• Welcome to SVT Performance!
  1. True Forged billet Jacking Rail insert Group Buy!
    This GB is for the 1st gen version of the inserts only.


    These are a must have for any DIYer mustang enthusiast. They allow you to jack your car up from the factory jacking points without bending the hell out of the pinch welds. These sit on your floor jack and slip right over the pinch weld just like the stock jack. I personally keep two of these on hand as I often have my car being jacked up by 2 floor jacks at one time. Ive had customers purchase 4 of them to use on 2 posts lifts. These also make a great gift for a mustang buddy. Perfect for Christmas lol.

    These retail for $65 shipped, each.
    I have a large number of this gen 1 design left still. We revised them to fit the newer GT500s as well, and wont be making these larger ones any more. So I need to empty out the stock we have left.

    During THIS GB, I will be selling these for $50 each, plus $5 shipping.
    I can fit up to 6 of them in one small priority flat rate box so the $5 shipping fee can include 6 of them.

    Add these to a purchase of our tanks in that GB and save $5 in shipping.


    While supplies last! GB ends on April 15th at midnight PST

    These DO fit:
    *ALL 99-04 Mustangs
    *Fox mustangs
    *2007-2010 GT500
    *05+ Mustang GT and V6 (yes, including 2013)
    *Ford Flex
    *Ford Focus
    *Ford contour (svt with a riser)


    These do NOT fit:
    *2011-13 GT00 (too big for opening)
    *Boss (only fits up front. Exhaust in the way in the rear)
    *Shelby 350 (side skirts too tall)
    *possibly 94-98 Mustang


    ****HOW TO PAY****
    CA residents PM me first
    Paypal: [email protected]
    Be SURE to include the following:
    1. Name, address and email if its different than what PP provides us.
    2. Your phone number
    3. What exactly you are ordering. Be specific!
    4. Your svtp username

    If you do not follow these simple directions, there will be a delay in your order.


    If you do not use paypal or hate the mofos you can use a CC. visa/mc/disco/amex. Call me at 818-357-2531. If you do not reach me, leave a message.

    You can also send a personal check or MO. PM me first.

    Canadian customers must use Paypal . extra shipping charges depending on how many ordered.


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. SID297

    SID297 OWNER/ADMIN Staff Member Administrator

    Messages:
    41,094
    Joined:
    Mar 27, 2003
    Location:
    Myrtle Beach, SC
    Nice product. I'm working on a review for it right now.:beer:
     
  3. 11dsgGT

    11dsgGT New Member Established Member

    Messages:
    346
    Joined:
    May 5, 2010
    Location:
    Augusta, GA
    I missed the price. You said $65 retail....
     
  4. Djstorm100

    Djstorm100 New Member Established Member

    Messages:
    203
    Joined:
    Aug 5, 2007
    Location:
    Raleigh
    make one for 12 and 13 gt500 please
     
  5. REPCobra10

    REPCobra10 New Member Established Member

    Messages:
    3,132
    Joined:
    Aug 15, 2005
    Location:
    Tamarac, FL
    Nice product...:beer: I think that these will sell well!
     
  6. Nocturnal'14

    Nocturnal'14 G T / C S - #14-0933 Established Member

    Messages:
    1,645
    Joined:
    Jul 6, 2008
    Location:
    OH/KY/MO
    Will these work with ROUSH/RTR side Splitters!?
    Is there trimming to do when using them with the above?

    thanks!
     
  7. 99cobra907up

    99cobra907up New Member Established Member

    Messages:
    122
    Joined:
    Aug 20, 2010
    Location:
    Omaha
    Just sent paypal payment. Thanks

    Sent from my SCH-R530U using Tapatalk 2
     
  8. ah4449

    ah4449 Svt browser Established Member

    Messages:
    158
    Joined:
    Jul 22, 2007
    Location:
    Tracy, CA
    From my measurements they will not work with the roush side splitters. I remember measuring when they were on sale for cyber Monday.
     
  9. XPTB

    XPTB New Member Established Member

    Messages:
    212
    Joined:
    Oct 9, 2006
    Location:
    Memphis
    [​IMG]

    Just ordered one after cussing out my lowered car this weekend.
     
  10. SID297

    SID297 OWNER/ADMIN Staff Member Administrator

    Messages:
    41,094
    Joined:
    Mar 27, 2003
    Location:
    Myrtle Beach, SC
  11. THE RED 1

    THE RED 1 Wake up, piss excellence Established Member

    Messages:
    459
    Joined:
    Nov 20, 2012
    Location:
    New Jersey
    Figure out if they work on the sn's ! Ill definitely take one if they do
     
  12. 2012GTCS

    2012GTCS New Member Established Member

    Messages:
    1,041
    Joined:
    Jan 14, 2012
    Location:
    Long Island
    Can anyone verify if these will work on 2011-2012 with Roush side splitters??? If so I'll probably get one

    Thanks!
     
  13. AnthonyNoz

    AnthonyNoz New Member Established Member

    Messages:
    781
    Joined:
    Oct 5, 2011
    Location:
    Queens
    i have roush splitters and i was thinking about a dremel and trimming around the weld flat....
     
    Last edited: Feb 19, 2013
  14. 2012GTCS

    2012GTCS New Member Established Member

    Messages:
    1,041
    Joined:
    Jan 14, 2012
    Location:
    Long Island
    Just picked up the same one :banana: hope the lift is enough
    So you're saying it doesn't fit?


    Any insight from True Forged?!?!
     
    Last edited: Feb 19, 2013
  15. Ultrakla$$ic

    Ultrakla$$ic WhoFlungPoo Established Member

    Messages:
    1,870
    Joined:
    Aug 16, 2010
    Location:
    Louisiana
    I got the Roush side splitters AND the Boss Quad exhaust...............bummer cuz I want one of these!!!!!!!!!!!!!!!!!!!:cryying:
     
    Last edited: Feb 20, 2013
  16. AnthonyNoz

    AnthonyNoz New Member Established Member

    Messages:
    781
    Joined:
    Oct 5, 2011
    Location:
    Queens
    It doesn't fit Roush splitters. But it's the bottom of the car just trim/snip a bit of the splitter to where the weld is(theres already an opening here from Roush, just make it bigger) it cant be noticed unless u have the car lifted.
     
  17. Makdaddy

    Makdaddy New Member Established Member

    Messages:
    20
    Joined:
    Mar 1, 2012
    Location:
    Illinois
    Paypal sent

    Thanks Steve for being an innovator. :beer:
     
  18. RAP66

    RAP66 Member Established Member

    Messages:
    372
    Joined:
    Oct 18, 2002
    Location:
    SF Bay Area
    your inbox is full

    Steve

    tried sending you a PM but your inbox is full

    I'd like to get 2 of these for my toolbox

    Thanks

    Rich
     
  19. m109ner

    m109ner Member Established Member

    Messages:
    164
    Joined:
    Mar 13, 2011
    Location:
    Chicago
    Steve,

    I just ordered two! These will come in handy, for sure!

    Thanks
     

Share This Page