Search results

Have a set of 4.6 B Heads for sale. Heads are in great shape, cam bores look brand new. Drivers side head has evenflow head cooling fitting installed. 300+ actual shipping. I get really good discounts on shipping so it should be under $100 to ship anywhere in the US.

Have a set of 96-98 Cobra Cams for sale. Cam lobes have normal wear and no grooves/gouges in them. They are also all marked. 250 shipped

I have a set of 03 04 Cobra Valve Covers that are powdercoated flat black. Coating is in really good shape except for the one picture below. 375 shipped

I have a bunch of stuff off the motor I removed from my car for sale. Forged Kellogg Crank - 800 shipped - Crank is in perfect shape with no issues that I could see Teksid Block - 500 picked up - Never been bored, mains and bores literally look brand new with excellent cross hatching still...

Looking for the coolant tube that connects the water pump to the heater core. Part # is F8ZE-18663-BB. Looks like this, I only need the hard pipe section. Sent from my Pixel 7 using Tapatalk

Got a 96-98 Cobra intake manifold for sale. Comes with an accufab throttle body, brand new upper to lower gasket, and all the bolts for the upper/lower. Underside of the intake behind the throttle body is tapped for a meth/nitrous nozzle, can be plugged with an 1/8 npt plug if its not needed...

Got a Go Fast Bits FX-D Fuel Pressure Regulator for sale. Part #8070 Comes with the 2 -8AN fittings and -6AN return fitting and mounting bracket. These regulators are unique because the diaphragm they use holds pressure like a stock regulator after shutdown unlike most stuff on the market...

Set of MMR IMRC Deletes for Sale for 96-98 Cobras. $150 shipped

Have a Vortech V1 T Trim CCW rotation for sale. Stepping up to a big boy JTB so I don't need this one anymore. The blower is in excellent shape, it was recently rebuilt in 2022 by jon bond and has about 800 miles on it since the rebuild. Rebuild alone was almost $800. These V1's are the best...

Used RAM 8 Bolt Billet Aluminum flywheel for sale. Has roughly 10k on it, insert is replaceable if necessary. I also had this professionality zero balanced by a local machine shop. You'd be amazed at how far out these "zero" balanced flywheels are from these manufacturers. Dowels in the...

Have a T45 out of my 96 Cobra that hanlon built. Has roughly 8-10k on it since the rebuild. Trans shifts amazing compared to a stock t45. The only issue with it which is really a design defect from the factory is it will stick in reverse every once in a while. Not a huge deal, just need the...

I have a used set of ProM 62LB EV1 style injectors for sale. They were ran for about 500 miles and I had to step up to a larger injector when I upgraded my blower. ProM has extremely accurate data for any ford based tuning setup like SCT or standalone to get them dialed in quick...

I have a brand new Quicktime RM-6081 Bellhousing for sale. Work with 4.6/5.0/5.4/5.8/6.2 Ford Modular and 7.3L Godzilla Engines with TKX, TKO, TR3550, or T5 Transmissions - SFI Certified 800 shipped, send paypal as a gift or add 3% [email protected]

I have a bunch of timing components all brand new that I'm getting rid of. Accufab - HD Secondary Chains - HD Secondary Tensioners - Billet Cam Spacers 4 ARP Cam Sprocket Bolts 2 Cloyes Adjustable Cam Gears OE Ford Primary Chain Set and Primary Tensioner Set OE Ford Cam Gears and...

I have a set of driver and passenger DC heads for sale. They are very clean and the journals are in perfect condition, no scoring or grooves. Since DC heads are side specific the drivers head is labeled so they don't get mixed up. I can throw in the cam gears, secondary chains, sprockets...

Looking for a 2001 cobra intake manifold, don't need rails, sensors, injectors, or anything else besides the upper and lower. Let me know if you have anything. Sent from my Pixel 7 using Tapatalk

Looking for a set of DB or DC heads, let me know what you got. Sent from my Pixel 7 using Tapatalk

I have a used Innovate DLG-1 setup for sale. Everything works fine and the only part not included that you would get with a brand new setup are the weld in bungs for the O2 sensor because they are welded in my exhaust. Also comes with a programming cable to connect to the DLG-1 and LC-2 if you...

I have an almost brand new set of ProM 62LB EV1 style fuel injectors. Only about 200 miles on them because I had to switch to a different set for my new standalone ECU setup. These are actually true 62LB Injectors because they are flow rated at 39.15psi vs 43.5 like most other injectors. 400...

Have a used Accufab Throttle Body with gasket for 96-98 Cobra, part CTB9698. Switching over to a c head manifold so can't use it anymore. 225 shipped Paypal [email protected]

Have a stock 96 Cobra LLX3 ECU and XCal2 for sale. I fogot to unmarry the XCal before i pulled everything so the tuner must go with the ECU. Works perfectly fine, just put in a standalone which is why i'm getting rid of it. XCal has tunes on it for a vortech blowthrough setup with 60lb SD...

Got a used Fuelab 51506 Fuel Pressure Regulator for sale. Works perfectly fine, had to change it out because i needed a different return setup when I did my fuel system. Comes with 2 -8 fittings and 1 -6 return fitting. $100 shipped Paypal [email protected]

I've got a used Snow VC-25 Meth Controller. It's almost like new since it lived its life in the glove box vs underhood like most people install them. Went to a standalone that has meth controls so I don't need this anymore. These are super hard to find and work awesome. Can run off boost or...

Got a set of 8 60LB Siemens Deka EV1 style injectors up for sale. Have around 10k total miles total and roughly 3k miles since they were inspected, cleaned, and flowed. 250 shipped Paypal is [email protected]

I have a Vortech 3.30 6 Rib Griptech Pulley for sale. Used for 1 summer and i'm turning up the boost with a smaller pulley and dont need it anymore. $135 shipped OBO Paypal is [email protected]