if you have pulled all the other bolts already and left that one only tight, then it could be carrying the stress of the trans. put 2-3 of the other bolts back in and retry.
you should not need an impact for this, keep in mind the trans and block are aluminum so I would not recommend beating on them excessively as those threads will shear easily
torques spec is only 36 ftlbs or something like that
you should not need an impact for this, keep in mind the trans and block are aluminum so I would not recommend beating on them excessively as those threads will shear easily
torques spec is only 36 ftlbs or something like that