Official Cobra Exhaust Sound Clip Thread.

[CobraHuck]

Stainless Steel Systems Adrenaline catback for a 99-04 GT
UPR offroad Xpipe
Stock manifolds
Stock 4.6 with just a tune and 4.10 gears

Sorry for the crappy videos, just had the phone sitting in the cup holder/leaned up on a sign. I need a GoPro badddd
Romping on a back road, shifting around 4-5k
[video=youtube;mt2WG29BMR8]https://www.youtube.com/watch?v=mt2WG29BMR8#t=25[/video]

 

[CobraHuck]

180 degree banked on ramp in 2nd gear, then up to about 80 on the highway
[video=youtube;MwqBfLPY6V4]https://www.youtube.com/watch?v=MwqBfLPY6V4[/video]

 

[CobraHuck]

Outside the car, some revs then normal take off
[video=youtube;omCPOFJP6pw]https://www.youtube.com/watch?v=omCPOFJP6pw[/video]

 

[CobraHuck]

Outside the car, romping on it. Kept checking to make sure my phone wasn't gonna fall lol
[video=youtube;4QNP41vTegY]https://www.youtube.com/watch?v=4QNP41vTegY[/video]

 

[robb15033]

I tell ya- That system is really sweet looking and sounds phenomenal! That's a real high-end system, up there with the Borla Stingers and Multitube Bullets in my opinion.

 

[CobraHuck]

Sound wise and overall quality wise I'd agree. Plus, full 304 stainless catback for ~390? It's a little thin walled, but you can't beat that price. Since these videos, I put the tips on and it quieted it down A LOT in the car but it's even more high pitched and SCREAMs outside now. At cruise you'd think it's stock inside. All my buddies and the guys at work say this is the best sounding mustang they've ever heard.

My only gripe with the system is the clamps they send with it suck. They're only like an inch wide and they crimp the pipes instead of clamping like a wide band clamp, and they don't keep the system still. I've already adjusted it twice and the over the axle pipes just rotate back down and hit the rear subframe. I'll be replacing them with wide band clamps this weekend and hope they hold, otherwise it will get welded.

 

[robb15033]

TorcTite has band clamps with gasket http://www.catalyticexhaust.ca/products_page7126.html OR
http://www.apexhaust.com/wp-content/uploads/2010/07/HD_Premium_Exhaust_Clamping_Products_APEC0808.pdf
HiTemp sealant will help seal and protect metal for future removal.

 

[CobraHuck]

They're clamps are a similar design, but because of how skinny they are I guess, they crimp the pipe. I've got some wide bands in the garage I'm gonna try, if they don't work I'll order some of those and probably tack at least the junctions that keep spinning. Thanks for the link!

 

[CobraHuck]

My buddy's wife took a quick video the other night, just a little more than half throttle pull from maybe 50-90ish
[video=youtube;75q89AoyV4E]https://www.youtube.com/watch?v=75q89AoyV4E&feature=youtu.be[/video]

 

[Captain Chris]

Recently change from a UPR to Bassani X-pipe, took a before and after video.


UPR x-pipe
[video=youtube;xLaUhHBiBgA]https://www.youtube.com/watch?v=xLaUhHBiBgA[/video]

 

[Captain Chris]

Bassani x-pipe

[video=youtube;uDI8QDo2HF8]https://www.youtube.com/watch?v=uDI8QDo2HF8[/video]

 

[Murder Snake]

 

[1998SVTCOBRA]

Here is a clip of me getting on the on ramp. BBK long tubes and o/r x pipe, magna flow cat back.

https://vimeo.com/136938963

 

[98 N/A 4V]

Pacesetter longtubes, O/R X pipe, race bullets dumped...

https://youtu.be/64LlKmCgDjk

 

[98SVTContour98]

Long-tube Headers, catted H-pipe, Flowmaster cat-back

[video=youtube;TGx92C9-M04]https://www.youtube.com/watch?v=TGx92C9-M04&feature=youtu.be[/video]

 

[Tickle]

Stock headers, Bassani O/R X, Magnaflow mufflers(11235)

https://m.youtube.com/watch?v=Wl10IOrtP7M

 

[98SVTContour98]

Changed out my Flowmaster 40s for Flowmaster 10s - https://www.youtube.com/watch?v=-AstA4wXycA&feature=youtu.be

 

[acmsheva7]

FLOWMASTER, OFF ROAD X PIPE, LONG TUBE HEADERS ON 1997 MUSTANG COBRA

https://youtu.be/aPmHIJCHIqw

FAST FORWARD TO 55 SECONDS ON THE VIDEO
THANKS

 

[Zemedici]

New Car

1 7/8" Kooks to 3" Collector to 2.5" Borla Stinger Catback

[YOUTUBE_BROWSER]qU-r7hDJf9g[/YOUTUBE_BROWSER]


Last car

Stock Manifolds, Pypes O/R X, and Bassani Catback

[YOUTUBE_BROWSER]shMbJv00c0s[/YOUTUBE_BROWSER]

 

[alaskablkmach]

Here is mine...Kooks LT's, o/r x-pipe, spin tech proshootouts.
[video]https://youtu.be/K7Gpr2FbitM[/video]