Leftover Vortech BOV, Vortech 2.87 pulley, idlers, and 8 Rib kit

[UncleSAm]

Air Straightener P/N 7S350-220 Retail $78.99 (NEW) Air Straightener Sleeve P/N 7PS400-301 Retail $89.95 (NEW)
Me BOTH $150 Shipped

Have a NEW never mounted bypass valve. Comes with a new gasket and Hardware,

SOLD

NEW (2) ones in the box 6 rib idlers made by Gates and are 90mm -- 25 shipped

USED 8 rib kit, comes with everything you need, long stem water pump, water pump pulley, power steering, crank, a/c, grooved idler, one smooth 90mm idler, the Belt Tensioner, and the Tensioner has a Thump RRR 75mm idler, comes with a 2.95 Vortech pulley (with 8 rib retaining hardware), a Thump RRR 70 mm idler (goes next to the blower and under the alt), 130 amp Alternator (the alternator shaft has been milled down to allow the pulley to sit further). spacers for the idler pulley's, spacers for the bracket to block and the spacer for the tensioner. every thing is just how it was when i removed it from my car.--500 shipped

 

[02SVTV6]

Bump for this man.

 

[UncleSAm]

bump

 

[UncleSAm]

Tty


Sent from my iPhone using Tapatalk

 

[UncleSAm]

Bump

 

[Lightning&Mach1]

Does the BOV come with any flange to get welded on the charge piping?

 

[UncleSAm]

Does the BOV come with any flange to get welded on the charge piping?

No sir when you order the valve it doesn't come with it but the aluminum flange is cheap, comes with what's pictured

http://www.superchargersonline.com/...uct_info&cPath=510_1155_1298&products_id=5927

 

[UncleSAm]

Bov sold

 

[Carbon Driven]

Why did the alternator shaft need to be milled? Shouldnt the pulley sit in same spot as the increased 2 ribs all will stick out the same?

 

[UncleSAm]

Either you mill down the shaft to have it sit further back or space the alternator back to accommodate for the extra 2 ribs

 

[omj]

Milled the stub on the back of my alt pulley to get the spacing right.

 

[UncleSAm]

Bump

 

[UncleSAm]

Bump

 

[milktasd2]

If the tensioner is a 3bolt, would you be willing to sell separately?

 

[UncleSAm]

If the tensioner is a 3bolt, would you be willing to sell separately?

Single bolt and no sorry