• Welcome to SVT Performance!

Cobra Jet Intake manifold CAI Set up interest??

Discussion in '2012-2013 Boss 302 Mustang' started by Bloodykisses, Apr 16, 2013.

  1. Bloodykisses

    Bloodykisses Mopar troll. Established Member

    Messages:
    251
    Joined:
    Apr 27, 2011
    Location:
    Ny
    So from begining dyno charts i have seen 30/30 gains across the board from the CJ intake swap on the boss 302. People are just starting to get them in their hands and trying to get them onto their cars. Would anyone be interested on a full 4 inch tubing cold air intake set up for this swap? Thinking about making one but i dont want to waste my time if no one has any interest.
     
  2. My BOSS

    My BOSS New Member Established Member

    Messages:
    33
    Joined:
    Jan 13, 2013
    Location:
    Missouri
    Haven't heard of this set-up yet, explain what it is. Thanks.
     
  3. Bloodykisses

    Bloodykisses Mopar troll. Established Member

    Messages:
    251
    Joined:
    Apr 27, 2011
    Location:
    Ny
    Well, in short. People are putting cobra jet drag manifolds on in place of the Boss 302 manifold. They have shown some serious increase in power and torque across the board. The few that have their manifolds already are having trouble getting a cold air intake system for it.
     
  4. My BOSS

    My BOSS New Member Established Member

    Messages:
    33
    Joined:
    Jan 13, 2013
    Location:
    Missouri
    Thanks, you learn something new everyday.
     
  5. 86Fbody

    86Fbody New Member Established Member

    Messages:
    1,470
    Joined:
    May 9, 2010
    Location:
    Crofton, MD
    Does the stock intake fit?
     
  6. Carbd86GT

    Carbd86GT You're Gator Bait Established Member

    Messages:
    5,747
    Joined:
    Feb 29, 2004
    Location:
    Jupiter, Florida
    No it does not, a custom cold air kit is required for the Cobra Jet manifold.
     
  7. davefzr

    davefzr New Member Established Member

    Messages:
    58
    Joined:
    Jun 11, 2005
    Location:
    Diamond Bar, ca
    I am definitely interested! Been monitoring AmericanMuscle's website for the last few months for an update, but nothing yet.
     
  8. Jenkins

    Jenkins New Member Established Member

    Messages:
    461
    Joined:
    Dec 10, 2012
    Location:
    Palatka Florida
    I'd like to see one on a Paxton car.
     
  9. thePill

    thePill Camaro5's Most Wanted Established Member

    Messages:
    1,299
    Joined:
    Feb 18, 2011
    Location:
    East of Pittsburgh, Johnstown PA
    I got tired of waiting for someone to make the CAI tube to fit the Cobra Jet Intake. The issue is, the Cobra Jet uses the GT500's throttle body. Because the GT500's TB is mounted in the rear of the supercharger, the CAI tube won't work. What is needed is a CAI tube that fits the dual 65mm TB or Mono-blade TB and the CAI tube, box and filter all rest in the Boss 302 intakes location.

    (Only have a GT) I got tired of waiting for a mere 40hp for nearly $3000 and ordered a Kenne Belle 2.8.
     
  10. Bloodykisses

    Bloodykisses Mopar troll. Established Member

    Messages:
    251
    Joined:
    Apr 27, 2011
    Location:
    Ny
    Its not difficult for me to make it. Its a pricey set up for sure. There are those guys though especially road racers that want that extra power (20-40/trq) without going to FI or camming the cars. Especially with what it shows for power and trq increase down low, it seems worth it. But, once you start getting into it manifold 800$, maf 700$, TB $550, then my intake which will be carbon fiber most likely, its a pricey swap for sure.
     
  11. Bloodykisses

    Bloodykisses Mopar troll. Established Member

    Messages:
    251
    Joined:
    Apr 27, 2011
    Location:
    Ny
    My idea was to sell the whole thing as a bolt in it. Or everything minus manifold. You just specify if you want a 123 or 140 maf.
     
  12. Rebel302

    Rebel302 New Member Established Member

    Messages:
    181
    Joined:
    Jun 5, 2012
    Location:
    In the 90s
    Bloodykisses - Count me in! keep me posted on this by pm if you wish
     
  13. HeLLFiRe xx

    HeLLFiRe xx Run your car, not mouth. Established Member

    Messages:
    725
    Joined:
    May 20, 2008
    Location:
    East Greenwich, RI
    Hmmm.... Intriguing.... I have the intake mani already and the tb... I have a 13 boss.... How would I verify ur skills before I allow u to begin.... I'm beyond a perfectionist... Text me and we'll chat... 401-486-6831
     
  14. HeLLFiRe xx

    HeLLFiRe xx Run your car, not mouth. Established Member

    Messages:
    725
    Joined:
    May 20, 2008
    Location:
    East Greenwich, RI
    Also... Where r u located?
     
  15. davefzr

    davefzr New Member Established Member

    Messages:
    58
    Joined:
    Jun 11, 2005
    Location:
    Diamond Bar, ca
    Did a little digging around the available PDF's and found that Ford will be releasing a CAI through Ford Racing to support the new intake manifold. Here are the details. Hope this isnt old information.

    Mustang GT applications require BOSS® 302 INTAKE MANIFOLD INSTALL KIT M-9444-M50B, not included.
    CR3Z-9G297-A Fuel Vapor Hose
    CR3Z-9G290-B Fuel Vapor Fuse Bracket and fasteners
    CR3Z-9J280-A Fuel Line
    Air Inlet Tube assembly – throttle body to air box. (inlet tube is not used)
    Other parts required for installation, not included:
    M-9926-C65 Throttle body
    M-9603-M50CJ Cold air intake (available 3rd quarter 2013)

    Open the following link and scroll to step 57 (last page) to see the final product.

    http://www.fordracingparts.com/download/instructionsheets/FordInstShtM-9424-M50CJ_.pdf
     
    Last edited: May 6, 2013
  16. sadil

    sadil New Member Established Member

    Messages:
    49
    Joined:
    Dec 7, 2012
    Location:
    Toronto, Ontario, Canada
    When it says "calibration is required", does that mean a tune? or is that something you have to have completed from Ford?
     
  17. davefzr

    davefzr New Member Established Member

    Messages:
    58
    Joined:
    Jun 11, 2005
    Location:
    Diamond Bar, ca
    Custom tune.
     
  18. Bloodykisses

    Bloodykisses Mopar troll. Established Member

    Messages:
    251
    Joined:
    Apr 27, 2011
    Location:
    Ny
    Intake is also recalled for another 2 months anyway.
     
  19. davefzr

    davefzr New Member Established Member

    Messages:
    58
    Joined:
    Jun 11, 2005
    Location:
    Diamond Bar, ca
  20. darreng505

    darreng505 New Member Established Member

    Messages:
    1,314
    Joined:
    Dec 28, 2012
    Location:
    Washington, DC
    Revisiting this old thread since the re-release of the CJ intake is near.

    How is the intake for it coming along? When is it available?
     

Share This Page