04 Cobra Finally!!

[canadianbullitt]

I have wanted a Terminator since they first came out. Finally it was time. After paying for the car I had it shipped 2200 miles from NJ to Alberta. Longest month ever!
A huge thanks goes out to Blueline aka Tony. He made the transaction as easy as it could be. Im sure he will chime in with his new ride.
Anyway I am beyond excited.
This car is unbelieveably clean and pulls like crazy.
will be getting the tune checked in the next couple of weeks.
Mods:
- Whipple 2.9 stock pulley
- 80 Ford Racing injectors.
- SCT BA3000 MAF
- JLT RAI
- Wrinkle Black Valve covers
- I/C PFAB Polished Aluminum IC tank
- Polished Radiator Coolant PFAB Tank
- AFCO Dual Pass Heat Exchanger with "SVT" in black
- -8an PTFE Stainless fuel line
- Aeromotive inline fuel filter
- Kurgan Triple pump fuel hat
- Twin GT Fuel pumps
- Dual FPDM harness with wire upgrade
- Ford Racing Differential cover
- Brand new 3.55 gears
- Rear Differential was just rebuilt with new carrier, bearings, seals etc...
- Maximum Motorsports Polyurethane bushings throughout the entire IRS
- Maximum Motorsports Full Length Sub Frame connectors
- Spec 3+ clutch
- 26 Spline input shaft
- Borla stinger exhaust (polished tailpipes)
- Bassani X pipe w/ removable cats
- Dual aeroforce gauge setup in the dash cluster
- BBS RK's Plasma wheels
- Brand new Mickey Thompson Drag radials
- Brand new Toyo RA1 front tires
- Fore hood vents
- Steeda triax shifter
- 5% tint and 50% tint on the front windshield
- Eibach Pro Kt lowering springs
- SCT handheld tuner
- Evenflow head cooling mod

I have a few other small things planned but nothing major for now.
With the altitude up here im hoping to still see a little above 600rwhp.
Here are some pics.

By canadianbullitt at 2012-06-04

By canadianbullitt at 2012-06-04

By canadianbullitt at 2012-06-04

By canadianbullitt at 2012-06-04

By canadianbullitt at 2012-06-04

By canadianbullitt at 2012-06-04

By canadianbullitt at 2012-06-04

By canadianbullitt at 2012-06-04

By canadianbullitt at 2012-06-04

By canadianbullitt at 2012-06-04

Im not a good photographer by any means. Hopefully get something professional done soon.
Cheers.
P.S I was told at the 3500ft elevation we have here I would probably only be seeing about 17PSi with the stock pulley. It was seeing 19 at sea level. Should I pulley down to make up for this or should I just leave it alone? I will be running 91 octane (possibly 94 but this may have up to 10% ethanol in it) and a can of Torco at all times.

 

[MICLO50]

beautiful find man! take care of her

 

[SVTCobra60]

Was going to buy this car a few months back! He's a good guy and that is a SICK car!

 

[03 TOPLESSSVT]

Congrats on a great purchase!

 

[bizzmeister]

Beautiful Cobra man, congrats.

 

[510Terminator]

Congrats man! Welcome to club...i like the decklid liner!

 

[canadianbullitt]

Thanks guys. Dream come true. I have wanted one of these since I first saw one in a 2002 edition of 5.0 Mustang magazine haha.

 

[paradigm]

Great looking, and nice wheels on it too

 

[T-Pain808]

Stoked :beer:

 

[blu88notch]

Congrats on the hotrod, VERY nice.
Were in AB are you?
Curious as AB is where my roots are.

 

[TerminatorSVT03]

Very nice cobra man good luck with ! Love your wheels! Wish I could find a set

 

[SLVRBLT]

Congrats!

You're pretty much set with all the mods/looks.

 

[CobraBob]

Great looking, and nice wheels on it too

I can see why you like the wheels. LOL! Yes, they're definitely good looking.

CandianBullitt, you did well. That is an awesome Terminator, and well modified. I think you'll be more than happy with it. Enjoy it this summer! :beer: :rockon:

 

[Ghoust]

very sexy. Enjoy!

 

[nd4spd-cobra]

Nie to see another nice Cobra up here.. Congrats

 

[OH3BLKSVT]

Sweet looking Terminator man, love the wheels! Black is the best! I too wanted one when they came out but was 15 years old haha! Bought mine @ 23 and 1 96 GT, 97 supercharged cobra, and stock 97 cobra later. well worth the wait!

 

[timspony]

I know most of the history of this Cobra (former NY car) .... Congrtas! :beer:

 

[canadianbullitt]

Congrats on the hotrod, VERY nice.
Were in AB are you?
Curious as AB is where my roots are.

Thanks man.
Im in Red Deer. Its right between Edmonton and Calgary.

 

[canadianbullitt]

Very nice cobra man good luck with ! Love your wheels! Wish I could find a set

Thanks. Yes ive heard they are hard to come by. Blueline spent alot of money getting them refinished. They are in wicked shape!
Only thing I would give them up for would maybe be a set of true forged victorys haha

 

[Blueline]

Hey Chris! Man the car looks great and those pics look great! Thanks again for making this such and easy and smooth transaction. It makes me feel better the car went to a great home where I know she will be kept in the same if not better condition. Enjoy the car and please continue to keep me in the loop. I also hope you send me some pics when your out cruising, Im sure you guys have some great views out there! Please stay in touch and enjoy her!!!

Thanks again :beer: