Reply
 
Thread Tools Display Modes
Old 11-04-2009, 02:49 PM   #1 (permalink)
Authorized Vendor
 
Stiegemeier's Avatar
 
Join Date: November 2004
Location: Missouri
Posts: 2,791
1.53 per day
Trader Rating: (6)
Extreme sale on our porting and services
03/04 COBRA PRICING
LIMITED TIME



SEND IN YOUR CASE ONLY SAVE $100.00:

Blower only stage 1 $295.00
Blower only stage 4 $495.00
Blower only stage 5 $595.00

Stage 1 blower tb and pl ported. $450.00
Stage 4 blower tb and pl ported. $695.00
Stage 5 blower tb and pl ported $795.00
(Prices above include pl ported/polished/welded and tb ported/polished for max gains.)
Stage 5+ blower and purchase of our Dragon tb and pl $1275.00
All Stage 5+ Includes TQ plate, welded and ported Accufab, Dragon tb and pl.

UPGRADES:
To upgrade the supercharger port, maintenance and port and weld OEM Tb and Pl $525.00.
Update blower only $275.00
Dragon tb ported/polished Pl ported/welded with purchase of Dragon $699.00 (if you do not have stage 5 must send in blower)
Throttle body and Plenum OEM (welded) $275.00 (12 rwhp)
Throttle body and Plenum OEM not welded $65.00 (2 rwhp)

BilletFlow pulley purchase and install $165.00 (All colors and sizes)
When sending in your pulley removal and install $45.00
Gaskets full set $74.50 or we sell individually.
Metco CAI $145.00 (We recommend a filter type non shrouded CAI)
Injector service $85.00 (at time of porting)

CUSTOM INTAKE MANIFOLD PORTING
Custom intake manifold porting $165.00 when sending in your blower.
Custom intake manifold porting $185.00 (when send it only)
Painting the blower $85.00
Painting the blower tb pl $145.00
EXTERIOR SHOW POLISHING
Stage 4 Porting with Exterior Show Polish $995.00 Blower only
Stage 5 Porting with Exterior Show Polish $1095.00 Blower only

Stage 4 Combo (blower tb and pl) ported with Exterior Show Polish $1195.00
Stage 5 Combo with Exterior Show Polish $1295.00
Update port and Exterior show polish blower only $795.00
Exterior Show Polish Only $695.00 (blower only)
Exterior Show Polish Only $895.00 (Combo)

Thank you and any other questions or concerns call and if you want to speak to Bob direct just ask.

636-949-2275

SNAKE BITEtm QUESTIONS CALL BOB WILL BE MORE THAN HAPPY TO SPEAK WITH YOU!

Thank you
Stiegemeier
Often Imitated Never Duplicated
StiegeSplash
636-949-2275 or
636-925-1656
*excludes Snake Bitetm
(remember we only suggest sending in case only if your supercharger does not need front drive rebuild and you are mechanically inclined.)
____________________________________
WE ARE THE LEADER IN PORTED EATON SUPERCHARGERS
AND REBUILDS!
EATON AUTHORIZED REMANUFACTURER
PORTING STARTING AT $295.00
3000+ PORTED SUPERCHARGERS TO DATE!
1-3 DAY TURNAROUND
WWW.STIEGEMEIER.COM
636-949-2275
GUARANTEED!

ONCE YOU ARE A STIEGEMEIER CUSTOMER YOU ARE ONE FOR LIFE.
OFTEN IMITATED NEVER DUPLICATED!
IF YOU HAVE ANY QUESTIONS ABOUT YOUR EATON WE HAVE THE ANSWERS!
CORES AVAILABLE


Ask about Stiegemeier SNAKE BITEtm
Last edited by Stiegemeier; 11-04-2009 at 07:07 PM.
Stiegemeier is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-04-2009, 06:53 PM   #2 (permalink)
Man Pedal User
 
Join Date: October 2007
Location: Texas
Posts: 1,467
1.92 per day
Trader Rating: (16)
Quote:
Originally Posted by Stiegemeier View Post
03/04 COBRA PRICING
LIMITED TIME

[b]

SEND IN YOUR CASE ONLY $100.00:
Im confused on this part.. if we send in the case only, are you taking off $100 from the work, or is the port work only going to cost $100? And is this offer good for the port updates?

Also, what is your rate to port and weld the dragon plenum, If I supply it to you?
____________________________________



If it has tits or wheels, it will cause you problems.
Last edited by Lstruck03; 11-04-2009 at 06:56 PM.
Lstruck03 is offline  
     Vehicle: 03 Cobra     HP: 450     TQ: 450     1/4 Mile: 11.76@ 118.57    
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-04-2009, 10:03 PM   #3 (permalink)
Authorized Vendor
 
Stiegemeier's Avatar
 
Join Date: November 2004
Location: Missouri
Posts: 2,791
1.53 per day
Trader Rating: (6)
Made Edit.
Say you want stage 4 complete unit $495.00
Send in case only $395.00

Say you want stage 4 blower,tb and pl $695.00
Send in blower (case only) tb an pl $595.00

So on and so forth on blower ports.
Does this explain?
Thank you
Stiegemeier
636-949-2275
StiegeSplash
Last edited by Stiegemeier; 11-04-2009 at 10:06 PM.
Stiegemeier is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-04-2009, 10:41 PM   #4 (permalink)
Man Pedal User
 
Join Date: October 2007
Location: Texas
Posts: 1,467
1.92 per day
Trader Rating: (16)
yes.. much better. thank you.

And what is your charge for porting and welding a dragon plenum, if I supply the plenum.
Last edited by Lstruck03; 11-04-2009 at 10:43 PM.
Lstruck03 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-05-2009, 01:52 AM   #5 (permalink)
Authorized Vendor
 
Stiegemeier's Avatar
 
Join Date: November 2004
Location: Missouri
Posts: 2,791
1.53 per day
Trader Rating: (6)
The Dragon tb and pl only? Ported and welded with purchase from us?
Thanks and sorry about the goof up in my original post (I better check the others)
Stiegemeier
636-949-2275
Blower porting starting at $195.00 and up.
StiegeSplash
Stiegemeier is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-06-2009, 12:24 PM   #6 (permalink)
Man Pedal User
 
Join Date: October 2007
Location: Texas
Posts: 1,467
1.92 per day
Trader Rating: (16)
Quote:
Originally Posted by Stiegemeier View Post
The Dragon tb and pl only? Ported and welded with purchase from us?
Thanks and sorry about the goof up in my original post (I better check the others)
Stiegemeier
636-949-2275
Blower porting starting at $195.00 and up.
StiegeSplash
Yes, the tb and plenum only, and without a purchase. I already have the dragon, I would be sending it to you. Just need to know the charge to port and weld it.

thanks.
Lstruck03 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-06-2009, 11:11 PM   #7 (permalink)
Authorized Vendor
 
Stiegemeier's Avatar
 
Join Date: November 2004
Location: Missouri
Posts: 2,791
1.53 per day
Trader Rating: (6)
Quote:
Originally Posted by Lstruck03 View Post
Yes, the tb and plenum only, and without a purchase. I already have the dragon, I would be sending it to you. Just need to know the charge to port and weld it.

thanks.

Stage 1 blower tb and pl ported. $450.00
Stage 4 blower tb and pl ported. $695.00
Stage 5 blower tb and pl ported $795.00
(Prices above include pl ported/polished/welded and tb ported/polished for max gains.)

Prices above are for the aftermarket Pl and Tb's also.
Thanks
PORTING STARTING AT $195.00 (CASE ONLY)
StiegeSplash
636-949-2275
Stiegemeier is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-09-2009, 08:26 PM   #8 (permalink)
Authorized Vendor
 
Linn@Amazon's Avatar
 
Join Date: November 2001
Location: Anderson SC
Posts: 4,756
1.62 per day
Trader Rating: (3)
are you doing any sale pricing for the Lightnings?
Linn@Amazon is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-10-2009, 04:45 PM   #9 (permalink)
Crazy SVT Poster
 
laruei's Avatar
 
Join Date: March 2008
Location: San Diego
Posts: 968
1.57 per day
Trader Rating: (7)
What would the gains and price of a ported lower manifold be when used in conjunction with my stage 5+?
laruei is offline  
     Vehicle: 03 Cobra     HP: 417     TQ: 386        
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-12-2009, 02:43 PM   #10 (permalink)
Torch
 
Join Date: March 2008
Location: Mount Prospect, IL
Posts: 670
1.08 per day
Trader Rating: (9)
Question about the Snakebite.

So, I send in my Eaton, with stock TB and Plenum.

So, the TB and Plenum will be ported, and the Eaton will be. So, with a 2.76 Upper, with the Snakebite, what kind of numbers would I be looking at?

I think I am going to save up for this, and get it in spring right after winter.

Also, do you guys do powdercoating, if so, how much?

Thanks!

-Chris
____________________________________


2003 TR 10th Anni. Cobra 462 RWHP 486 RWTQ SAE!!!
BF 2.76 W Idlers, K&N FIPK, Fluidyne Heat Exchanger, Rear Diff. Cooler, LDC Chicago HCM, Mac O/R Prochamber, Borla Stinger Cat-back, and plenty more mods.....
GrabberGT is offline  
     Vehicle: 2003 10th Anni. Cobra                
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-12-2009, 02:44 PM   #11 (permalink)
Crazy SVT Poster
 
laruei's Avatar
 
Join Date: March 2008
Location: San Diego
Posts: 968
1.57 per day
Trader Rating: (7)
You wouldnt want to run a 2.76 on a snake bite..
laruei is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-12-2009, 07:13 PM   #12 (permalink)
Torch
 
Join Date: March 2008
Location: Mount Prospect, IL
Posts: 670
1.08 per day
Trader Rating: (9)
Quote:
Originally Posted by laruei View Post
You wouldnt want to run a 2.76 on a snake bite..
Any reason why?

I'd be running it with a Gator Back belt, to help with any belt slip.
GrabberGT is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-12-2009, 07:34 PM   #13 (permalink)
Crazy SVT Poster
 
laruei's Avatar
 
Join Date: March 2008
Location: San Diego
Posts: 968
1.57 per day
Trader Rating: (7)
It may not be "common" knowledge but it is believed that steig replaced the gearset in the snout of the eaton to one with a higher ratio to spin the blower faster. Which is the same as running a smaller pulley yet with no belt slip. Thus you would not want to run a (internal) "2.76 pulley" with a actual 2.76 snout pulley.. that would be twice a normal 2.76..

does that make sense?
laruei is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-12-2009, 10:58 PM   #14 (permalink)
Torch
 
Join Date: March 2008
Location: Mount Prospect, IL
Posts: 670
1.08 per day
Trader Rating: (9)
Quote:
Originally Posted by laruei View Post
It may not be "common" knowledge but it is believed that steig replaced the gearset in the snout of the eaton to one with a higher ratio to spin the blower faster. Which is the same as running a smaller pulley yet with no belt slip. Thus you would not want to run a (internal) "2.76 pulley" with a actual 2.76 snout pulley.. that would be twice a normal 2.76..

does that make sense?
I understand.

So, I would want to run a lower. I gotcha.

Do you know if Billetflow makes good Lowers, or if Steggy does?

Thanks for the info.
GrabberGT is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-12-2009, 11:11 PM   #15 (permalink)
Crazy SVT Poster
 
laruei's Avatar
 
Join Date: March 2008
Location: San Diego
Posts: 968
1.57 per day
Trader Rating: (7)
i've never ran a lower but i believe billetflow doesnt make one neither does stieg..

LFP does and Metco.. not sure who else..
laruei is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-14-2009, 02:29 PM   #16 (permalink)
Authorized Vendor
 
Stiegemeier's Avatar
 
Join Date: November 2004
Location: Missouri
Posts: 2,791
1.53 per day
Trader Rating: (6)
The Snake Bite makes more boost, call for more information you would have to upgrade fuel mods to run smaller pulley's.
Thank you
Stiegemeier
StiegeSplash
636-949-2275
Stiegemeier is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-14-2009, 10:57 PM   #17 (permalink)
Rookie SVT Poster
 
charliex2's Avatar
 
Join Date: September 2009
Location: Louisiana
Posts: 94
1.16 per day
Trader Rating: (0)
If I sent my blower in to get ported stage 5, and got the dragon tb and pl what kind of fuel upgrade would I need to run the set up right?
charliex2 is offline  
     Vehicle: 2004 Cobra                
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 11-15-2009, 04:02 AM   #18 (permalink)
Authorized Vendor
 
Stiegemeier's Avatar
 
Join Date: November 2004
Location: Missouri
Posts: 2,791
1.53 per day
Trader Rating: (6)
Quote:
Originally Posted by charliex2 View Post
If I sent my blower in to get ported stage 5, and got the dragon tb and pl what kind of fuel upgrade would I need to run the set up right?
What pulley combination and goals are you wanting to achieve?
Stiegemeier
StiegeSplash
636-949-2275
Stiegemeier is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Bookmarks


« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On






All times are GMT -5. The time now is 10:31 PM.

Contact Us - SVTPerformance.com - Top
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.2
SVTPerformance.com is not affiliated with Ford Motor Company, and is not responsible for the content added by members.
This is a website for and by enthusiasts Copyright 2000-2008 SVTPerformance.com