get that kind of time with out breaking axles? What did you 400 run Bottlefed?
03-23-2005, 06:05 PM #6
look at it this way...my buddy has a banshee that he does sand drags with..sand drags run 100yrd./300 ft. His banshee runs 4.0's all day long thats his dial in...hes ran 3.8's 3.9's but 3.8's are rare....Ex- 1988 GT
GT40 upper and lower
Windsor jr heads.
Dyno tuned @ 310hp 340 ft/lbs
CRASHED : 1997 F-250 powerstoke
Straight piped w/ 3" down pipe
Dyno'd before chip 220hp
(couldn't read torque cause I couldnt get the optical sensor to work correctly.)
03-23-2005, 06:50 PM #7
saw one the other night run in the 7's at 93mph in the 1/8th..
That guy is a tool, and I hope his kids are hit by a truck and his wife is DP'ed by 40 dudes with AIDS.
03-23-2005, 07:16 PM #8
- Join Date
- September 2004
I know his Banshee probably has some stuff done to it but, isn't the Raptor the fastest?
03-23-2005, 07:18 PM #9
I would say the fastest stock 4-wheeler out there is a YFZ-450."I call out your God, until before me he stands--but don't send me Jesus; he's only a man." - GWAR
03-23-2005, 07:42 PM #10Originally Posted by BuckChoklit2002 Torch Red Mustang GT
2011 F150 Lariat CC 5.0L 4x4 Off Road
2008 F150 Lariat 5.4L Triton Sold
2011 Ford Edge Limited FWD
2005 Chevy Impala DD sold
03-23-2005, 10:37 PM #11
Well, I have a Yamaha Raptor 660R.
Complete with a Dynojet Stage 2 jetkit, GYT-R pipe and K&N Filter with airbox mod.
Also a smaller front sprocket..
I've never ran it down the 1/8th but just drag racing across an open field here a couple weeks ago.
I lost to a 2005 Honda 450R..
That wasn't stock..
He was packin a jetkit, pipe and something else..
The kid who owns it, had just bought it two days prior..
Either way, I lost..
Anyhow, 3.9 in the 1/8th?
Damn.. that's ffffaaasssssst..
I don't think a Banshee is capable of that. Period.
Last edited by 03Cobra_hopeful; 03-24-2005 at 04:21 PM.
03-23-2005, 11:02 PM #12
Well guys I looked it up and a guy said that if a banshee runs under 5's in the 1/8 then there is nothing banshee about it except the plastic. He bet my cousin that he could run a 8 in the1/4. I shit you not that is what he said so were going to the track and going to see what he turns. He will run out of gear after the 1/8 and the rest he'll just be ****ing up his motor.
03-24-2005, 10:16 AM #13Originally Posted by BuckChoklit
yfz450 is quicker but not faster then the raptor.
03-24-2005, 10:17 AM #14Originally Posted by 03Cobra_hopeful
this isnt feesable. that would put it at a 9 second quad...and we know thats not happening
03-24-2005, 10:43 AM #15
- Join Date
- July 2004
- Cox's Creek, KY
This banshee has been in the 5's many times in the 8th. It's a 350, with alky and nitrous.
It would take a LOT of work, but with the help of the newer engine cases that will accept larger cranks, the ability to run snow-mobile cylinders, different frame technology, and of course alky and nitrous, I could see where a Banshee might get deep into the 4's, but 3's are still a little far-fetched I believe. Never know though, the Banshee drag world is ever evolving, much like Mustangs.Proudly supporting www.speedydyno.com
Laser Red 96 Cobra, #7337 of 7496
307 rwhp, 306rwtq N/A
7.89 @ 86.7 in the 1/8