Results 1 to 13 of 13
  1. #1
    Insane SVT Poster
    Join Date
    May 2010
    Location
    Virginia
    Posts
    1,419

    03/04 Cobra Seat To 96-98 Power Harness

    Here is a simple harness I soldered together to go from a 03/04 Cobra seat to the floor board plug of a 96-98 Cobra.





    Last edited by laddanator; 10-15-2013 at 06:33 PM.

  2. #2
    Richard Head Blown_By_You's Avatar
    Join Date
    September 2005
    Location
    Montana
    Posts
    6,670
    Beautiful. Now go get those seats lol
    95 Crystal White Cobra #702

  3. #3
    Insane SVT Poster
    Join Date
    May 2010
    Location
    Virginia
    Posts
    1,419
    Quote Originally Posted by Blown_By_You View Post
    Beautiful. Now go get those seats lol

    I hear ya! lol I got a deal in the works. Just trying to figure out how to attach the bottom rear seat 03/04 frame to the frame of the car. It would be so easy to transfer the rear upper back rest to my 96 Cobra rear seat frame but then I can't sell my stock seats with no frame.

  4. #4
    Crazy SVT Poster
    Join Date
    February 2011
    Location
    Tejas
    Posts
    950
    Quote Originally Posted by laddanator View Post
    I hear ya! lol I got a deal in the works. Just trying to figure out how to attach the bottom rear seat 03/04 frame to the frame of the car. It would be so easy to transfer the rear upper back rest to my 96 Cobra rear seat frame but then I can't sell my stock seats with no frame.
    I did

    If someone is wanting them they should have the frame already and are probably just looking to replace cloth for the leather. I offered to swap the seats for him too but he said he could figure it out.

  5. #5
    Insane SVT Poster
    Join Date
    May 2010
    Location
    Virginia
    Posts
    1,419
    Quote Originally Posted by redrocket16 View Post
    I did

    If someone is wanting them they should have the frame already and are probably just looking to replace cloth for the leather. I offered to swap the seats for him too but he said he could figure it out.
    Cool! I am going to switch the frame. When I was at the junk yard getting some parts I had a chance to look at some 03/04 seats. The passenger seat has the handle on the back never the bottom to fold the seat forward if someone needed more room or if you need more room to get something in the back seat but the driver seat doesn't have the latch or little handle in the back. How do you fold the driver seat forward?

  6. #6
    Thug life IronSnake's Avatar
    Join Date
    August 2006
    Location
    Carolina
    Posts
    964
    I just made a tiny two into one jumper wire for the power. Simple as that. Took me two minutes.

  7. #7
    Insane SVT Poster
    Join Date
    May 2010
    Location
    Virginia
    Posts
    1,419
    Quote Originally Posted by IronSnake View Post
    I just made a tiny two into one jumper wire for the power. Simple as that. Took me two minutes.
    I know it isn't that hard. Just thought I would try this since I was bored. Turned out well.

  8. #8
    Crazy SVT Poster
    Join Date
    February 2011
    Location
    Tejas
    Posts
    950
    Quote Originally Posted by laddanator View Post
    Cool! I am going to switch the frame. When I was at the junk yard getting some parts I had a chance to look at some 03/04 seats. The passenger seat has the handle on the back never the bottom to fold the seat forward if someone needed more room or if you need more room to get something in the back seat but the driver seat doesn't have the latch or little handle in the back. How do you fold the driver seat forward?
    As in the back seats folding down?

  9. #9
    Insane SVT Poster
    Join Date
    May 2010
    Location
    Virginia
    Posts
    1,419
    Quote Originally Posted by redrocket16 View Post
    As in the back seats folding down?
    No, the front seats fold forward. The passenger seat has the latch only for the 03/04 and my 96 seats have the latch handle on the back of both front seats. Must be a way to fold the driver seat forward?



  10. #10
    Crazy SVT Poster
    Join Date
    February 2011
    Location
    Tejas
    Posts
    950
    Quote Originally Posted by laddanator View Post
    No, the front seats fold forward. The passenger seat has the latch only for the 03/04 and my 96 seats have the latch handle on the back of both front seats. Must be a way to fold the driver seat forward?


    Doh, my bad.. I was talking about the rear seats and not the bottom front seats. Sorry I can't offer much help on that front

  11. #11
    Insane SVT Poster
    Join Date
    May 2010
    Location
    Virginia
    Posts
    1,419
    Quote Originally Posted by redrocket16 View Post
    Doh, my bad.. I was talking about the rear seats and not the bottom front seats. Sorry I can't offer much help on that front

    I thought you had the 03/04 Cobra seats?

  12. #12
    Crazy SVT Poster
    Join Date
    February 2011
    Location
    Tejas
    Posts
    950
    Quote Originally Posted by laddanator View Post
    I thought you had the 03/04 Cobra seats?
    I do, both front and rear. I used the 96 frame and the 04 seats in the rear and I used the 04 fronts with the 04 frames that came with them, both passenger and driver.

  13. #13
    Insane SVT Poster
    Join Date
    May 2010
    Location
    Virginia
    Posts
    1,419
    Quote Originally Posted by redrocket16 View Post
    I do, both front and rear. I used the 96 frame and the 04 seats in the rear and I used the 04 fronts with the 04 frames that came with them, both passenger and driver.
    That's what I mean. You have never seen the seat release latch on your driver seat?

    Passenger Side latch


    Driver Side latch seems missing


    See that weird looking spot on the driver seat where it looks like something is trying to come through. I know there is supposed to be a latch there. Not sure if it's broke off why a hole isn't there?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •