Looking to buy 03-04 cobra

Troy dudich

Member
Established Member
Joined
Dec 18, 2016
Messages
113
looking to buy another cobra, I've sold my last two and regret it lol. Trying to get one I'll actually drive and not be so worried about so higher mileage will be ok but would like under 100k. I don't want to spend more than 20k and that would be my max. Located in central Nc. The closer the better. Text me what you have 336-402-5828 preferred colors would be black, dsg, torch red, possibly another SB will consider all others
 

mbsvt

My Hot Rod's
Established Member
Joined
Dec 11, 2008
Messages
842
Location
florida
Check this one out.. Its a little more $$$ but money well spent on the mods..
And u know what ever you buy, you will mod it. LOL

PM me or call (954) 830 2916
I have one for you with all the right mods
2.3 whipple with all the supporting mods.
Click on this link for some pic https://1drv.ms/a/s!AlU2T_3KoW3TiRVGek7RMLTe1oAD
40k miles
$23.900
Motor…..
1000 Miles on complete rebuilt, Complete valve job, file fit rings, polished crankshaft. All new bearings and seals. All works completed and assembled by a Ford Certified Technician.

Supercharger…has less than 5000 miles…
2.3 Whipple Gen 2 Pulley 3.00 upper… Metco #4 pound lower Pulley kit…
AccuFab Signal blade Throttle body…
JLT carbon fiber CAI...
SCT 3000 MAF…
LPF Duel Pass heat exchanger…

Fuel System…
New ID 1000 fuel injectors
New E85 Compatible black fuel lines with #8 feed @# 6 return…
Precision Performance fuel filter….
Aeromotive adjustable fuel pressure regulator with gauge…
Fore high flow fuel rails…
Fore duel fuel pump hat
Twin E85 compatible Walbro fuel pumps…

Exhaust…
Kooks long tube headers with 3" kooks off road x pipe (no cats)
New Magnaflow stainless steel 2 1/2" complete Exhaust system

Driveline…
Tremec T56 Magnum 26 Spline Less than 3000 miles…
QuickTime Blowproof Bellhousing…
BMR driveshaft loop…
Driveshaft shop, Aluminum Shaft…
Driveshaft Shop Cobra Level 5 Halfshafts with 3" wheel studs front and rears…
Complete set of poly urethane rear sub frame bushings…
Adjustable Clutch kit…
Clutch Mcleod RTX Twin disc 26 Spline kit with new Ford throw out bearing…

Brakes…
Brembo Front 4 piston caliper brake kit with rotors and s/s brake lines…

Gauges…
Auto Meter Elite Series fuel pressure gauge with electronic fuel rail sensor…
Auto Meter Elite Series Electric Boost/Vacuum gauge…
Mounted on an Auto Meter Duel Gauge instrument cluster bezel…
Hilton Boost Gauge Overlay…

Kenne Bell
Boost a pump with upgraded wiring kit…
Boost a Spark…
M/T drag radials on 10 1/2" Chrome cobra wheels…
Factory Chrome Cobra wheels up front…

Diablo Tuner… 93 Tune and Recently added an E85 tune……

View attachment 90972
 

SchmittySVT

New Member
Established Member
Joined
Feb 19, 2014
Messages
20
Location
Long Island
Hey Troy, I might consider letting mine go...it's a clean title 04 w/ no accidents and 72k. Hmu if you're interested in more details!
516-233-0869
 

03miamisnake

Member
Established Member
Joined
Aug 12, 2003
Messages
311
Location
miami
Troy. I have an '03 DSG coupe with 53k miles. Never been pullied. Just a tune, intake and exhaust, with 18" AFS Replicas on H&R Race Springs. I got it in December 2012 with 15k miles and have used it as my daily driver since August 2013 (all highway miles). I had the front (all the way up the hood) and side mirrors done with a clear bra, so no dings, nicks, etc. Cost a ton ($750), but was completely worth it as my commute is on the turnpike, so would have taken a beating otherwise. I'm taking delivery shortly of a Hellcat Challenger that I couldn't pass up. If you don't mind waiting a few weeks, it might be what you are looking for. I will be firm on $20k and I am in South Florida. Let me know if you might be interested.

Ryan
 

Troy dudich

Member
Established Member
Joined
Dec 18, 2016
Messages
113
Troy. I have an '03 DSG coupe with 53k miles. Never been pullied. Just a tune, intake and exhaust, with 18" AFS Replicas on H&R Race Springs. I got it in December 2012 with 15k miles and have used it as my daily driver since August 2013 (all highway miles). I had the front (all the way up the hood) and side mirrors done with a clear bra, so no dings, nicks, etc. Cost a ton ($750), but was completely worth it as my commute is on the turnpike, so would have taken a beating otherwise. I'm taking delivery shortly of a Hellcat Challenger that I couldn't pass up. If you don't mind waiting a few weeks, it might be what you are looking for. I will be firm on $20k and I am in South Florida. Let me know if you might be interested.

Ryan
Text me some pics 336-402-5828
 

Users who are viewing this thread



Top