Deleted please remove
Feb 17, 2017 #1 B Ba1dw1n New Member Established Member Joined Feb 17, 2017 Messages 23 Location Florida Deleted please remove Last edited: Oct 9, 2017
Feb 17, 2017 #2 ashleyroachclip Well-Known Member Established Member Joined Jan 25, 2007 Messages 2,189 Location Oregon Is that a bell housing bolt only ? If so , I would think probably not .
Feb 17, 2017 #3 B Ba1dw1n New Member Established Member Joined Feb 17, 2017 Messages 23 Location Florida Deleted please remove Last edited: Oct 9, 2017
Feb 17, 2017 #4 gt347mustang Well-Known Member Established Member Joined Jun 29, 2006 Messages 2,484 Location Colorado You could probably get away with one less bell housing bolt. Looks like the engine is out of the car, may as well upgrade to an aluminum block.
You could probably get away with one less bell housing bolt. Looks like the engine is out of the car, may as well upgrade to an aluminum block.
Feb 17, 2017 #5 ashleyroachclip Well-Known Member Established Member Joined Jan 25, 2007 Messages 2,189 Location Oregon I fixed my reply .
Feb 17, 2017 #6 TRBO VNM Well-Known Member Joined Feb 5, 2004 Messages 23,095 Location Maryland Won't be an issue. And actually, a lot of the aluminum blocks are cracked right there.
Feb 17, 2017 #7 B Ba1dw1n New Member Established Member Joined Feb 17, 2017 Messages 23 Location Florida Deleted please remove Last edited: Oct 9, 2017
Feb 17, 2017 #8 TRBO VNM Well-Known Member Joined Feb 5, 2004 Messages 23,095 Location Maryland Na, doesn't matter. you still have 6 more holding it on and the driver side has one more than the passenger side anyway. If you ever have the motor out, keep the part that broke. You can get it repaired.
Na, doesn't matter. you still have 6 more holding it on and the driver side has one more than the passenger side anyway. If you ever have the motor out, keep the part that broke. You can get it repaired.
Feb 17, 2017 #9 cj428mach Well-Known Member Established Member Joined Sep 21, 2012 Messages 7,609 Location Kansas It looks like the motor is out. If i was you i would get the piece brazed/welded back on just be careful when reinstalling that bolt in the future.
It looks like the motor is out. If i was you i would get the piece brazed/welded back on just be careful when reinstalling that bolt in the future.
Feb 17, 2017 #10 03cobra#694 Good Guy Super Moderator Joined Nov 12, 2003 Messages 61,946 Location SW FL. cj428mach said: It looks like the motor is out. If i was you i would get the piece brazed/welded back on just be careful when reinstalling that bolt in the future. Click to expand... JB Weld FTW.
cj428mach said: It looks like the motor is out. If i was you i would get the piece brazed/welded back on just be careful when reinstalling that bolt in the future. Click to expand... JB Weld FTW.
Feb 18, 2017 #11 TxCobra76 Active Member Established Member Joined Dec 2, 2015 Messages 283 Location Carthage,TX I've used JB weld before on broke block ears and had good luck with it. Sent from my iPhone using the svtperformance.com mobile app
I've used JB weld before on broke block ears and had good luck with it. Sent from my iPhone using the svtperformance.com mobile app
Feb 19, 2017 #12 RichM1983 Well-Known Member Established Member Joined Oct 6, 2005 Messages 1,767 Location Elkview, WV Since its out of the car I would call around and find someone to weld it. It wouldn't cost much.
Feb 19, 2017 #13 B Ba1dw1n New Member Established Member Joined Feb 17, 2017 Messages 23 Location Florida Deleted please remove Last edited: Oct 9, 2017