wtb hot side for single turbo

[xblownx]

looking for headers, or complete hot side for a t 76, please call me asap, I have cash, 352 494 6913

thanks Jimmy

[76mmsaleen]

mmr sells the hot side for 1399 ...
Kit Includes all parts shown in Picture below, great for DIY Turbo kits. The MMR kit features High Quality Laser cut header flanges, TIG welded construction, V-band clamps, High Quality expansion joint, 02' sensor provisions, T-4 Flange, Wastgate Provosion and Jet Hot Ceramic Coating.

Requires K-Member for all Applications

Works with all T-4 Turbos (Turbo not included)

Allow 2-4 weeks for delivery

[76mmsaleen]

or you could get the whole thing for 1800..

On 3 Performance Mustang Cobra 96-01 Single Turbo Kit:eBay Motors (item 140356244842 end time Nov-06-09 08:03:18 PST)

[xblownx]

thanks!

[Yaadman_GT]

I've got a Hellion Single Complete Downpipe setup only from the turbo to your catback....Black High Temp coat, Upper part of DP is Header Wrapped...Wideband/O2 bung and EGT bung installed. LMK

[milenko1247]

check my thread right below yours

Hey guys, Im thinkin about goin t/s instead of turbo.. Just seein if anyone is interested in my turbo parts before I full decide to go t/s.. I have all of the single turbo hot side pipes, hellion intercooler for like 1500 and I have a big red procharger bov and 38mm wastegate that i would let go for around 500. I also have a t76 turbonetics turbo that has a broken shaft that is a ball bearing center... I would through this in for a 100 more with the hot side parts. Let me know what u guys think and I am in gainesville fl

[slickv8]

check my thread right below yours

Hey guys, Im thinkin about goin t/s instead of turbo.. Just seein if anyone is interested in my turbo parts before I full decide to go t/s.. I have all of the single turbo hot side pipes, hellion intercooler for like 1500 and I have a big red procharger bov and 38mm wastegate that i would let go for around 500. I also have a t76 turbonetics turbo that has a broken shaft that is a ball bearing center... I would through this in for a 100 more with the hot side parts. Let me know what u guys think and I am in gainesville fl







Would the tubo kit you are selling fit a mach 1 and it only has the exaust up to where the catback, if you can please pst pictures very interested.

[dan03mach]

You can get a complete hot side from Ebay that is what I'm using and it works great. You will have to notch the fan shroud to fit the turbo but that isn't too big of a deal.

[Yaadman_GT]

Any word!?

[xblownx]

sorry about the delay, I am going with a custom set up, thanks alot for your info

[JML81]

Originally Posted by dan03mach

You can get a complete hot side from Ebay that is what I'm using and it works great. You will have to notch the fan shroud to fit the turbo but that isn't too big of a deal.

you usin that 200 dollar stainless hot side deal ???