Does anyone have a picture of where to place a jumper wire to run the heat exchanger pump on an 08? I can't find the one picture I had and pictures via our website as well as others are not very clear. Fighting the dreaded air pocket. Thank you in advance.
Heat exchanger pump jumper wire
- Thread starter Harry08
- Start date
I literally just did this last night on my '07. Pull the relay for the pump (on pass side shock tower). You'll see 3 slots and 2 slots (not sure how better to describe - it'll be obvious though). Place a jump wire between the two side by side. Pump should come on. I had to blow thru my tank MULTIPLE times to get the circulation going. I was surprised how long it took. But it started circulating and worked fine when I took it to work today.
Thank you for the reply. That helped getting the jumper to run the pump working. No matter what I tried, I could not get the air out of the line. As a last resort I tried the plunger trick. Sure enough it worked.
URL=IMG_0284.JPG - Click to see more photos]
[/URL]
Thank you for the photo.
Users who are viewing this thread
