Putting 2001 cobra motor in a 1998 cobra???

[busa fed]

i am getting ready to drop a 2001 cobra engine a 1998 cobra and need help. i cant figure out how to run the fuel system. i have to use my 98 rails and injectors because the 98 uses a return style fuel system unlike the 2001. here is where my problem is. i can mount the stock 98 rails to the intake because the mounting tabs hit the intake and dont mount the same way. the 01 rails are meant to mounted horizontally into the side of the intake where the 98 rails are meant to be mounted vertically straight down. for right now, that is my biggest question i need help with. as far as the other things that need to be changed, i decided to stay with my 98 coil packs so i changed the valve covers for this. i also know i will have to extend the tps sensor wires and change the coolant crossover. let me know what you guys think

thanks,
Justin

[na svt]

Relocate/modify the mounting tabs on your old fuel rails to work on the new intake. You will also need throttle and cruise cables.

[1998SlowBra]

did it in mine, ran aftermarket fuel rails and regulator.