Cams and intake, going under the knife.

[stanggirl14]

i guess you missed this todd. I'd really like to know when you get a chance, as i have about half of the stuff to do the swap now.

^^ +1

 

[NC Mystic]

i had been planning to do a cop for a few years now, given i took a hiatus from the forum but it's foreign to me as well. a good heads up but some elaboration or a link would be killer

 

[stanggirl14]

yeah, I've already collected the cam covers, COP conversion, COPS's etc
Haven't seen anyone who has bought RedMonster's harness having trouble but Todd knows his stuff so I'm curious now.

 

[encasedmetal]

^^^ What makes you say that?

370-380rwhp plus a 150 shot greatly exceeds the 450rwhp safety threshold of a stock bottom end.

 

[na svt]

with a c head swap and a 150 shot you'll blow your motor to hell.

Yup!

 

[NC Mystic]

Sold the Fox today, so it's time to make this happen!!!



-get the car operational, drain tank and replace all fluids

-put a new dash and door panels, rear package tray in the car

-flowmaster 10 series dumped, maybe get my nasty looking rusted long tubes powder coated if money allow. X pipe or keep the H? I want it to sound like jet black hate

-Get tires for the 18x9/10 saleens that have been on my floor for years. Legit center caps in all, rears are true saleens with front replicas.

-Custom Speed hut guages to my specs, will look just like 96 cluster but no kpm markers and will light up like the termi cluster at night, red SVT added to tach. I also would like a saleen clock pod with oil temp and oil pressure autometer lunar gauges and a speed of sound llc floating a pillar pod set with water temp and trans temp via lunar gauges.

-Aeroforce interceptor gauge

-MGW shifter? i remember hearing they were just the best. I liked the hurst in my fox but the throw was a little long and the lock in to gear could have felt more solid. open to suggestions here guys

-get the alpine flip out late 90's dvd player installed

-new weather stripping at the top of the windshield and upper and lower stripping on back window. i wonder if the 10% over list ford parts on the sticky section would have this?

the motor, i really want a finalized list as i'm going to start ordering part tomorrow so if i am not thinking of something let me know please

-Comp Cams 106400 cams with matching spring
-C heads ported
-B upper to C lower intake adaptor plate
-99/01 C lower intake with the blue dot or is a mach 1 lower better? would like to trade my eaton for one +cash if needed
-New Ford head studs?
-New Ford C head gaskets?
-any other gaskets or bolts needed? please help me out here so i don't forget stuff
-97 a/c condensor

what else am i forgetting?

can i use my stock B intake tube and throttle body or is it really worth getting an aftermarket piece?

and i can use a completely stock fuel system with the 106400 cams?

i recomendation on the degree of the 400 cams for the most aggressive idle would be appreciated.

thanks for the help all! :beer:

 

[na svt]

NC Mystic, send me an email, nasvt at yahoo

suggested parts:

shorter duration cams that can be installed at a lower intake lobe center

90mm MAF
stock TB
stock injectors
stock fuel pump
stock fuel rails
homemade intake tube

Head Gaskets/bolts...1996-04 Mustang 4.6L 4V Cobra Ford Racing Head Changing Kit, M-6067-T46 at LRS - Free Shipping!
valve cover gaskets...http://www.latemodelrestoration.com...-Mustang-46L-4V-Cobra-Timing-Cover-Gasket-Set
timing cover gaskets..http://www.latemodelrestoration.com...ng-46-4V-Valve-Cover-Gasket-Set-With-Grommets


hydraboostpulley……………http://www.summitracing.com/parts/MCH-640-08/
damper……………….........….http://www.summitracing.com/parts/MCH-1158-08/
water pump pulley..........http://www.summitracing.com/parts/MCH-1172/
4” alt pulley.....................http://www.summitracing.com/parts/MCH-116/
3.2” alt pulley…........……..http://www.speedconcepts.net/product_info.php?products_id=980

 

[NC Mystic]

the water pump pulley will work with my sean hyland pump i believe, anyone know?

 

[na svt]

what diameter is the damper?

 

[NC Mystic]

it's snowing here now, i will check tomorrow. it's been a few years since i put it in so i have no idea

can't remember which of the two pumps they offer i ended up going with