Irs to 8.8

[Speeders]

Alright guys, I'm about to swap my IRS out with a 8.8. So what all do I need to buy to put it in? I already got the cobra flange so I can use my drive shaft and I got rear gt springs. But I need to know what else I need to put it in.


Sent from my iPhone using the svtperformance.com mobile app

 

[apex svt]

Upper /lower control arms. Sway bar if you want one. Shocks are different too, Brake lines. I think that's about it?

 

[timspony]

I just did the swap...No change with the brake lines!
Upper Control Arms
Lower Control Arms .. you'll need to buy 14 mm bolts (4 total)
Shocks/springs (I did a rear coil over set-up)
I used a ARB
I used a 3" Bassani GT Catback

 

[timspony]

Here is a few pics....