On3 Performance 96-04 4V Twin Turbo Kit

[SVT GI]

Have an On3 Performance 4V twin turbo kit for sale that came on an unfinished Terminator project I picked up. Already have a twin turbo project underway so going with a VMP TVS on this one. Kit has only been installed and uninstalled, no run time at all.

This is their "3R 1100 HP" upgrade. It has the dual ball bearing 61 mm turbos with .63 hot side. This kit is over $3700 new from them. I will include the modified GT oil/cooler inlet already clearanced to fit. Overall I am surprised how well this kit fit. Keeps all accessories, only have to do an oil filter relocation (included)

Kit includes:
- Turbos
- Complete cold side that used with a slot style MAF (MAF not included)
- oil feed and return lines with scavenge pump. Just need oil pan fitting
- oil filter relocation kit
- complete hot side, headers, up pipes and down pipes all the way to your cat back.
- 50 mm BOV and two 44mm wastegates
- misc hardware.

I called On3 to confirm turbos and kit information. This is exactly how it comes from On3. You'll need a UPR K member to install.

$3,000 plus shipping & pay pal fees

 

[97BlownCobra]

I need to sell my T trim Vortech setup for this

 

[old01cobra]

I need to sell my T trim Vortech setup for this

Whats your T-trim setup?

 

[97BlownCobra]

96-98 Cobra V3 T-trim, BGG 8 rib, 10% OD IW balancer, 4" air to air intercooler, 46MM Precision wastegate, 50MM BOV, set up for blow thru slot MAF.

 

[old01cobra]

96-98 Cobra V3 T-trim, BGG 8 rib, 10% OD IW balancer, 4" air to air intercooler, 46MM Precision wastegate, 50MM BOV, set up for blow thru slot MAF.

You sure its a V3 T-trim? Only V3 I know about is the V-3 SI. If it is a true T-trim like a V1 or V2 T-trim Id be interested in the setup.

 

[TylerH2321]

Interested in a 2.3l Whipple trade with any part you need to do a swap? Car made 616 on 15lbs with conservative tune

 

[SVT GI]

Interested in a 2.3l Whipple trade with any part you need to do a swap? Car made 616 on 15lbs with conservative tune

Appreciate the offer but wanting to go TVS this time around.

 

[97BlownCobra]

You sure its a V3 T-trim? Only V3 I know about is the V-3 SI. If it is a true T-trim like a V1 or V2 T-trim Id be interested in the setup.

This head unit was never marketed for the Mod Motor, it was made by Vortech for the C5 and C6 Corvettes. CCW straight discharge and it is a 3.75 inlet so it's actually a Ti.

 

[Turbomach]

Still available?

 

[SVT GI]

Still available?

Yes $3100 shipped firm

 

[03SVT Ski]

Do you know what the hotside flange bolt pattern is?

 

[SVT GI]

Do you know what the hotside flange bolt pattern is?

T3 and 4 bolt down pipe pattern. You can order interchangeable compressor and turbine housings from On3 as well.

 

[TylerH2321]

Still available? Looking to buy next week if it's a plug and play kit

 

[TylerH2321]

7039458349
Let me know, serious buyer.

 

[DeltaElite121]

Bump for a great seller. He's local to me and a very good guy to deal with.

 

[03SVT Ski]

On the MAF, is the a draw thru or blow thru?

 

[SVT GI]

7039458349
Let me know, serious buyer.

For now Yes, debating on keeping for another project.

On the MAF, is the a draw thru or blow thru?

Designed for slot style blow thru. No MAF included as stated in OP, only piping. Can include a new one I have for another project for $160 extra.

 

[TylerH2321]

I'll let you know early next week if you'd like to get rid of it, pay pal ready

 

[TylerH2321]

Can I buy this kit from you? Pm me

 

[SVT GI]

Can I buy this kit from you? Pm me

Lol sorry, wasn't expecting anything until next week from you. Pm sent