Page 1 of 3 123 LastLast
Results 1 to 25 of 72
  1. #1
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854

    For Sale: Lysholm 3.3L Twin Screw kit

    .
    **************SOLD SOLD SOLD SOLD SOLD SOLD. Leaving this up in case buyer needs to reference later.

    I am going turbo so the twin screw is off. I am currently NOT interested in any trades nor will I be parting this kit out. I want to keep it together.

    The kit is a Lysholm/Vortech 3.3L twin screw with a 5" intake. Here's everything I'm including. I will list manufacturer part #'s and retail prices with them, and my asking price is at the bottom.

    The blower has around 5k miles on it, only about 6 track passes and as many highway runs.

    Lysholm 3300 Supercharger Kit - ($4,695.95)
    Features the Lysholm 3300 twin-screw supercharger, capable of 800+HP at 25+PSI Boost. (I made 817 on 21lbs with heads/cams & E85)
    Part number: 3320020 This kit includes the 4.25" upper pulley, Lysholm fuel rails and the Vortech throttle body


    5" Inlet Ducting Assembly for 2003-2004 Cobra Twin-Screw Superchargers - ($650.95)
    Part number: 4LFR212-040
    This intake kit includes the Five inch diameter mandrel-bent ducting with matte-black powder coated exterior. Includes provision for IAT sensor. Integrated IAC and crankcase breather ports. 123mm billet aluminum MAF housing (2005+ slot style MAF element and harness required) Air filter, and appropriate silicone sleeves with clamps


    I'll also include 3 additional uppers with the offer. They were each $95 from Vortech. If you're going to run the 4.25" upper, you will need a smaller snub idler pulley because the standard 90mm won't clear the upper. I have both a black anodized and a clear anodized 70mm snub idler pulley, I will include one of your choice. You can buy both for an extra $50 if you choose.

    SCT BA-5000 Slot Style MAF Meter
    SKU: BA-5000
    Manufacturer: SCT
    $229.95

    Lethal Performance MAF Adapter Harness
    SKU: LP-MAFHARNESS
    Manufacturer: Lethal Performance
    $69.95

    Grand total is $5,966 before shipping, my cost.

    I will sell you everything listed here for $4000 SHIPPED, $3800 picked up, FIRM!!!! Not going any lower
    3.3L Blower
    Elbow/Inlet
    Vortech Throttle Body
    Lysholm Fuel Rails
    5" intake setup
    BA5000 slot MAF
    MAF adapter
    4.25", 3.75", 3.5", 3.25" upper pullies
    1 black and 1 clear snub idler, you get both
    Gates Supercharger belt

    You will need to purchase a battery re-location kit as mine is still on the car. Taylor sells them

    Paypal Preferred. Will take a money order and it will ship after it's cashed/cleared.
    I'd prefer to ship to a business using motor freight so I can crate everything up and less chance of the package being jostled around. Motor Freight will also be slightly cheaper because of UPS's declared value cost scale. I will ship UPS though.


    NO SHIPPING TO CANADA/ALASKA/HAWAII

    HERE'S THE LINK TO THE PICS
    Lysholm 3.3L kit - Imgur



    .
    Last edited by Emwun Garand; 08-17-2013 at 10:23 PM. Reason: SOLD
    Parts by Lethal Performance Tousley Ford and Competition Speed and Sound
    Tuning by 04sleeper
    Porting work by Fox Lake
    Powdercoating by Crosslink of McKinney

  2. #2
    Crazy SVT Poster jwood222's Avatar
    Join Date
    October 2011
    Location
    NJ
    Posts
    174
    Ahh you should have told me about this last month I would have bought it!

  3. #3
    fast is never fast enough pickup_man06's Avatar
    Join Date
    September 2012
    Location
    columbia, MO
    Posts
    2,095
    Damn, that's a sweet ass deal. Almost everything you need!
    Old setup: kb gen 2 2.2L, 93 octane, 80's, still returnless, MAFia, accufab sbtb, 2.5" o/r xpipe and flo's; tuned by eric brooks @ brooks speed...600rr killer

    New setup: teksid 5.0, CNC ported 04 heads, TI retainers, comp stage 2's, kooks1-3/4x3", e85, and Whipple 4.0...rxt and 6 spd with irs and full bushing kit...numbers coming soon

    too much is never enough...

    Rides:
    2001 red on black vette zo6, h/c/I, 11.9x daily
    2004 mystichrome cobra, fully worked over, fun cruiser
    2011 Kawasaki zx10r, traction control, head work, cammed, full suspension. Track day whore

  4. #4
    CORNFED LYSHOLM svt4me38's Avatar
    Join Date
    August 2009
    Location
    Bealeton, Va
    Posts
    3,918
    Pmed you???

    03 COBRA OXFORD WHITE
    #4516
    MODS:
    Corn Fed LYSHOLM
    837 RWHP
    741 RWTQ
    Competition Speed and Sound
    Have you chased a Ford lately???

  5. #5
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    Trying to keep everything together for now. If I can't sell it as a kit, I might consider parting it out later on.

  6. #6
    u can go faster mod mod t56's Avatar
    Join Date
    September 2008
    Location
    ft worth
    Posts
    389
    Will this fit under stock hood and fit under strut tower brace

  7. #7
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    Quote Originally Posted by mod mod t56 View Post
    Will this fit under stock hood and fit under strut tower brace
    It will not fit under the hood if you have a UPR K-Member. It WILL fit with a Maximum Motorsports K member. I am not sure about a stock K member.

    No, it will not fit with a shock tower brace

  8. #8
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    Monday bump

  9. #9
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    Tuesday bump

  10. #10
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    hump day bump

  11. #11
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    thursday bump

    someone buy meeeeeeeeee

  12. #12
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    up up up

  13. #13
    Sup br0? aCidic's Avatar
    Join Date
    March 2012
    Location
    Fort Worth, Tx
    Posts
    41
    This is a freaking steal! Good luck Eric, if I was gonna do Heads/cam I'd probably pick this up instead of my 2.4 KB.

  14. #14
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    bump

  15. #15
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    bump

  16. #16
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    weekend bump

  17. #17
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    up

  18. #18
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    ttt

  19. #19
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    Price drop & free shipping to the lower 48

  20. #20
    Crazy SVT Poster ScreamMachine03's Avatar
    Join Date
    August 2011
    Location
    Stalker
    Posts
    177
    Stock motor? And fuel setup?

  21. #21
    SVT-Eric SVT-Eric's Avatar
    Join Date
    July 2010
    Location
    Denton Tx
    Posts
    715
    if it helps to sell this blower... THAT I WANT SO BAD!..

    ive seen this blower on his car and performed like a monster! ran really good and put down some nice numbers! eric takes care of his stuff so this is no junk! these are all top notch parts! if I had the money id bay it ASAP!

    this blower was on stock bottom end if I remember right.

  22. #22
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    Quote Originally Posted by ScreamMachine03 View Post
    Stock motor? And fuel setup?
    Stock rotating assembly, blower cams, head work. Made 817 on 21psi. I wanted 800 and got it so I didn't try any more boost. Fuel setup was triple walbro 255's return style, E85, 105lb injectors

    Quote Originally Posted by SVT-Eric View Post
    if it helps to sell this blower... THAT I WANT SO BAD!..

    ive seen this blower on his car and performed like a monster! ran really good and put down some nice numbers! eric takes care of his stuff so this is no junk! these are all top notch parts! if I had the money id bay it ASAP!

    this blower was on stock bottom end if I remember right.
    Thanks man!

  23. #23
    Premium Member Emwun Garand's Avatar
    Premium Member
    Join Date
    December 2010
    Location
    Grand Prairie, Texas
    Posts
    1,854
    bump

  24. #24
    Crazy SVT Poster
    Join Date
    March 2010
    Location
    Denver, CO
    Posts
    439
    Shit, I need to hurry up and buy a Terminator so I can pick this bad boy up. Free bump for ya, brother.

  25. #25
    Crazy SVT Poster jsonic's Avatar
    Join Date
    August 2012
    Location
    Michigan
    Posts
    351
    Damn! Great numbers and awesome price for a complete kit. To bad i spent my returns already lol
    2003 Sonic Blue Cobra
    #6862 04/24/2003

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •