Results 1 to 17 of 17
  1. #1
    Flying For A Living dkscobra2003's Avatar
    Join Date
    October 2002
    Location
    Savannah, GA
    Posts
    1,295

    Finally got my FRPP Handling kit on my 2011












    Next Mods....

    Aluminum Driveshaft & Drive Shaft Loop, and Shelby Kicker System.

    Please chime in.

    I am looking for a place to do some custom work in my trunk area for the kicker system.
    Last edited by dkscobra2003; 11-26-2011 at 10:58 AM.
    Darryl Retired (Air Force) of 24 years.
    MEMBER OF MID-ATLANTIC COBRA ASSOCIATION (MACA)
    ** 2011 Shelby GT500 Sterling Gray/2009 Ford Edge Sport **
    *NEW 2013 MMR 5.8L Motor(Pro Mod Sleeved), Cammed, MBRP 1 7/8 Longtube Headers w/MBRP H-Pipe, TVS Supercharger, 2.4 Upper, 10% Innovative West Lower, Mcleod RXT (Twin Disc) Clutch, Bosch 72# Injectors, FRPP Dual 65MM TB/JLT BIG AIR 127mm and other goodies, BILLY BUILT. B.A.P. ENHANCED*
    Carbon Fiber Vinyl Stripes from BIG WORM Graphix
    Mods: Shelby GT500 Handling Pack--M-FR3-MSVTA, Shelby lower control arms, BMR Upper Mount and Upper Control Arm, BMR Panhard bar, Aluminum drive shaft(The Drive Shaft Shop), BMR Front Driveshaft Loop, Metco Aux Idler, Jon.Lund Tuned of LundRacing(93 street),Red-line Tuning Hood Shocks, JLT Carbon Fiber CAI, Radiator Cover (Carbon Fiber), Fuse Box Cover (Carbon Fiber) Hood Vent (Carbon Fiber), Rear Spoiler Lip (Carbon Fiber), Lethal Performance Aero-Force Gauges (Dual set), Alcoa 50th Anniversary Super Snake Wheels, Hankook Ventus V12 evo K110 tires, Embroidered Carroll Shelby Front & Rear Headrest & Autographed Carroll Shelby Dash Plaque.

    **SOLD** 23 AUG 2009 ** 2003 SVT Dark Shadow Gray Cobra
    TUNED 622HP/579TQ

  2. #2
    nate@bobsautosports 5spd07gt's Avatar
    Join Date
    July 2009
    Location
    Harpers Ferry
    Posts
    7,365
    Nice man. I have been wondering what your screen name was ever since we met on the Catoctin cruise. Car looks great

    Mid Atlantic Cobra Association VMP Tuned 2.3L TVS Air Ride Equipped
    FOR SALE - $38,500 OBO
    @baggedcobra @bobsautosports @the_raptor_project

  3. #3
    Flying For A Living dkscobra2003's Avatar
    Join Date
    October 2002
    Location
    Savannah, GA
    Posts
    1,295
    Thanks, Bro.

  4. #4
    Cleveland's OG fiveoh2go's Avatar
    Join Date
    November 2004
    Location
    VA
    Posts
    4,972
    Very clean, love the Alcoa rims!
    1993 Vibrant Red Mustang Cobra



    2003 DSG Terminator Coupe -- SOLD

    Proud Member of the Mid-Atlantic Cobra Association

  5. #5
    Alexis Texas' #1 fan F8LBITEva's Avatar
    Join Date
    August 2005
    Location
    Northern Virginia
    Posts
    9,210
    I love that car man!

  6. #6
    Mid-Atlantic Cobra Assoc. IronTerp's Avatar
    Join Date
    November 2003
    Location
    Nashville, TN
    Posts
    16,893
    Very nice D! What does the FRPP kit consist of?
    .


    2007 SHELBY GT500 - WHITE w/ BLUE STRIPES
    Posi Ported Eaton w/2.40" Upper Pulley, CJ 65mm TB w/ L&M plenum, JLT 123 CAI, Magnaflow X Pipe/Axle Back, Blankenship tune, 3.73 FR gears, AFCO HE, DSS Aluminum Drive Shaft. (595 RWHP, 582 RWTQ)

    2003 DSG COBRA - 10.88 @126.87 w/ 1.62 60' - SOLD......
    6 Spd/IRS, Ported Eaton, 2.90/6 lb combo, JLP Tune, LT's, Dragon TB/Penum (529.41 RWHP, 513.76 RWTQ)


    MID-ATLANTIC COBRA ASSOCIATION (MACA)

  7. #7
    nate@bobsautosports 5spd07gt's Avatar
    Join Date
    July 2009
    Location
    Harpers Ferry
    Posts
    7,365
    Quote Originally Posted by IronTerp View Post
    Very nice D! What does the FRPP kit consist of?
    If its like the same one I had on my car its the adjustable struts, springs, and front and rear sway bars.

  8. #8
    Premium Member SVTORANGE's Avatar
    Premium Member
    Join Date
    June 2007
    Location
    Maryland
    Posts
    7,607
    Beautiful - looks hot lowered
    CRAZY FROM THE HEAT WINDOW TINTING

    2009 CYBER GREY CORVETTE ZR1

    1993 RED FORD MUSTANG NOTCH

  9. #9
    One more lap! gcassidy's Avatar
    Join Date
    November 2003
    Location
    Silver Spring, MD
    Posts
    9,378
    I saw it from underneath when being done, looks even better from that angle.
    Greg
    '98 SVT Mustang Cobra-NASA TTB *Retired
    '02 SVT Focus-only tracked a little
    '01 Crown Vic Police Interceptor


    Videos on vimeo http://www.vimeo.com/user919253/videos

    All cars are BAP Enhanced

    Proud Member of the Mid-Atlantic Cobra Association


  10. #10
    I miss my torque sunburned's Avatar
    Join Date
    May 2005
    Location
    DC
    Posts
    12,846
    Siiick ride Darryl. I'm not sure I even knew you had a Shelby. Shows how much I get on here anymore.
    2004 Jeep Grand Cherokee Overland
    SOLD - 1998 Mustang Cobra - aluminum 298ci stroker, FR500, T-trim, T56, Griggs, BBS, 550+whp
    SOLD - 2003 Mustang GT convertible - S-trim, '03 Cobra IRS, MM, Work, 380whp

  11. #11
    Authorized Vendor mixxer's Avatar
    Join Date
    August 2005
    Location
    pottstown,pa/near phila
    Posts
    5,556
    need an adjustable panhard bar
    Evolution Performance, Inc. - S197 and Shelby GT500 Specialists!


    Evolution Performance, Inc.
    3606 Market St.
    Aston, PA 19014
    (610) 485-3596
    www.evoperform.com


    Follow Evolution Performance, Inc. On Facebook

    Watch Evolution Performance, Inc. Videos!

    First Shelby GT500 In The 11's, 10's, 9's, 8's and 7's...!

  12. #12
    Flying For A Living dkscobra2003's Avatar
    Join Date
    October 2002
    Location
    Savannah, GA
    Posts
    1,295
    Thanks Everyone.

    Greg, I will have to get that look at the underside, when the Aluminum Driveshaft and LCA's go in. =)

    Dwight,

    The kit I got was specifically designed for the 2011-2012 SVT GT500 Handling Pack (Coupe) parts listed below.

    Adjustable Dampers M-18000-C
    Lowering Springs M-5300-L
    Anti-roll bar kit M-5490-B
    Upper Strut Mount M-18183-C
    Jounce Stops M-5570-A
    Adjustable Panhard Bar

    Lowers car approximately 1.250" and handles nice. No issues, or rough ride.

    All components are designed to work together as a package

    Dampers are adjustable and manufactured by Dynamic Suspensions. (the same company that makes dampers for the Ford Racing FR500C Mustang race car)


    Anyone interested in my 2011 GT500 Stock Suspension parts, PM me.

    Last edited by dkscobra2003; 11-28-2011 at 03:14 PM.

  13. #13
    FKNGFST Bonefish's Avatar
    Join Date
    September 2004
    Location
    Clarksburg, Maryland
    Posts
    7,409
    Looks good man! I love the Alcoa wheels. If I had kept my 09..those were the wheels I was getting!
    Mike K

    Cobra/Shelby
    98 Cobra Chrome Yellow....GONE!
    04 Cobra VERT SY...GONE!
    09 Ford Shelby GT500 Vapor w/Black...GONE!
    11 Ford Shelby GT500 Vert Kona Blue w/white stripes!

    MODS: Bob's Autosport LCA, BMR Adj UCA, BMR Mounts for UCA and LCA, FRPP Springs, BMR Adj. PH Bar, BMR PHB Brace, Revan Racing HE w/Dual Fan, 3x reservoir, 170* T-Stat, 2.50 Pulley with 90mm idler, Jon Lund Tune on SCT X Cal 3, Aeroforce CNF Dual Gauges in SOS Dual A Pillar Pod, DSS Alum 1 Piece DS, MBRP Headers, MBRP Catless H-Pipe, FR 65mm TB, JLT Kona Blue 123mm CAI, Bob's Oil Separator, IW 10%, Ceramic Tint, complete front done with Paint Protection Film and TF Mach 6 brushed aluminum w/ chrome lips 20x9 20x11 with Nittos

    Thanks to Van at Revan Racing and Bill Wise at BAP for parts and installation!

    Proud Member of the Mid-Atlantic Cobra Association Member #15

  14. #14
    Flying For A Living dkscobra2003's Avatar
    Join Date
    October 2002
    Location
    Savannah, GA
    Posts
    1,295

    Thanks Bill for working through my hectic flying schedule.

    Aluminum Driveshaft, Driveshaft loop, MGW Shifter, Adj. Motor mounts are all in. (Thanks Billy!)

    Mixxer, I had that installed with my kit early on. (BMR Adj.)

    The only thing left to do is, find a place that can do the upgraded Shelby Kicker system install and I am done, for awhile.

    I say that now. I keep thinking about this Whipple 2.9L kit from Evolution....Spring has brought on this MOD MADNESS!!
    Last edited by dkscobra2003; 03-24-2012 at 05:10 PM.

  15. #15
    I miss my torque sunburned's Avatar
    Join Date
    May 2005
    Location
    DC
    Posts
    12,846
    Darryl, talk to Jason, he should be able to toss in that system no problem. If he's got the time at least.

  16. #16
    KB INSIDE zporta's Avatar
    Premium Member
    Join Date
    October 2009
    Location
    Baltimore
    Posts
    5,308
    What are you looking to do in the trunk?

    Fresh designs in ellicott city does custom work

    Mid Atlantic Cobra Association
    @zporta
    http://www.revanracing.com/products/...gauge-pod.html

  17. #17
    Mid-Atlantic Cobra Assoc. thesnakecharmer's Avatar
    Join Date
    May 2004
    Location
    Near Crapitol Chaseway, Md.
    Posts
    1,740
    Love it D




    Bill's Automotive Performance Racing
    Billy Built...B.A.P. Enhanced

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •