Page 1 of 2 12 LastLast
Results 1 to 25 of 46
  1. #1
    Authorized Vendor Kelly@Livernois's Avatar
    Join Date
    April 2010
    Location
    Florida/Michigan
    Posts
    37

    4.6 / 5.4 cnc porting service sale! $599

    We are offering a flat rate on CNC head porting services for your 4.6 and 5.4 modular cylinder heads.

    CNC Service by Livernois MotorSports.

    New - Livernois Motorsports - Home

    TFS 2V heads are not included...please contact me for pricing on those

    Price is for bare heads shipped to us.

    2V PI Heads:

    Stock valves: 207 int / 195 exh
    +1mm valves: 225 int / 205 exh

    3V Heads

    Stock valves: 280 int / 185 exh
    Oversize valves: 295 int / 200 exh

    4V Heads 03-05 Cobra/Mach/Aviator
    Stock valves: 310 int / 255 exh
    Oversize valves: 330 int / 275 exh

    4V B-Heads 1993-1998 Cobra/Mark 8
    Stock valves: 321 int / 235 exh
    Oversize valves: N/A, figure about 3-5% over stock valves

    Ford GT Heads
    $649


    These heads work. Proven over and over again.

    For more info, or for ordering please send me a PM.

    Thanks

    Kelly

  2. #2
    Authorized Vendor Kelly@Livernois's Avatar
    Join Date
    April 2010
    Location
    Florida/Michigan
    Posts
    37
    EDITED. $599 is the current pricing for a CNC port job, on the following heads.

    2V NPI/PI
    3V
    4V: 03-05 Mach/Cobra/Aviator - 93-98 B Heads

    2V TFS: $649
    Ford GT 4V : 649
    Last edited by Kelly@Livernois; 09-01-2010 at 01:11 PM.
    Kelly Aiken - Sales
    Livernois Motorsports
    727-967-3461
    [email protected]
    http://www.facebook.com/LivernoisKelly

  3. #3
    Authorized Vendor Kelly@Livernois's Avatar
    Join Date
    April 2010
    Location
    Florida/Michigan
    Posts
    37
    $599 for the CNC Port.

    Let's get some heads ported!

  4. #4
    Man Pedal User
    Join Date
    October 2007
    Location
    Texas
    Posts
    3,123
    nice!

    what would the extra cost for 4v heads be, to add a 5 angle valve job to the porting, and sending the heads with valves/springs installed?

    pm if necessary.

    Thanks


  5. #5
    Rookie SVT Poster
    Join Date
    May 2008
    Location
    New Bern NC
    Posts
    129
    I wish I saw this before I ordered my TF's. Oh well

  6. #6
    KING COBRA
    Join Date
    January 2005
    Location
    Los Angeles
    Posts
    302
    No 99 or 01 C heads? Do you have before and after pictuers of the ports?
    Thanks,
    Kenny

    1999 Black SVT Cobra

  7. #7
    Authorized Vendor Kelly@Livernois's Avatar
    Join Date
    April 2010
    Location
    Florida/Michigan
    Posts
    37
    Quote Originally Posted by Lstruck03 View Post
    nice!

    what would the extra cost for 4v heads be, to add a 5 angle valve job to the porting, and sending the heads with valves/springs installed?

    pm if necessary.

    Thanks
    I will send you a PM.

    Quote Originally Posted by homestead_us View Post
    I wish I saw this before I ordered my TF's. Oh well
    No biggy, just let me know if you need anything else in the future! I'll be glad to take care of you.

    Quote Originally Posted by HitmanKB View Post
    No 99 or 01 C heads? Do you have before and after pictuers of the ports?
    No. And No, but I can probably get you some pictures if it means anything to you. Looks like a port, with CNC marks.

  8. #8
    KING COBRA
    Join Date
    January 2005
    Location
    Los Angeles
    Posts
    302
    Quote Originally Posted by Kelly@Livernois View Post
    No. And No, but I can probably get you some pictures if it means anything to you. Looks like a port, with CNC marks.
    Pictures usually sell better than words. Just wondering why no 99-01 C head option? If I wanted this I would have to find 03-04 C head cores to send in?

    Sent you a PM.

  9. #9
    Authorized Vendor Kelly@Livernois's Avatar
    Join Date
    April 2010
    Location
    Florida/Michigan
    Posts
    37
    Quote Originally Posted by HitmanKB View Post
    Pictures usually sell better than words. Just wondering why no 99-01 C head option? If I wanted this I would have to find 03-04 C head cores to send in?

    Sent you a PM.
    I understand that, I will see what I can do for pictures.

    The 99/01 heads have not been a big demand until recently.

    Thanks.

  10. #10
    Authorized Vendor Kelly@Livernois's Avatar
    Join Date
    April 2010
    Location
    Florida/Michigan
    Posts
    37
    TTT for the weekend!

  11. #11
    Installing L&M heart 04MystiCobra's Avatar
    Premium Member
    Join Date
    January 2004
    Location
    CC ,TX
    Posts
    8,620
    check PM
    2004 Mystichrome
    #1012/3768 04 Cobra
    #258/1010
    Born 12/22/03


  12. #12
    Authorized Vendor Kelly@Livernois's Avatar
    Join Date
    April 2010
    Location
    Florida/Michigan
    Posts
    37
    PM's replied to.

    Thanks guys/gals! Keep em coming in!

  13. #13
    Authorized Vendor Kelly@Livernois's Avatar
    Join Date
    April 2010
    Location
    Florida/Michigan
    Posts
    37
    Still offering the $599 price.

    PM me if you want to have the best performing CNC port job available!

    Kelly

  14. #14
    I'm a Lead Farmer Finaltheorem47's Avatar
    Join Date
    February 2008
    Location
    Northern Virginia
    Posts
    2,157
    Questions:

    - You don't offer this for 99/01 4v heads?
    - Is it 450 or 599 for a pair of heads?
    - Is it 450 for one and 599 for a two heads?
    - Do you do 4v Navigator heads?



    Quote Originally Posted by James Snover View Post
    It's a trap. The snowmen are up to something, I know it.


  15. #15
    Authorized Vendor Kelly@Livernois's Avatar
    Join Date
    April 2010
    Location
    Florida/Michigan
    Posts
    37
    Quote Originally Posted by Finaltheorem47 View Post
    Questions:

    - You don't offer this for 99/01 4v heads?
    - Is it 450 or 599 for a pair of heads?
    - Is it 450 for one and 599 for a two heads?
    - Do you do 4v Navigator heads?
    The 99/01 CNC program is not available at this time.

    It is $599 for a pair.

    It is $325 for one head

    The 4V Navigator CNC program is also, not available at this time.

    Thanks

    Kelly

  16. #16
    I'm a Lead Farmer Finaltheorem47's Avatar
    Join Date
    February 2008
    Location
    Northern Virginia
    Posts
    2,157
    Quote Originally Posted by Kelly@Livernois View Post
    The 99/01 CNC program is not available at this time.
    Quote Originally Posted by Kelly@Livernois View Post
    The 4V Navigator CNC program is also, not available at this time.

    Bad news for me.... x 2

    lol thanks...

    If you do end up setting up a program for that, I'd be interested.

    -Joe

  17. #17
    Authorized Vendor Kelly@Livernois's Avatar
    Join Date
    April 2010
    Location
    Florida/Michigan
    Posts
    37
    I apologize Joe.

    I will see if I can get any information on those programs.

    Thanks for your time.

    Kelly

  18. #18
    Kelly,As requested.
    Last edited by Ironhand; 09-02-2010 at 01:18 PM.

  19. #19
    KING COBRA
    Join Date
    January 2005
    Location
    Los Angeles
    Posts
    302
    Any word on the 99/01 program???

  20. #20
    Rookie SVT Poster
    Join Date
    August 2005
    Location
    Georgia
    Posts
    29
    +1. When will the 01 cobra heads be supported. I dont want to buy 03 cobra heads and then have to port them.

  21. #21
    SVT-DROP snakerider's Avatar
    Join Date
    August 2007
    Location
    Bay Area, CA
    Posts
    1,952
    Is it still $599 to port 03 cobra heads? And what if I already have heads asasembled with new guides and springs and valve seals and 5 angle valve job, can I still have them ported?
    Toy # 1 Whippled Cobra. Tuned By Bob Kurgan @ KurganMotorsports
    *** Too Many Mods To List***
    Built motor, Whipple 2.9 E85 = 7XXrwhp 7XXrwtq SAE 8XXrwhp 7XXrwtq STD
    Best track time 11.5@126mph with IRS. ( Eaton,stock motor)
    Dave's Engine Machining
    Toy # 2 2007 Mercedes S550 AMG Luxury cruiser
    Toy # 3 2001 Honda CBR 600 F4I
    DD 2000 Acura 3.2TL Premium (Navi)
    Instagram @SVT_DROP

  22. #22
    SVT God Teej281's Avatar
    Join Date
    August 2007
    Location
    Hanover, PA
    Posts
    2,010
    I'd possibly be interested in a port job later this summer.



    It's just a GT...for now

    Bolt-ons and 03 Cobra IRS equipped

  23. #23
    Quote Originally Posted by digiam42 View Post
    +1. When will the 01 cobra heads be supported. I dont want to buy 03 cobra heads and then have to port them.
    I'm not sure when/if we will ever develop a port for the 99/01 head unfortunately.

    Quote Originally Posted by snakerider View Post
    Is it still $599 to port 03 cobra heads? And what if I already have heads asasembled with new guides and springs and valve seals and 5 angle valve job, can I still have them ported?
    Yes, if you sent them completely bare/clean we could port then for $599 + return shipping.

    Thank you,

    Rick

  24. #24
    KING COBRA
    Join Date
    January 2005
    Location
    Los Angeles
    Posts
    302
    Quote Originally Posted by Rick@Livernois View Post
    I'm not sure when/if we will ever develop a port for the 99/01 head unfortunately...
    Rick
    That sucks!!!

  25. #25
    Footloose engine281's Avatar
    Join Date
    January 2005
    Location
    santa fe nm
    Posts
    227
    What about heads off a 2011 GT500? What is the price on those?

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •