Just seeing if anyone's interested. The car has just under 36K miles and is in great shape inside and out. There are no problems whatsoever besides the clutch which will be addressed before I sell it. It still has a stock clutch and it's not holding too well anymore, but I'll be installing the Centerforce DF this week with any luck. Wheels are CCW SP20s, 18x8.5 front and 18x11 rear (wheels sell for $2600 without tires). The pics shown here are with 345 BFG DRs on the rear, but I will be replacing them with 315/30 DRs so that they will tuck under the car and look better. The front tires are BFG g-force KDWs and they have less than 3K miles on them. The car will get a fresh service with Royal Purple 5-20 as well. Dyno numbers and an idle vid with the Crower stage 3s are in my sig. BEGGING FOR A TWINSCREW!! Asking $25K
EDIT: If you have any other questions about the mods or anything else, just PM or post here. Thanks.
____________________________________ SOLD #6536 of 8394--Built 4/9/03 Crower Stage III Blower Cams
Tuned by HPP Racing - Lewisville, TX
479/483 @ 13psi
Best ET (before cams):
11.897 @ 117.53
Best 60-foot: 1.696 on IRS and DRs
Last edited by DSG2003SVT; 04-23-2007 at 12:33 AM.
NGK TR6 plugs @ .030
Ray Hilton 16# boost gauge overlay
HPP tunes on SCT Xcal2
Mac 2. 5" Cat back
MRT 3.5" chrome rolled exhaust tips
O-R h-pipe
JLT Ram Air Intake
FRPP 3. 73s
Lightning Force Performance Heat Exchanger and IC reservoir
BilletFlow diff brace and brackets
Royal Purple 5W-20, RP Synchromax manual trans fluid, RP gear lube
clear corner headlights
black tinted tail lights (painted, not overlays)
shaved trunk badges
trunk painted gloss black between tail lights
Mustang World black rear bumper letters
AutoPage 860 alarm with remote start/kill and paging remote
MGW short throw orange shifter
Crower stage 3 blower cams + Crower HD springs and retainers
SCT BA2400 MAM
Metco X10 10 rib pullies with 6# & 10# lowers (3.1 upper and 6# lower currently installed and makes 13-14psi)
LDC cooling mod
HANS rear shock tower brace (trunk liner is removed, did not cut it)
BilletFlow black hood vents
MM FLSFCs
I think that's everything. If I remember something else, I'll post it. I also have tons of parts that I haven't installed yet that I will want to sell.
All NIB:
Ford GT pumps - SOLD
MM SF and diff bushings - SOLD
FRPP aluminum block - SOLD
Speedhut 200mph/23psi gauge overlay
+ a few more things
Last edited by DSG2003SVT; 04-25-2007 at 03:04 PM.
How soon are you looking to sell it? I am looking for a cobra right now and yours is beautiful. If your really motivated to sell it let me know. Im in california but would definatly make a trip out there if your really looking to sell.
How soon are you looking to sell it? I am looking for a cobra right now and yours is beautiful. If your really motivated to sell it let me know. Im in california but would definatly make a trip out there if your really looking to sell.
I'm ordering the clutch tomorrow and I should be able to get it in this weekend, at least that's what my plans are. I'm not even driving the car right now because I don't want anything to get worse than it is. After the clutch is in, I'll get the new tires put on and it will be ready. Within two weeks I should have it done and ready for a new home.
I'm ordering the clutch tomorrow and I should be able to get it in this weekend, at least that's what my plans are. I'm not even driving the car right now because I don't want anything to get worse than it is. After the clutch is in, I'll get the new tires put on and it will be ready. Within two weeks I should have it done and ready for a new home.
Im in houston and can come see it soon...not sure how far away you are from me though? Also you stated "I'm not even driving the car right now because I don't want anything to get worse than it is". Is that in reference to the clutch or some other problems your having?
____________________________________
Life moves pretty fast.....if you dont stop and look around once in awhile .....you could miss it.. FB
"I dont know..we uh, made browines.... I THINK IM DEAD!" ES
___________________________________________
2004 Mystichrome Coupe
Build # 489
Birth Date 1/6/04 http://videos.streetfire.net/video/1...5th_163964.htm
JLT CAI, Billet Flow 2.76upper, UPR 90mm Idler, Bassani SS X, Bassani SS Cat-Back, MGW (Orange), Billet flow f/w adjuster, Steeda dbl hook quad.,LDC freeplay mod,Spec stage 2+, FIdanza Alum. FW, Lethal TOB sleave,Afco pro H/E, Eibach Pro(going coil over or air bag soon)
Im in houston and can come see it soon...not sure how far away you are from me though? Also you stated "I'm not even driving the car right now because I don't want anything to get worse than it is". Is that in reference to the clutch or some other problems your having?
Just the clutch. There are no other problems with the car as I stated earlier. I'm going to go ahead and replace the front brake pads too. They're starting to squeal a good bit. The car will need absolutely NOTHING when it leaves my possession, I assure everyone of that. Fresh rear tires, fresh oil, new front brake pads, new and higher performance clutch. I'm not looking to put anyone in a bind by having to fix all these little things right after they buy it.
Unless someone wants to make me a fair AS IS offer. I would consider that as well.
It's going to cost me about $1100 to get the car ready to sell, so I think AS IS for $23,500 would do fine. If there's anyone interested in that, let me know. It would be much easier on me and then you could get whatever clutch, tires, oil, and brake pads that you want.
BTW, I'm not figuring labor into that cost as I do my own work. I'm not afraid to tackle a clutch when I've done a cams swap already, lol.
Last edited by DSG2003SVT; 04-24-2007 at 12:08 AM.
I'm getting quite a few trade + cash offers, let me tell you guys what I would make an exception for (you guys will get a kick out of this). I would trade for a car that should sell around $3000. I'm actually looking at old Acura Legends the most right now. I just want a beater that I can pay cash for and not have a car payment for a few months. If ya'll have something like that, small to average sized four passenger car, preferrably automatic, shoot me a PM and I'll see if I'd like to work something out with you.
Is there anyway i could call you because i have a few questions. Can you e-mail me a phone number trustkiller24@aol.com im very intersted in buying your car just need to know a couple things
Is there anyway i could call you because i have a few questions. Can you e-mail me a phone number trustkiller24@aol.com im very intersted in buying your car just need to know a couple things
Just ordered the DF clutch kit and a HD steel TOB retainer sleeve from LFP.
I already have a new TOB and pilot bearing. Should be coming together pretty soon!
man sick car... so is there a confirmed buyer? i wanna buy one by summertime seems like this ones gone in no time!
I already have a couple of buyers lined up to get it as soon as I'm all finished with the repairs and service. It's been a great car and I get compliments all the time on the way it sounds with the cams and about the wheels. Definitely a head turner.
Linear Mode
