Let’s see your wheels/tires!

Booky

Who's Pick'n The Banjo Here?
Established Member
Joined
Feb 3, 2010
Messages
3,670
Location
US
How much are you looking to spend?

If you looking for a budget friendly cast wheel that looks good, I had a set of BMC Black Mamba wheels on my 2012 GT500 and loved how they looked on the Shelby:
https://www.bmcextremecustoms.net/mustangwheels.html

Op9c.jpg

Rp9c.jpg
 

Cman01

hello
Established Member
Joined
May 25, 2012
Messages
2,418
Location
Toronto
Forgeline GA1R's 19x10" F 20x11" R in Transparent Smoke finish

Tires: MPSS 275/40/19F 295/35/20R

28vfxqa.jpg


2ebswid.jpg


2ebswid.jpg


2m5m9s7.jpg


 

Catmonkey

I Void Warranties!
Established Member
Premium Member
Joined
May 20, 2011
Messages
3,854
Location
Louisiana
I've got a thread in the how-to section of the GT500 forum on what I did to make clearance and a little detail about my widening project. I had Eric Vaughn do the work. I've been running 315/35-20s for a while and while the car is down for some upgrades, I mounted the new Michelin Sport Cup 2 in 325/30-20. While the tread width is wider, the cross section is just about the same and the 30 aspect is an 1" shorter in diameter. Going to 11" will require a 1/4" to 3/8" spacer, while going to 10.5" will be just about right. However, it can limit tire options.

I bought a set of used True Forged Competitions and will be mounting the tires on these. I'm using a little wider hoop on the rear to bring it to 11.5", but will give me the same offset I'm running with spacers. I'll post an update when I get to that point, but my main focus is getting the other upgrades done first.
 

LuuisHernandez

Active Member
Established Member
Joined
Dec 15, 2015
Messages
565
Location
California
Wheels are Rennen and tires are now pirelli pzero 305/35/20 and 265/35/20.
c53f3e7b0c71f4861aedc40f2e5f46bc.jpg


Sent from my iPhone using svtperformance.com
 
Last edited:

Users who are viewing this thread



Top