• Welcome to SVTPerformance!

Project Deceptive GT: The Reboot

Discussion in 'SN-95 and New Edge Mustangs' started by Deceptive, Nov 15, 2017.

  1. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
    It has been a while since I updated my original build thread and so much has changed since this all kind of kicked off. I figured it was best to just start a new thread as this build will not change from what it is going to be now.



    Here is my 02 GT the day I bought it, 22.5k miles on it and stock except for a catback and neons.
    26149242909_470cd608f8_z.jpg


    Here is after my first round of mods. Eibach Pro System Plus, 18" Bullitt Wheels, MAC CAI, Simco Gauges, stereo upgrade, Pro 5.0 shifter
    26149242269_7723a34f52_z.jpg
    26149241009_fb01051ddf_z.jpg


    This is after a few more changes, Steeda 18' Ultralites, tint, Mach 1 Lip and Grille Delete and for the most part, where the car ended up (minus spoiler delete) before the rebuild began.
    26149239929_45ff65fc10_z.jpg
    37871871116_19878bc29e_z.jpg
    37871870226_d9b34dd25a_z.jpg


    Some may remember that I was doing a Saleen Clone, I sold all the Saleen stuff as I changed my mind. I wish I never went down that road. With the exception of hood, Mach 1 Lip, and Grille Delete the car will be stock body.


    The car is getting a Tork Tech Kit, TVS, T56, new suspension setup, full exhaust, new stereo, and some other things.


    Engine:
    Teksid Block
    03-04 Crank
    Manley/SVT Rods
    Diamond Pistons
    TFS 44cc heads
    NASVT cams
    TVS 2.3
    Mac LTs
    Catted X for emissions
    Prochamber
    Borla Stinger Catback
    Glenn’s Performance Tank
    03-04 Cobra Hat with twin Black306 340lph pumps


    Drivetrain:
    McLeod Aluminum Flywheel
    McLeod RXT
    MGW Shifter
    T56


    Suspension & Brakes:
    Steeda K Member
    Koni Yellow Shocks & Struts
    Stifflers K Brace
    Cobra F&R Brake Setup
    H&R SS Springs
    BMR Torque Box Brace


    Interior:
    Corbeau GTS II seats
    Pioneer HU
    Morel Tempo Ultra Components
    Diamond Audio D310 subs
    Diamond Audio D600.4 & 1000.1 amps
    Simco Gauges
    03-04 Cobra Shift Knob
    Bullitt Pedals


    Exterior:
    Haartz Stayfast Canvas Top
    Spoiler Delete
    Mach 1 Lip & Grille Delete
    Raxiom Smoked Taillights w/Sequential Signals
     
    Last edited: Mar 15, 2019
  2. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
    So, some progress I have made over the time I have had to do some work is the removal of the stock sound deadening material and replacement of new stuff. I used Boom Mat and Noico Liner. When I removed the old stuff I wire wheeled the metal, primered, and repainted the metal to make a good surface.

    37871866456_daf3a172d0_z.jpg
    37871866246_6482542db9_z.jpg
    26149230829_543b1b10ed_z.jpg
    37871866196_2f1c4317d6_z.jpg
    37871866166_eb9430d545_z.jpg
    26149230449_0591f75177_z.jpg


    I mounted the crossovers for the Morels after I had put Noico Liner on the doors. I also ran all new wiring through the car for the stereo and ditched the factory stereo wiring throughout.
    37871866066_7fa88dd765_z.jpg
     
    TERMN8U likes this.
  3. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
    Initially the plan was a built engine with a Vortech setup and then I was working on on a 03-04 swap.
     
    Last edited: Mar 15, 2019
    black4vcobra likes this.
  4. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
    Lots of changes have happened since I parked this car for a few upgrades. This thing really snowballed.
     
    Last edited: Mar 15, 2019
  5. GNBRETT

    GNBRETT Well-Known Member Established Member

    Messages:
    1,951
    Joined:
    Oct 14, 2010
    Location:
    Middle Earth
    awesome. what are ur power expectations?
     
  6. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
    I know that pretty much every Gen 2 TVS on stock bottom end is making right around 600hp & 550 lb/ft @20lbs. I'm going to try the 15lb pulley out of the gate and drop to the 13lb pulley if it is too close to the edge on 93.

    My setup should be 9.73:1 with worked heads, cams, full exhaust. I'd imagine near 600 &550.


    Sent from my iPhone using the svtperformance.com mobile app
     
  7. GNBRETT

    GNBRETT Well-Known Member Established Member

    Messages:
    1,951
    Joined:
    Oct 14, 2010
    Location:
    Middle Earth
    awesome. sounds like a beast!
     
  8. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
    I know it will make enough power for me to be happy with it for what I want the car to be. I am throwing the Vortech setup I was going to use in this car in my 01 Cobra but most likely ditch the V1 Si in favor of a V7 JT-B.


    Sent from my iPhone using the svtperformance.com mobile app
     
  9. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
    Well, I may have ordered a thing today. I cannot wait for it to arrive.


    Sent from my iPhone using svtperformance.com
     
    Zemedici, Smooth and OETKB like this.
  10. Smooth

    Smooth Well Seasoned Established Member

    Messages:
    10,278
    Joined:
    Jul 21, 2009
    Location:
    Wisconsin
    Does it rhyme with TVS?
     
    Deceptive likes this.
  11. Zemedici

    Zemedici Well-Known Member Established Member

    Messages:
    19,565
    Joined:
    Jan 7, 2013
    Location:
    Atlanta, GA
    :)
     
  12. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
    It rhymes with CVS with She-tee fie hunnit throatel booty.


    Sent from my iPhone using Tapatalk
     
    Zemedici, Smooth and TK1299 like this.
  13. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
  14. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
    black4vcobra and Smooth like this.
  15. Hunter98SVT

    Hunter98SVT Maximum Over Rustle Established Member

    Messages:
    573
    Joined:
    Mar 1, 2018
    Location:
    NW Iowa
    This this is going to be badass!

    Great work!
     
  16. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
    I hope, I ended up with a 3.1” upper (15-16lbs) and will do a 2lb lower on E85.

    Should put me in the 650-700rwhp range with the built engine.


    Sent from my iPhone using Tapatalk
     
    Hunter98SVT likes this.
  17. Weather Man

    Weather Man Persistance Is A Bitch Premium Member Established Member

    Messages:
    13,463
    Joined:
    May 18, 2012
    Location:
    MN
    Nice!
     
    LaserRed_Snake likes this.
  18. Deceptive

    Deceptive Would Smash Premium Member Established Member

    Messages:
    7,585
    Joined:
    Feb 10, 2011
    Location:
    Nashville, TN
    Well, decided to end up keeping this simple and made a few changes again.

    Decided to have a little fun, do something a little different, and simplify.

    Bought a Tork Tech Kit, TFS 44cc Heads, and Diamond Pistons. Selling my Terminator Swap stuff.

    Anyway, this showed up yesterday.
    IMG_2402.JPG
    IMG_2403.JPG

    NASVT Spec’d cams and PAC Valvesprings


    Klaus Is Googling my new sig using the svtperformance.com mobile app
     
    8ballBooker likes this.
  19. 90lx

    90lx Member Established Member

    Messages:
    34
    Joined:
    Feb 2, 2017
    Location:
    TN
    Your car is going to be a beast! Are you by chance doing anything with your stock parts? I picked up a 00 GT a few weeks ago and trying to make it road worthy again. I have a buddy in Smyrna and I try to visit when possible, so I'm that way ever so often. I'm about 2.5 hours west of Nashville.
     
  20. Revvv

    Revvv Infinity Poster Established Member

    Messages:
    10,186
    Joined:
    Dec 8, 2017
    Location:
    GA
    What parts are you looking for?

    Sent from my [toilet] using the svtperformance.com mobile app
     

Share This Page