Hey guys, I wanted to let you know that as of June 30th I will no longer be on the phones at Tousley.
I got a job offer that I couldn't pass up and I had to go for it.
Working with you guys has been great and I'll really miss talking to a lot of you and I've made some very good friends here.
This site has a tremendous community and it's been a real honor to be part of the site.
Some of you may have noticed that Mike R has been answering most of the PM's recently to take a bit of the load off me and he's a good guy and is picking up on things very well.
Tousley is staying on as a sponsor and I'm still going to be around here answering questions and providing you guys with quotes and invoice numbers so if you need something all you'll have to do is call in with the quote or invoice number and give the guy on the phone your billing info and the parts will be shipped.
I'm hoping to maintain the same high level of service that I worked so hard for with you guys as well.
So just to be clear, Starting July 1st I'll be here strictly on my own time and Mike is not going to be able to put as much time into this as I did so please be patient and we'll do our best to help everyone out.
I'll do everything I can to make things simple so if you get a quote number from myself or Mike PLEASE be sure to save it for when you call in.
The system might get some tweaks in the future but we'll have to see how things go and hopefully this can still work out in everyones best interest.
____________________________________
We are Tousley Ford parts depot selling all OEM Ford and Ford Racing parts 10% over dealer cost.
Damn. So many years I have been buying parts from you. Thanks for the great service all those years. You will be missed. Best of luck Steve with the new job.
Thanks for the excellent service Steve! You have been a tremendous help with my project! It has been a pleasure to do business with you! Take care and I hope things go well with the new job! Thanks!
Jared
____________________________________
2000 Mustang V-6 Project Machover
1995 White GT
1995 Black GT
1996 Orange GT
I took a position with Microcat, it's a company that produces parts catalog software for multiple manufacturers.
It's also the catalog system I've used for the last seven years so I know the program pretty well
I'll be doing mainly sales and some support type stuff as a sales rep for them.
I have come to an agreeement with my boss here so he'll pay me a percentage of anything that comes through under my counterman number after I leave.
So, on my own time I'll be in here answering parts requests and giving you guys quote numbers so all you'll have to do is call in with the quote number and finalize the order.
I'll try it out for a couple months and as long as it's profitable for me and we can keep you guys happy I'll do this as a part time job so we can all come out ahead.
Congrats on your new position we hope it's everything you deserve. Thanks for all the great service the last several years and you'll be sorely missed. I really appreciated all the help getting my car back on the road.
Thanks,
Tyler B
____________________________________ 2009 G8 GXP
370rwhp stock through paper air filter '03 Cobra - SOLD
Solid. Whipple.
614RWHP / 570 RWTQ
Best of luck with your new job Steve! You have provided the best customer service and experience I've ever seen and you are a WONDERFUL asset and friend to all of SVTP.
Thanks again for all of your help and don't be a stranger!
____________________________________ '03 Black 10th Anniversary - 2.8 pulley, JLT CAI, Accufab throttle body, UPR O/R X, Borla Stingers, MGW short throw, slotted rotors, 6k HID heads and fogs, black Canton surge tank, Steeda polished radiator cover, Hawk HPS pads, Legacy SVT boost and fuel gauges, MM coil overs, MM k-member, MM caster camber, MM bushings, MM upper control arms, MM tie rod ends, MM sub frames, MM irs bolts, MM steering shaft, Billetflow diff. brace, PHP toe link bars, DSS Level 5 half shafts, SCT tune by Bob Kurgan triple black '97 COBRA - SOLD 4-10-09 but never forgotten!
Last edited by leftysmoke; 07-01-2009 at 10:01 PM.
Posi Ported Eaton pushed this car into the 9's with no Nitrous! Current 1/4 mile Record Holder with a 9.94 @ 135mph and only Eaton in the 9's without Nitrous! Ever. http://www.svtperformance.com/forums...only-baby.html
Thank you for all your help over the past few years and all the great service and parts I bought from you. good luck with the new job!
____________________________________
2001 Mineral Gray Cobra #3534 of 3867 built 8/28/2001 (Tuesday built car!)No more windshield banner!
New setup: MMR 900 with Manley rods and Pistons 9.0:1 compression, BBK ceramic long tubes, off road h pipe, magnaflow catback, FRPP 3.73's, MMFLSFC's, eibach pro kit, 18 inch chrome fr500's with Nitto's up front and BFG's out back, T-56 w/ 26 spline input shaft, Spec 3+ clutch, 03 cobra aluminum flywheel, Procharger D-1SC @ 18 lbs, 3 core intercooler, 04 Cobra tank, twin GT pumps with KB BAP, 60# injectors, PMAS MAF, SCT XCAL 2, Billetflow IRS brace, autometer NV gauges, and much more
Tuned by Kevin @ Wicked Motorsports
Proud member (#208) of the Mid Atlantic Cobra Association
I was surprised when they told me on the phone you were no longer there. I was also surprised that Mike S also provided the stand up service I come to know with Steve. He took my order today and it was seamless. Usually when someone leaves, you know what can happen. Not here. Thanks for all at Tousley for keeping up the customer service.
____________________________________
COBRA FOR SALE!
-Whipple 2.3L Gen II polished TB & plenum 618/541-KB BAP w/ Lethal upgrade -Pro Chamber OR-H, w/Borla Stinger
-Billetflow clear idlers (3-100 & 1-90) w/ new bracket-Metco 4 lb lower with Gates belt-SCT X Cal 2 w/2400MAF. K&N FIPK
-Gords HE-MGW orange handle-H&R race springs; MM Full length SFC's; level 2 halfshafts
-All bushings upgraded except control arms-Steeda; CC plates, shock braces, bump-steer
-Billetflow IRS braces and bracket, QA-1 adjustables -SVE black 10th anniv. 18x9, 18x10 w/BFG KDW 335s
I'm glad to hear Mike took care of you, he's a good guy.
I'll be on here as a part time job helping you guys out so I posted the details of ordering below, I'll be getting paid a percentage of everything that comes though on quotes from me so if I respond to your post or PM with a quote number please use it.
If you need parts and you're pretty sure you want them just send me a PM with your request and please include your full name, phone number and shipping info so I can put a quote in the system.
Once you receive a quote number all you have to do is call in to Tousley and just tell whoever answers that you need to order the parts on the given quote number.
He'll take your credit card info and finalize the invoice and ship the parts. Whatever we can do to keep it simple for them will make everyone happier.
Hopefully this can work out well for everyone.
I'm not 100% setup at home yet (as of July 2nd) but it shouldn't be long and I'll be up to speed.
Thanks for everything Steve. When my local guys told me the parts didn't exist, you knew exactly what I needed and got it to me quick. Plus, you undrstand that the car isn't stock! I made sure to only talk to you when I called in, so you can be sure that I will only get parts through your order #. Good luck with the new job.
____________________________________
99 Cobra, Black, H/C/I, exhaust, T-56, 4.30s, lots of suspension
322 ci of aluminum mod motor on the way
Steve, this is Miguel from Miami. Just wanted to say thank you for your help in the last few months. I appreciate everything you did for me and wish you the best at your new job.
Linear Mode
