Results 76 to 100 of 360
12-25-2007, 11:54 PM #76
I'll post a pic and sound clip once I get my tranny back in the car. I have Kooks L/T's, Dr. Gas 3" X-pipe no cats, to 3" flow tubes feeding 3" Spintech Sportsman street mufflers to 3" dumps. I have no idea what it will sound like since it all got installed when the tranny came down for the T-56 swap. Should sound pretty sweet when it's done.
01-03-2008, 08:56 PM #77
01-03-2008, 09:27 PM #78
Naz Ported 01 heads, Comp Cams custom N/A grind, Full catless bassani(soon to be replaced w/ SHM stepped long tubes)
Startup & IdleModular Performance Built Boss 324 shortblock, C head swap, Naz Ported 01 heads, Custom N/A Comp Cams, Naz ported Shortrunner, 03 cobra 39lb injectors and maf, JLT RAI, ARH SS 1 3/4 & OR X, Bassani Catback, 4.30s, and other supporting mods
01-07-2008, 02:43 AM #7910 second car, 14 second driver
Built & TUNED BY: Modular Powerhouse
Motor Built by: Proline Racing\
1st and only run with new set-up: 14.1 @ 125....Should have bought a Supra!!
01-12-2008, 10:48 AM #80
You have my dream car, I had to settle for a Novi instead of the twins.
01-13-2008, 10:44 AM #81
Here is a quick link to a short burn out vid:
Sound is not perfect, done with a cheap digital camera, but sounds ok.
Stock everything except for SLP LM1 catback Oh yeah, and the guy filming is my brother, please keep the comments to a minimum, hes a newb.
Last edited by etatum21; 01-13-2008 at 10:46 AM.
01-14-2008, 12:13 PM #82
Please excuse the sputtering, I had just warmed her up after sitting all winter so the gas was mostly water.
Mac headers with a Mac H pipe and Flowmaster cats and downpipes. Not too loud when she cruises but open her up and she likes to scream. Quiet enough to not get a ticket yet, but loud enough to still piss off the neighbors. I am content.
"Gripping the wheel, his knuckles went white with desire.
The wheelsof his Mustang exploding on the highway like a slug from a .45.
True death: 400 horsepower of maximum performance piercing the night... This is black sunshine"
Mac 1-5/8 LT's, BBK o/r H-pipe, Flowmaster delta 40's, 4.10's, Top/bottom rebuilt, .20 over bore increase, MSD ignition, Mac CAI, Motorspots alum. driveshaft, Steeda Tri-Ax, H&R springs, Speedcal, Foose Nitrous 18x8/18x10, Toyo T1R 235/35 275/35's, Cervinis stalker front fascia
01-23-2008, 09:41 PM #83
01-25-2008, 12:09 AM #84
Nothing new but bbk o/r H and flowmaster cat back (american thunder)
http://s97.photobucket.com/albums/l2...t=MOV00108.flv98 Cobra-bolt ons, 410's. Sold, June 2010
94 Gt- Bone stock, 14.6 @ 94mph, 1.9 60' on street tires. Sold
01-29-2008, 10:30 PM #85
One last video with the Flowmasters before the Magnaflow Magnapack's go on
Warm start, idle, and revs...
http://www.youtube.com/watch?v=SmP7rrb_PsYMy Pics My Videos Mid-Atlantic Cobra Association
BBK Longtubes & O/R H pipe, Magnapacks, WMS Intake, Centerforce DF Clutch, Spec Aluminum Flywheel
Koni Yellows, MM Coil Overs, A Arms, Full Length Subs, CC Plates, and Aluminum Rack Bushings, Steeda Sway Bar
Eaton Posi Diff, FRPP 3.73's, Moser 31 Splines, DBA Slotted Rotors, Hawk HPS's, and 95' Cobra R's w/295 Kuhmo XS's
01-30-2008, 02:30 PM #86
- Join Date
- January 2004
I have no idea what the part number is because I bought them like 3 years ago now. But I believe its just the normal borla catback, I think they are called the stingers. As far as a steeda part number goes, give them a call.... I think the catback I bought was actually meant for a 99+ GT because at the time they didnt have a specific one for the 96-98 Cobra.
03 Cobra IRS, Bilstien shocks and struts, H&R race springs.
Hooker LT's, O/R X, Steeda catback, SCT chip
02-09-2008, 06:11 PM #87
http://my.break.com/Content/view.aspx?ContentID=449924 newly updated with my slp exhaust that i bought from from norcal5.42012 F150 FX4 Super Crew 5.0
95 Cobra -SOLD
03 Level II FX4 Ranger - SOLD!
4 FEB 2006 * 12 OCT 2006
NEVER FORGIVE - NEVER FORGET
02-09-2008, 06:33 PM #88
Mac O/R H pipe and 2 chamber 40 series Flowmasters
[ame="http://youtube.com/watch?v=l2B0wmzR5YU"]YouTube - 98 Cobra Dyno1[/ame]
1998 SVT Cobra #4941 of 5174 built on June 19,1998 (1 of 674 with same options) 263rwhp/258rwtq (OEM engine,not Aluminator)
Aluminator Short Block (10:1), Lightly ported B heads, 4.30s, WMS Velocity Tube with K&N, Sniper Tuning, Pro 5.0 shifter, March 1158 fluid damper, Mac O/R H pipe, Flowmaster orig. 40's, King Cobra clutch, D/S rotors, MM C/C plates, MM Solid steering rack bushings, Termi front control arms, Steeda LCAs, Strange 31 splines, GT500 diff, LPW girdle, H&R SS Springs, Tokico HP struts and shocks, Mac subframes, Saleen wheels, Saleen S-281 spoiler, sequential tails, H.O. Fibertrends 1" rise OEM hood, etc.
"HEY BUDDY, YOUR HONDA SUCKS!!!"
Parts awaiting install... NOTHING... Finally
SVT center cap decals FOR SALE
SVT and "Running Pony" Tach Decals FOR SALE
02-14-2008, 09:40 PM #89
Wide open h pipe...
[ame="http://www.youtube.com/watch?v=SCbJdLrMALw"]YouTube - Wide Open H Pipe[/ame]
Better quality and downloadable
BBK O/R H pipe with Magnaflow Magnapacks...
[ame="http://www.youtube.com/watch?v=Ww6ewWJIQ38"]YouTube - Magnaflow Magnapacks[/ame]
Better quality and downloadable
02-15-2008, 07:55 PM #90
I've always been partial to the 5.0s, but that is a SICK sounding 4v you got there ciotti! That last clip in the 2nd vid where you are dirving towards the camera made me feel happy in my pants
Last edited by golden_eye; 02-15-2008 at 07:57 PM.1994 Cobra - Pushrod Power!
2011 F-150 - Ecoboost
Let's face it, there's just not enough time in this busy world to show everybody the courtesy of a good strangling.
03-13-2008, 08:29 PM #91
03-13-2008, 08:44 PM #92
03-13-2008, 09:07 PM #93
03-13-2008, 09:24 PM #94
04-03-2008, 11:29 PM #95
04-04-2008, 02:04 AM #96
Is that at silver Creek park?97 Cobra Nitrous'd--- Sold
92 11 sec Talon--- Sold
03 bagged s10--- Sold
91 Crawler Exploder 4x4---DD
One Big Ass Mistake America
04-27-2008, 01:44 AM #97
- Join Date
- April 2008
- Bay Area, Ca
1998 Cobra with custom made o/r X and SLP LM1 catback.
04-27-2008, 01:51 AM #98
04-27-2008, 02:36 PM #99
wow does SLP sound like garbage. Way to pay 500 dollars from some exhaust tubing and a small expansion put in the tubes...2006 Mercury Mariner Hyrbid. Silver. AWD. 30+mpg
2011 GSXR 600. Moto GP slip on and Hotbodies undertail
1997 Black/Black Cobra Coupe. Fully forged .020 over. 8.5:1 compression. 11cc dished mahle pistons and modmax h-beam rods, Procharger P1SC 13psi, IMRC deletes, T-rex inline, 340lph in-tank, SCT2800 MAF w/ MAFIA, TKO600 w/ steeda triax, Spec stage 2, Auburn Pro diff w/ FRPP 4.10's, FRPP C springs, Tockico Illuminas, MM FLSFC's, CC plates and rear upper/lower control arms, AEM wideband, 18x9/10 Black saleens w/ kumho mx 245/40/18's and 305/35/18 MT ET streets, upr offorad X and dynomax VT's dumped, Aluminum driveshaft w/ steeda yoke and a few other misc items.
04-28-2008, 11:45 AM #100
- Join Date
- April 2005
- Overland Park, KS