Results 1 to 12 of 12
  1. #1
    13mm or 1/2in??? RacerXHG's Avatar
    Join Date
    November 2009
    Location
    NH
    Posts
    292

    FS: Eaton M112 SVT 5.4L BLOWER

    FOR SALE: 00 BLOWER, PLENUM, TB and Bypass

    $370.00!!! Includes shipping to lower 48!!!

    She's pretty, clean and tight if anyone wants to put up a bid. Stripped of teflon coating (extends life with NO power loss), was lightly rebuilt before I got it, new oil, coupler is ok. Accidental purchase and need to at least break even. Out of an 00 SVT Lightning. Will fit on 99 to 04. The blower case has 99/00 bolt pattern, but, has the ability to fit the 01 to 04 with extra holes in the bolt flange (has the extended flanges). Shipping to lower 48 preferably. PM or post with questions or offers, thanks. Make an offer!
    Bill
    MercuryMarauder.net Forums
    MercuryMarauder.net Forums
    Last edited by RacerXHG; 01-11-2010 at 11:15 AM.

  2. #2
    Insane SVT Poster
    Join Date
    April 2009
    Location
    Parts Room
    Posts
    1,243
    Stripped of the Teflon coating and no loss of power should not be combined in the same sentence.
    It will most definitely make less boost than other setups pullied the same.

  3. #3
    13mm or 1/2in??? RacerXHG's Avatar
    Join Date
    November 2009
    Location
    NH
    Posts
    292
    Then you can let Stiegemeier and his dyno graph that shows different that his info is wrong.

    These guys are some of the best around.

    http://dynobob.websitetoolbox.com/po...ight=stripping
    Last edited by RacerXHG; 01-08-2010 at 01:44 PM.

  4. #4
    Crazy SVT Poster
    Join Date
    August 2005
    Location
    Levant, ME
    Posts
    245
    Quote Originally Posted by Parts-is-Parts View Post
    Stripped of the Teflon coating and no loss of power should not be combined in the same sentence.
    It will most definitely make less boost than other setups pullied the same.

    Not saying that what you said is not true but...... The only way to be sure would be to dyno your vehicle with the coating, take it off then dyno it again with the same conditions. Even if it were different I could not imagine much difference. Similar pullied setups often dyno differently anyway. Just saying.

    Jaimie

  5. #5
    13mm or 1/2in??? RacerXHG's Avatar
    Join Date
    November 2009
    Location
    NH
    Posts
    292
    Well, no one would have to ever worry about flaking and possible problems associated with that! Crap doesn't even stay in my frying pan, definitely don't want it flying around and catching under valves...

  6. #6
    13mm or 1/2in??? RacerXHG's Avatar
    Join Date
    November 2009
    Location
    NH
    Posts
    292
    TTT!!! Good deal!

  7. #7
    13mm or 1/2in??? RacerXHG's Avatar
    Join Date
    November 2009
    Location
    NH
    Posts
    292
    Bumpity!

  8. #8

  9. #9

  10. #10
    New SVT Poster B.D.A.'s Avatar
    Join Date
    January 2010
    Location
    towanda, KS
    Posts
    16
    no i'm someone different, i haven't figured out how to pm on this site so email me or pm

  11. #11
    New SVT Poster
    Join Date
    February 2007
    Location
    S. Florida
    Posts
    11
    will you sell just the plenum and TB?

  12. #12
    New SVT Poster
    Join Date
    February 2010
    Location
    Sasquatch Country!
    Posts
    1
    PM Sent

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •