Results 1 to 25 of 27
02-05-2013, 12:12 PM #1
True Forged billet jacking pad GB
True Forged billet Jacking Rail insert Group Buy!
This GB is for the 1st gen version of the inserts only.
These are a must have for any DIYer mustang enthusiast. They allow you to jack your car up from the factory jacking points without bending the hell out of the pinch welds. These sit on your floor jack and slip right over the pinch weld just like the stock jack. I personally keep two of these on hand as I often have my car being jacked up by 2 floor jacks at one time. Ive had customers purchase 4 of them to use on 2 posts lifts. These also make a great gift for a mustang buddy. Perfect for Christmas lol.
These retail for $65 shipped, each.
I have a large number of this gen 1 design left still. We revised them to fit the newer GT500s as well, and wont be making these larger ones any more. So I need to empty out the stock we have left.
During THIS GB, I will be selling these for $50 each, plus $5 shipping.
I can fit up to 6 of them in one small priority flat rate box so the $5 shipping fee can include 6 of them.
Add these to a purchase of our tanks in that GB and save $5 in shipping.
While supplies last! GB ends on April 15th at midnight PST
These DO fit:
*ALL 99-04 Mustangs
*05+ Mustang GT and V6 (yes, including 2013)
*Ford contour (svt with a riser)
These do NOT fit:
*2011-13 GT00 (too big for opening)
*Boss (only fits up front. Exhaust in the way in the rear)
*Shelby 350 (side skirts too tall)
*possibly 94-98 Mustang
****HOW TO PAY****
CA residents PM me first
Paypal: [email protected]
Be SURE to include the following:
1. Name, address and email if its different than what PP provides us.
2. Your phone number
3. What exactly you are ordering. Be specific!
4. Your svtp username
If you do not follow these simple directions, there will be a delay in your order.
If you do not use paypal or hate the mofos you can use a CC. visa/mc/disco/amex. Call me at 818-357-2531. If you do not reach me, leave a message.
You can also send a personal check or MO. PM me first.
Canadian customers must use Paypal . extra shipping charges depending on how many ordered.
02-05-2013, 12:42 PM #2
Nice product. I'm working on a review for it right now.Silver 04 Lightning (aka The Defiant) Build date: 04/19/04 Delivered: 5/15/04
Let's crank up the boost and see what shakes loose.
02-05-2013, 01:16 PM #3
- Join Date
- May 2010
- Augusta, GA
I missed the price. You said $65 retail....
02-05-2013, 03:15 PM #4
02-05-2013, 03:21 PM #5
make one for 12 and 13 gt500 please
02-05-2013, 03:31 PM #6
Nice product... I think that these will sell well!'12 Mustang GT 5.0L
-FRPP BOSS 302 I/M
-ZEX Wet Nitrous System
-Pypes Stepped L/T Headers
-Pypes 3" O/R X
-Custom 3" C/B
-Steeda Tri-Ax STS
-Axle-Exchange 1-Piece Aluminum D/S
-FRPP 3.55 Gears
-Tuned by Chris Jones @ BlowByRacing
02-05-2013, 03:33 PM #7
Will these work with ROUSH/RTR side Splitters!?
Is there trimming to do when using them with the above?
2014 Sterling Grey GT/CS "California Special"
Coupe w/6M & 3.31's - Navigation & Comfy pkg -
MODS: 19" Forgestar CF10 Gunmetal Gloss ^ StopTech 14" Brakes ^ Tokico D-Specs & 1.5" Springs ^ BMR PHB & LCAs w/brackets ^ Eibach Sway Bar
MGW Ltd Shifter ^ AirAid CAI ^ Accufab 84.5mm TB ^ Kooks Shorty's ^ MRT MaxFlow H-Pipe w/ Kooks AB no resonators ^ VMP X4 Tune - NEXT: WL Watts Link
02-05-2013, 03:51 PM #8
Re: True Forged billet jacking pad GB
Just sent paypal payment. Thanks
Sent from my SCH-R530U using Tapatalk 299 cobra-novi, megasquirt,long tubes/xpipe/flows, upr k-member w/coilovers, eibach pros out back, canton pan,wideband O2, meth inject 425rwhp-400rwtq breakin loose on the dyno, bigger injectors & new f/p & SRA coming! 90 7-up vert, performer rpm, longtubes/offroad h/flows, 5lug conversion on 99 cobras
02-05-2013, 04:12 PM #9
02-19-2013, 08:29 AM #10
Just ordered one after cussing out my lowered car this weekend.
02-19-2013, 10:19 AM #11
02-19-2013, 11:15 AM #12
Figure out if they work on the sn's ! Ill definitely take one if they do96 FOBRA, 4.10's, custom trak-lok, steeda tri-ax st, EGR delete, IMRC delete, EVAP delete, COP swap, Pacesetter L/T's,MMR fuel rails,C&L 90mm maf, custom RAI ,99-01 console, eibach pro kit springs, kenny brown L/C/A's, NGK TR-6's, O/R H pipe, magnaflow full muffler catback, Rear mounted battery, custom lightning intercooler tank for overflow tank, walbro 255 pump, glenns performance stainless tank straps
02-19-2013, 04:11 PM #13
Can anyone verify if these will work on 2011-2012 with Roush side splitters??? If so I'll probably get one
02-19-2013, 05:24 PM #14
02-19-2013, 10:35 PM #15
02-20-2013, 05:59 AM #16
I got the Roush side splitters AND the Boss Quad exhaust...............bummer cuz I want one of these!!!!!!!!!!!!!!!!!!!
Last edited by Ultrakla$$ic; 02-20-2013 at 06:00 AM.
02-20-2013, 08:36 AM #17
02-22-2013, 08:09 AM #18
Thanks Steve for being an innovator.
02-23-2013, 01:26 PM #19
your inbox is full
tried sending you a PM but your inbox is full
I'd like to get 2 of these for my toolbox
02-25-2013, 03:29 PM #20
I just ordered two! These will come in handy, for sure!
02-26-2013, 11:23 AM #21
definitely interested. Are these shipping now or waiting until April? Got the moolah in my PayPal account...
2011 GT 5.0L Auto
GT500 Mufflers | Lethal O/R H-Pipe | Boss Manifold | Accufab 84.5mm TB | Airaid Intake | Steeda Ultra Lite Springs | Koni Shocks/Struts w/ GT500 Strut Mounts | UPR Control Arms w/ Relocation Brackets | Stallion Suspension Adjustable PHB
Nitto NT555 Street Tires | Saleen Grille | Cal Spec Front Valance | MMD Hood Accent Package | Boss Style C-Stripes | Ford Edge Shift Knob | MMD Hood Struts | Ortiz Performance 91 Octane Tune
12.55 at 114mph, 2.04 60' on stock Pirellis
02-28-2013, 08:38 AM #22
Have you tested on a 94-98 Mustang? I can't believe that the pinch weld would be any different from a 99 Mustang.Jimmy Bost
American Iron Racing #16 Ford Mustang (Coyote) Cobra
1998 Cobra Coupe
02-28-2013, 09:56 AM #23
- Join Date
- September 2012
02-28-2013, 01:10 PM #24
Ordered two on Monday early afternoon...got a shipping notification within the hour...and look who arrived yesterday around noon time. CA to Chicago in two days. Wow! Now that is service!
02-28-2013, 10:40 PM #25
- Join Date
- January 2013
- Happy Valley
Re: True Forged billet jacking pad GB
wish they were a tad cheaper...
Sent from my SGH-T989 using Tapatalk 2