900hp turbo mach 1

iggster

Member
Established Member
Joined
May 13, 2010
Messages
554
Location
lbc
took the car to the track, that was a fail lol datalogger locked on my first pass so I "cruised" it 8.1@77mph

second pass I lifted one second into the run and then I went wot and shifted from 1st to neutral (reverse manaul valve body on trans)

decided to stop playing around and get a little more serious, did some upgrades

new turbo, transmission,torque converter, and nitrous,intake, throttle body

20131212_162635_zpstqrj2hlm.jpg


20131211_173932_zpstxxt24jw.gif


20131214_133518_zpsqxhzdqd4.jpg


IMG_20131221_080940_zpsxmqovxav.gif
 

iggster

Member
Established Member
Joined
May 13, 2010
Messages
554
Location
lbc
car is on the stock ecm, trying to see how fast or slow I can go with it lol

I wonder whats the fastest someone has gone in a new edge on the stock ecm?
 

iggster

Member
Established Member
Joined
May 13, 2010
Messages
554
Location
lbc
I love the car man. Anyway you can rehost a few of the pics?

I'll try and get them up again ASAP,

Here is a dyno video with the new turbo, it was blowing right through the converter. Why I got a new one and trans,
 

iggster

Member
Established Member
Joined
May 13, 2010
Messages
554
Location
lbc
Here is the video of the latest pass, I was suppose to race a gn that night, I told him my car has never been on the dyno or even tested at all with the new setup let me make a practice hit, He said okay.

I load up a fat tune with timing retarted,

he walks up and changes his mind while I am in the lanes, so I say ok whatever ill run you. I take off the second stage of nitrous cause I wasnt gonna make a full pass without knowing where the tune was at. No kabooms lol

they close the left lane and we dont get to run. so my car makes about 18lbs on that pass and without nitrous. A/f was pegged rich the whole pass and timing was about 2.5 degrees lower then what I ran on my old setup at 28lbs.

SMP tuning mach 1, first pass with new setup - YouTube
 

iggster

Member
Established Member
Joined
May 13, 2010
Messages
554
Location
lbc
Car is sounding healthy , best of luck !!

thanks, I cant wait to get it dialed in, I still need allot more seat time. I dunno if I trust my stock brakes at the shitty tracks we have so I might add a chute.


Here is a pic of hte launch, I added 1lb of boost on the launch now so hopefully it gets a little more air born. Hopefully not much ill shit myself lol

someair_zps478f0928.png
 

iggster

Member
Established Member
Joined
May 13, 2010
Messages
554
Location
lbc
okay my turbo had accident sucking in a rock, someone locally bought it though, I had an s480 billet I bought off ebay.


This time around I ordered one of a well known vender, with a race cover and a different a/r housing.

Ditching the nitrous, just gonna use it to spool the turbo.


sold my 105lb injectors and bought 140lb

also changing my water to air, ordered this one and gonna put it inside the car now in the passenger side.



getting rid of the dual exhuast out the bumpers and gonna do a single 4" out the fender.

Water to Air Intercoolers
 

blownco

BLOWN 95 COBRA
Established Member
Joined
Dec 5, 2004
Messages
1,724
Location
Roseville,CA
car looks cool from what ive been able to see. every video you posted almost said this use is private?
 

iggster

Member
Established Member
Joined
May 13, 2010
Messages
554
Location
lbc
car looks cool from what ive been able to see. every video you posted almost said this use is private?

sorry about that, but most the other ones are random dumb bs, the only one that "matters" is this one SMP tuning mach 1, first pass with new setup. turbo nitrous - YouTube

I had a small water to air then, an ebay s480, and "small" 105lb injectors then and made the pass on 18lbs

Also the new trans cooler came in, turbo should be here next week :banana::banana::banana::banana::banana:
I am replacing the 105 with 133lb injectors, replacing the water to air with a bigger one, and the ebay s480 with a legit one with a new version wheel with an ultimate race cover, guy said turbo should be good for over 1200rwhp, will see :burn:


20140206_184456_zpsmp0jfc8t.gif


20140206_184448_zpsmtlxdiup.gif


20140206_184507_zpscsbcdetv.jpg


20140211_195901_zpsto63j2kv.jpg


20140211_120657_zps7qdlqrjv.gif
 

Users who are viewing this thread



Top