Hey guys, I know this might be a bit of a strech, but does anyone know where I can get some quad tips that would bolt/clamp onto the Roush ab? I'm not too big on welding the tips on, as I want it to be reversible if I ever need to change it also I like the ability to adjust. I would like the tips to be similar to the GT500 quads, with the slant cut. I haven't been able to find any myself, but if anyone knows where to find some let me know. The diameter of the outlet of the Roush is 2.5" and the tips are 4". I can give measurements of the original single tip if anyone needs it.
I found these but they don't make it in the required size :/
http://www.ebay.com/itm/181841995986?ul_noapp=true
I found a few other ones on eBay, but they're only a small staggered set, and none that I found are able to be bolted on, as the diameter is the same as the outlet.
I found these but they don't make it in the required size :/
http://www.ebay.com/itm/181841995986?ul_noapp=true
I found a few other ones on eBay, but they're only a small staggered set, and none that I found are able to be bolted on, as the diameter is the same as the outlet.
