#1 permalink
10 sec street car
Join Date: October 2003
Location: MA
Posts: 8,735
**AutoEaton - 10.1s are MINE**
went up to the regular Wednesday rental today. All I really wanted to do was make a few passes to log the car now that Im running no heat exchanger. anyways, Ill post all the good info for you to see. start temp is before launch and end temp is peak rpm
____________________________________
Jake
Silver '03 Cobra Coupe Auto - First 9 Sec Eaton Only car!
6.31@108
9.94@135 w/ a 1.36 - NO Nitrous!
old setup
10.01@138 w/ a 1.49 spinning bad (100 shot)
**Click here for all my video's!!!**
Vehicle: '03 Cobra Coupe Auto
HP: 468
TQ: 470
1/4 Mile: 9.94@ 135.21
#2 permalink
I piss excellence
Join Date: October 2007
Location: South Carolina
Posts: 432
That's nothing short of insane... It's nuts you're so close to 9s with an engine that's built essentially as ford intended.
____________________________________
2003 Sonic Blue SVT Cobra - 452whp / 460rwtq
2005 Torch Red Mustang GT - FOR SALE
#3 permalink
Authorized Vendor
Join Date: November 2006
Location: kentucky
Posts: 11,361
Oh yeah baby keep knocking that record down. 106 mph in the eighth is honkin.
____________________________________
Whipple @ 22lbs - JLT RAI - SCT Big Air 2,400 - Accufab SBTB - 60lb inj's - Single Modified FPDM - Twin GT pumps - Afco dual pass H/E - H&R Race springs - Stock Iso's - ac427cobra's bushing kit - LMM Air Bags in rear - High Boost Overlay - MGW Shifter - Fiore adjuster - Kooks 1 5/8 Lt's - Kooks o/r x-pipe - Borla Catback - Head cooling mod - SCT X-Cal - Canton Expansion Tank - Level 5's - Bogart D10's - 28" Hoosier QTP's - True Forged IC resevoir - TF Victory Wheels - Posi ported lower intake - Autometer Phantom Boost & Fuel pressure gages... http://www.svtperformance.com/forums...rformance.html Home of the only 9 second no nitrous Eaton Terminator in the Country. Please click below for video and website.
www.posiperformance.com
Vehicle: 2004 Terminator
HP: 670
TQ: 670
1/4 Mile: 10.71@ 129.58
#4 permalink
SVT God
Join Date: May 2006
Location: St.Louis Area
Posts: 2,229
hell yeah dude!! thats crazy, i see some 10.OOOHHS coming! what ya think?
____________________________________
2003 COBRA- Tuned by BOB KURGAN
Just a little 6speedEaton
Boost Scoot n' Boogie Racing
Vehicle: 2003 Cobra
HP: 537
TQ: 534
1/4 Mile: 10.54@ 129.90
#5 permalink
Mid-Atlantic Cobra Assoc.
Join Date: November 2003
Location: Silver Spring, Md
Posts: 14,283
Wow Jake! That's a heckuva job! Awesome..........
Vehicle: 2003 Cobra
HP: 539
TQ: 526
1/4 Mile: 10.88@ 126.76
#6 permalink
SVT Junkie
Join Date: July 2005
Location: Ohio
Posts: 1,983
Damn that's quick.
#7 permalink
Crazy SVT Poster
Join Date: March 2007
Location: nc
Posts: 686
very nice. and to think some ts cars have trouble running tens. crazy 60ft.
____________________________________04 Cobra
#8 permalink
UNTAMED SLOBRA
Join Date: September 2007
Location: Harlingen ,tx
Posts: 305
Nice runs bro !!
____________________________________
UNTAMED SLOBRA
4.6 DOHC , SRA 3.73 UPR DBL ADJ UPPERS AND LOWERS , SPEC 3, 31 SPLINE AXLES AND FRRP UNIT CF CLUTCHES, JLT RAI, 2.76 BF PULLEY AND IDLERS , ACCUFAB SBTB AND PLENUM, MGW SHORTTHROW, KOOKS 1 3/4'S LT'S AND CUSTOM 2 1/2 X PIPE , MAGNAFLOW BULLETS AND THATS IT FOR NOW , ..
498 rwhp/536rwtq
545rwhp/576 rwtq w/50 dry shot
tuned bye :MIKE MURILLO !!!!!
THANKS MIKE !!!
Vehicle: 2003 SVT COBRA
HP: 498
TQ: 536
1/4 Mile: 11.52@ 114.56
#9 permalink
SVT God
Join Date: April 2005
Location: SoCal 805
Posts: 2,558
Damn that's moving. whats your suspension setup?
____________________________________
Black 10th Anniversary 2003 Cobra#1721 of 2003 BF 2.76 - BF 4pc Idlers - Pfab tank - Xcal II - Borla Stinger cat back 480rwhp/478trq SAE Previous Rides:
Formerly "NXSTANG"
Vehicle: 03 Cobra
#10 permalink
Mid-Atlantic Cobra Assoc.
Join Date: November 2003
Location: Silver Spring, Md
Posts: 14,283
THE PORTED CREW: BADASS03SVT..........10.19 @ 132.18 w/ 1.41 (Auto/SRA)
#11 permalink
Crazy SVT Poster
Join Date: April 2004
Location: Michigan
Posts: 850
Jake, congrats on another huge accomplishment!
____________________________________
10 Second Eaton Only Club
Vehicle: 2003 Cobra
HP: 471
TQ: 508
1/4 Mile: 10.59@ 126.74
#12 permalink
screamer
Join Date: November 2004
Location: The Triangle, NC
Posts: 1,238
congrats
____________________________________
FastLane Motorsports Built 03 2.2L KB Cobra
Vehicle: 2003 Cobra
HP: 600
TQ: 580
1/4 Mile: 10.70@ 130.80
#13 permalink
Crazy SVT Poster
Join Date: November 2007
Location: Columbus, Ohio
Posts: 269
That is flying. Congrats!
Vehicle: 03 Cobra
HP: 443
TQ: 444
1/4 Mile: 12.07@ 119.08
#14 permalink
SCREW THIS
Join Date: April 2005
Location: Bowie,MD
Posts: 2,460
congrats, thoses temps are nice
____________________________________
Coming Soon To A Track Near YouJLP 327 STROKER
K.B 2.8
9.54@144MPH
MODS=everything! M.A.C.A member for life fool!
#15 permalink
10 sec street car
Join Date: October 2003
Location: MA
Posts: 8,735
Quote:
Originally Posted by
iBiTe03
hell yeah dude!! thats crazy, i see some 10.OOOHHS coming! what ya think?
i think its going to get tough. good air will net me low 1's I think...like 10.10..maybe a high 10.0x. I have one thing I need to adjust on the susp. when I added that tank it put 50lbs out back and I think it messed up the geometry more than I thought which is why im down to 1.41s. before I was consistant 1.40s and that one 1.38 when the car broke.
#16 permalink
10 sec street car
Join Date: October 2003
Location: MA
Posts: 8,735
Quote:
Originally Posted by
Satyr
Damn that's quick.
LFP Radiator
JMS 170 Stat
Meziere elec water pump
old head cooling mod
everything else is stock.
#17 permalink
10 sec street car
Join Date: October 2003
Location: MA
Posts: 8,735
Quote:
Originally Posted by
SVT10TH#1721
Damn that's moving. whats your suspension setup?
14" 175# front coil overs on tokico drag struts
upr uppers/lowers w/ stock GT springs 3/4 coil cut, strange 10 ways
anti roll bar
#18 permalink
10 sec street car
Join Date: October 2003
Location: MA
Posts: 8,735
thanks all!!
#19 permalink
SVT Junkie
Join Date: July 2005
Location: Ohio
Posts: 1,983
Why take the HE out?
#20 permalink
No more SVT or DSM...
Join Date: June 2006
Location: NJ
Posts: 978
Amazing times with more left in it!
____________________________________
I sell Nissans!
Quote:
Originally Posted by
IronTerp
I'm a regular Crazy, but my memory is about as long as my pee-pee.....
'04 Torch Red Cobra Coupe: BF 2.76, JLT CAI, Bassani Catless X-Pipe, Borla Stingers & Mile Hi Tune---SOLD---RIP... '90 Sonic Blue Talon Tsi AWD Fully Built SCM61--- PARTED OUT
#21 permalink
10 sec street car
Join Date: October 2003
Location: MA
Posts: 8,735
Quote:
Originally Posted by
Satyr
Why take the HE out?
well since its turned into mainly a track car I think the HE will hurt IC temps. figure I have 6 gallons of ice cold water in the trunk. that flows to the blower, warms up a bit and comes right back to the ice water.
if I had a HE, that water would have to go through TWO places that would warm it up. my IC water temps were 40 degree's at the starting line yesterday. going through a heat exchanger flowing 70 degree air through it is only going to heat it up. the purpose of a heat exchanger is to remove heat by using the outside air temp.
#22 permalink
SVT God
Join Date: May 2006
Location: St.Louis Area
Posts: 2,229
EDIT: what he said LOL^^^
Last edited by iBiTe03; 09-03-2009 at 12:13 PM .
#23 permalink
10 sec street car
Join Date: October 2003
Location: MA
Posts: 8,735
couple diff spots for video. I was up alone again so no outside stuff
#24 permalink
Banned
Join Date: December 2007
Location: New Jersey
Posts: 1,439
Quote:
Originally Posted by
90goldtsiawd
Amazing times with more left in it!
y do u have svtburnout's avatar?
Congrats man on the sick times
Vehicle: 04 Cobra Coupe
1/4 Mile: 10.96@ 125.82
#25 permalink
Topless
Join Date: July 2007
Location: Hamilton, NJ
Posts: 252
Great work.
____________________________________
2003 Redfire Vert
Borla Catback w/ O/R Bassani X
Steggy Stage V, 2.8 upper & 4lb lower
Metco Idlers
UPR Catch Can
Custom Wicked Intake w/ BA2400 MAF
Accufab T/B and Plenum
60 lb inj w/ KB BAP
AFCO Dual Pass H/E
F/L Subframes
BF Diff Brace
Drilled and Slotted rotors
Spec 3+ Clutch, 26 Spline Input Shaft, Spec Aluminum Flywheel
Lunar Gauges
Line Lock
MSD Launch Master 2 step
Black FR-500 18/9 with Gforce Rubber
built and Tuned by KEVIN HAND of Wicked Motorsports
Vehicle: 2003 Cobra
HP: 500
TQ: 525
1/4 Mile: 12.72@ 116.50
Thread Tools
Display Modes
Linear Mode
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
Linear Mode
