07-02-2009, 03:41 PM
#1 (permalink )
SVT God
Join Date: April 2005
Location: MN/NJ
Posts: 1,532
0.92 per day
Black cobras, post your wheel setup
I am looking to put on some new wheels on my black cobra and I cant decide what looks good. Please post any pics you have as well as whay type of rims and size.
Thanks
____________________________________
2004 SVT Cobra Black (500 RWHP/480 TQ)
Stieg Stage IV Port | 2.76 BilletFlow Upper Pulley | NGK's | SCT XCal II | Magnaflow Cat Back | UPR Catted x-pipe | Afco Dual Pass Heat Exchanger | LFP Intercooler Reservoir | Motive 3.90 Gears with 8.8 bearing kit | Billetflow IRS Brace | 60lb injectors | Diablosport MAF.ia | K&N | BAP | 315 Nitto DR's
The List:
2008 MazdaSpeed3 (stock)
2007 Subaru STI (gay) - sold
2004 SVT Cobra (502/480)
1998 Jeep Sahara (Stock) - sold
1992 Dodge Stealth R/T (Stock) - sold
Vehicle: 04 Cobra
HP: 500
TQ: 480
07-02-2009, 03:45 PM
#2 (permalink )
Insane SVT Poster
Join Date: April 2004
Location: Cola, SC
Posts: 1,095
0.54 per day
18" chrome Saleen reps
CDC light bar is in!
____________________________________
479/421 Mustang Dyno
Eaton Swap, Saleens , M55 Catback with BBK O/R X, Eibach springs, MM FLSFC, MM HD Crssmember bar, 3.73's, Bruce's full IRS bushing kit
On the way:
New Engine???
Nitrous Oxide is like the Sexy, but skanky STD infected girl at the party, everbody want's to hit it, but are afraid of the outcome
Vehicle: 99 Cobra Vert
HP: 479
TQ: 421
1/4 Mile: 12.51@ 112.00
07-02-2009, 04:07 PM
#3 (permalink )
GO BIG OR GO HOME
Join Date: September 2007
Location: Pennsylvania
Posts: 447
0.57 per day
Ill have to get some pics posted up when I get home
____________________________________
2005 F-150 King Ranch
2004 Mystichrome Vert #688 (Stock)
2003 Cobra Coupe (Bolt-Ons)
Lund Racing Tuned
Bolt-ons
MD Racecars
Vehicle: 2003 Cobra
HP: 552
TQ: 539
1/4 Mile: 10.61@ 128.43
07-02-2009, 07:30 PM
#4 (permalink )
Whippled 04 Cobra
Join Date: September 2008
Location: LONG BEACH CA
Posts: 309
0.75 per day
____________________________________
Vehicle: 04 Cobra
HP: 614
TQ: 600
07-02-2009, 08:35 PM
#5 (permalink )
Now Whippled!
Join Date: February 2002
Location: Richmond, Va area
Posts: 275
0.10 per day
holy sh1t batman .. those TF wheels are pure sex!!
I've got 18" Saleen replica's also with 335/30/18 Nitto dr's on the rear.
____________________________________
Michael aka RoadRash -
2003 Cobra vert , Whipple Gen II - 643rwhp, 598tq, 21psi - Tuned by HBH
- 3" RR Ultra-grip - Spec 3+, 26 spline - Fore Triple Hat - Twin GT Pumps - Dual FPDM -8an hose to rail - Fuellabs filter - MGW Shifter - 63's - Accufab TB - SCT ba2400 - SCT XCal2 - Billetflow idlers - Billetflow IRS Brace - PHP Cold air kit - PHP heat exchanger w/dual fans - Bassani X & Catback - KB Xtreme matrix subs - Evenflow cooling - CDC Lightbar - LMM Airlift - MM CC Plates - MM rack bushings - Solid Diff Bushings - H&R Race Springs - Bilstein HD shocks - 3.73's old 462rwhp / 488rwtq (Eaton, 2.8 upper only)
1999 Cobra vert , #201 of 4055, full MM susp., 4pt Rollbar, MM IRS bushings, full Bassani, 4.10 gears, Ripper shifter, more (TOTALED 7/2008)
1996 GT 315/35/17's, 275/40/17, Cobra 'R' wheels, more (sold 8/2001)
Vehicle: 2003 Cobra vert
HP: 462
TQ: 488
07-02-2009, 08:37 PM
#6 (permalink )
Crazy SVT Poster
Join Date: April 2009
Location: Pensacola, FL
Posts: 327
1.64 per day
17" Stock fronts/17" AFS machined 10.5s out back.
____________________________________
Black 2003 Cobra: Bolt Ons...
2003 EVO 8: 342whp/364wtq, stock turbo- Sold.
www.weaponshield.com
Vehicle: 2003 Cobra
HP: 478
TQ: 491
07-02-2009, 08:40 PM
#7 (permalink )
Insane SVT Poster
Join Date: April 2008
Location: archdale NC
Posts: 1,180
2.09 per day
Show us what you have on the car now. I have chrome stocks on my black 04.
Vehicle: 04 cobra vert
HP: 455
TQ: 458
07-02-2009, 10:02 PM
#8 (permalink )
Crazy SVT Poster
Join Date: August 2008
Location: CALIFORNIA NEAR THE WATER.
Posts: 407
0.88 per day
Flat black replicas 17x9 front and 17x10.5 rear
____________________________________
07-02-2009, 10:41 PM
#9 (permalink )
Generic bad ass cobra
Join Date: May 2008
Location: Hell......I Wish!!!
Posts: 83
0.16 per day
MY new setup
Got these today sorry my camera battery died, (Phone Pics')
17x9/10.5
Nitto NT05 315/35/R17 (MEATS)
Can't wait to slap'em on
____________________________________
My cobra is slower than yours but at least its loud and
pretty
Vehicle: 2003 Cobra
07-03-2009, 03:15 AM
#10 (permalink )
Premium Member
Join Date: October 2005
Location: Calif, central coast
Posts: 1,640
1.10 per day
Anthracite FR500.... 18X9 front and 18X10 rear
____________________________________
Whippled '03 Cobra #4188
00R #155
If I could get back all the money I have spent on cars.... I would spend it all on cars.
07-03-2009, 04:55 AM
#11 (permalink )
Just a little 281ci motor
Join Date: April 2009
Location: Hawaii
Posts: 263
1.25 per day
I bought my car with Ford Racing Chrome 18x9's FR500's.
I also plan on getting some 18x9 18x11 CCW Classics in the near future.
____________________________________
2004 KB SVT COBRA :Kenne Bell 2.4
/ Full Support Mods
/ NX 75 Wet Shot
/ Tuned by Sam@Coastal.
07-03-2009, 09:53 AM
#12 (permalink )
RPB
Join Date: May 2006
Location: Worcester, Ma
Posts: 1,916
1.52 per day
____________________________________
2003 Black Terminator: Tri-ax shifter - Densecharger - Bassani catback - Bassani catted midpipe - 3.00 pulley - Ruff Racing 278s - Steeda Diff. brace - Steeda bumpsteer - Xcal 3 - Black wrinkle valve covers - Spec 3 clutch - Gathering what I need for "Mr. Whipple"
Vehicle: 2003 Cobra
HP: 445
TQ: 445
1/4 Mile: 11.85@ 117.15
07-03-2009, 09:58 AM
#13 (permalink )
SVT Poster
Join Date: September 2005
Location: Orlando
Posts: 1,605
1.06 per day
How about some Centerline Convo Pros?
____________________________________
New Eaton TVS 2.3 under the hood!
Tuned by Justin at VMP Tuning-10.45@134 w/1.57 60'
Powered by Lethal Performance
07-05-2009, 03:31 PM
#14 (permalink )
Crazy SVT Poster
Join Date: April 2007
Location: sebring
Posts: 314
0.34 per day
07-05-2009, 03:46 PM
#15 (permalink )
Rookie SVT Poster
Join Date: December 2008
Location: Thomasville
Posts: 69
0.22 per day
Black chrome 18"
07-05-2009, 03:47 PM
#16 (permalink )
Eaton Powered
Join Date: January 2003
Location: Indiana
Posts: 889
0.36 per day
errr.. my bad didn't notice this was in the terminator section.
Vehicle: 2001 SVT Cobra
HP: 485
TQ: 540
1/4 Mile: 11.02@ 124.89
07-06-2009, 08:43 AM
#17 (permalink )
GO BIG OR GO HOME
Join Date: September 2007
Location: Pennsylvania
Posts: 447
0.57 per day
07-06-2009, 09:12 AM
#18 (permalink )
SVT God
Join Date: April 2005
Location: MN/NJ
Posts: 1,532
0.92 per day
These all look good :-\ so hard to decide
07-06-2009, 12:53 PM
#19 (permalink )
Dark Side
Join Date: September 2006
Location: Tampa, FL
Posts: 823
0.71 per day
Quote:
Originally Posted by
Senkak
How about some Centerline Convo Pros?
HAHAHAHA.... Felipe looks so amazed at something running before your run LMAO
07-06-2009, 12:55 PM
#20 (permalink )
********Z06 H8R********
Join Date: May 2008
Location: CALIFORNIA
Posts: 5,187
9.40 per day
Quote:
Originally Posted by
EBCOBRA
____________________________________
MODS :STEGGY STAGE 4 PORT| POSI PORT ON TB & PL| 2.76 BILLETFLOW BLOWER PULLEY| ALL BILLETFLOW IDLERS| METCO 3.2 ALT PULLEY| #4 LFP LOWER PULLY| LFP SUPERTANK I/C RESIVOR| NGK TR6 PLUGS(GAPPED @ .032)| 3/4 CUT SPRINGS| HAWK BRAKE PADS| 10.5" BLACK 03 REPLICAS RIMS| NITTO 555'S ALL AROUND| 30% TINT| TAILLIGHT TINT| BLACK SHORTY ANTENNA|SOS DUAL A-PILLAR GAUGE POD| AUTOMETER LUNAR (SERIES 1) #30PSI BOOST GAUGE| AUTOMETER LUNAR A/F GAUGE| K&N INTAKE| SCT FLIP CHIP| DIABLOSPORT HANDHELD PROGRAMMER| DIABLO MAFia| KENNE BELL BAP| KENNE BELL BAP WIRING KIT| 2.5" ELECTRONIC CUT-OUTS| 2.5'' BASSANI CATBACK| 10 SERIES SINGLE CHAMBER FLOWMASTERS| 2.5'' CUSTOM H-PIPE| TUNED BY: GREG @ RACERS EDGE TUNING ON 91 OCT. & 20* TIMING
FOR SALE stock tb and pl for $60 shipped-D REAR TRACK TIRES & RIMS: 16X10 DIAMOND WHEELS POWDERCOATED BLACK WRAPPED W/ 28X11.5 16
WET KIT, AFCO H/E, 4.10 GEARS, SUBBFRAME CONNECTORS, IRS BRACE AND MM ROLLCAGE COMING NEXT
DYNO PULL VIDEO STOCK TB & PL :
http://s255.photobucket.com/albums/h...t=MOV02301.flv
Vehicle: 03 SVT COBRA
HP: 505
TQ: 530
07-06-2009, 01:03 PM
#21 (permalink )
Wreck 'em Tech!
Join Date: August 2005
Location: H-Town
Posts: 1,569
1.02 per day
Nothing new...see sig pic
17x9 and 17x10.5's with 315 BFG KD TA's
____________________________________
Black '04 Cobra Coupe : Born on 3.09.2004, #3155 of 3768, K&N CAI, MRT o/r H, Flows CB, 2.76 and idlers, ATS ported Eaton, TR6's, Houston Performance tune, MGW shifter, B/F IRS brace, Kenny Brown springs, Drilled and slotted rotors
CURRENTLY-Under the knife: Steggy Ported Whipple 2.3l, ported & polished plenum, SBTB, 60# injectors, twin GT pumps, SCT BA2800, JLT RAI, some gauges, Spec 3+, Steel FW, 26 spline input shaft, Fiore FWA & clutch quad, LDC freeplay kit, evenflow gen II head cooling mod, IRS bushing kit, Bumpsteer kit, MMFLSFC's
FS (soon) - K&N CAI, ATS ported Eaton w/ 2.76, Stock injectors, stock fuel pump, stock MAF, stock TB, A/F narrowband gauge (nib), Boost gauge (nib), new stock 03/04 clutch kit (including ford TOB).
Gone but not forgotten:
'99 Rio Red Cobra vert.
2846 out of 4055 born on 6.2.1999
Modded, geared and tuned by Scott @ MileHi.
Vehicle: '04 Cobra
HP: 479
TQ: 474
1/4 Mile: 11.83@ 121.00
07-06-2009, 01:43 PM
#22 (permalink )
Screwed By Twins
Join Date: April 2005
Location: CenCal
Posts: 2,403
1.45 per day
____________________________________
FOR SALE
Pics
2.3L Whipple|Metco 4lb|Accufab TB|Custom RAI
MAC Ceramic Longtubes|MAC Catted H
Wilwood 6-piston|CT-R 18x9, 18x10
Falken HT452 275/40/18|Azeni 315/30/18
UPR Tubular Kmember|Control Arms
MM Front Coilovers|MM C/C Plates
CenterforceDF|26 Spline Shaft
Fidanza alum Flywheel|Built IRS
Kenne Bell BAP|60lb Injectors
Fluidyne Radiator|UPR 160 Tstat
SVT #2527 of 8394
SCT tuned by RET
566rwhp/515rwtq
"All my life, I have searched for a car that feels a certain way. Powerful like a gorilla,
yet soft and yielding like a Nerf ball. Now, at last, I have found it." - Homer Simpson
Last edited by - Aj -; 07-06-2009 at 01:45 PM .
Vehicle: 03 Cobra
HP: 566
TQ: 515
07-06-2009, 02:26 PM
#23 (permalink )
Premium Member
Join Date: October 2005
Location: Calif, central coast
Posts: 1,640
1.10 per day
Quote:
Originally Posted by
- Aj -
Cool CTR wheels. Lookin good!
Where in Cent Cal are you located?
07-06-2009, 04:47 PM
#24 (permalink )
Crazy SVT Poster
Join Date: February 2008
Location: PA
Posts: 413
0.64 per day
If you have the chrome stockers just buy the 17x10.5 in chrome for the rear
____________________________________
2003 Zinc Yellow Cobra
Born 11/14/02
#3755 of 8394
1 of 490 Zinc Yellow Coupes
Stock Upper Pulley with Metco 6lb Lower Pulley, Metco Billet 90mm Idler, Flowmaster Cat Back Exhaust, K&N Air Intake, Chrome 17X10.5 Replicas with 315 BFGoodrich Drag Radials, MGW Shifter with F*ckin Fast Knob, Polished Terminator Coil Covers
Waiting to be installed: Stiegemeier Stage 4 Ported Blower, Plenum, Throttle Body with 2.93 pulley
FRPP M55 Catback
07-06-2009, 04:55 PM
#25 (permalink )
********Z06 H8R********
Join Date: May 2008
Location: CALIFORNIA
Posts: 5,187
9.40 per day
Quote:
Originally Posted by
Powershift03
Cool CTR wheels. Lookin good!
Where in Cent Cal are you located?
down here in paso robles with me brian....im telling you brian there are so many cobras in this little town
Thread Tools
Display Modes
Linear Mode
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off