1988 Procharged Notchback

Jacobb0114

Member
Established Member
Joined
Mar 1, 2015
Messages
57
Location
UNITED STATES
Motor:

-Built by JBA

-Bored to a 306

-trw forged piston

-comp cam roller rockers

-crane 444131 cam

-crane push rods

-crane hydraulic roller lifters

-edelbrock performer heads

-Arp head bolts

-edelbrock performer intake

-70mm mass air flow out of an S-197

-70mm throttle body

-255lp fuel pump

-60lb injectors

-Msd ignition box

-12in flex-a-lite fan

-2 6" fans: 2400 cfm each

-Mishimoto 3-core radiator

-Procharger P1-SC with intercooler

-4" pulley currently on but I also have a 3.75" for it

-Currently running 9psi and make 450whp on a conservative tune

(Procharger installed and tune by GTR high performance in Rancho Cucamonga)


Motor was rebuilt a couple miles ago by "Burbank Speed and Machine" with all new cam bearings, main bearings, new freeze plugs, front and rear seals, cometic mls head gaskets, every gasket is new, valve job, crankshaft polished, new piston rings, ford racing high volume oil pump. Brand new AGR power steering pump. I have receipts for everything.


Drivetrain:

-One piece aluminum drive shaft

-3.27 gears

-Auburn rear differential


Exhaust:

-Shorty headers

-Catless h-pipe

-Borla XR-1 mufflers


Chassis:

-Subframe connectors

-Steeda springs

-Koni struts


Max Tow boost gauge, water temp, and wideband.

$15,000
8185318821
IMG_0032.JPG
IMG_0034.JPG
IMG_0036.JPG
IMG_0038.JPG
IMG_0040.JPG
IMG_0042.JPG
IMG_0178.JPG
 

Users who are viewing this thread



Top