SVTPerformance.con Mach 1 Picture Thread

bleedingfordblu

Active Member
Established Member
Joined
Jul 14, 2008
Messages
4,227
Location
Leesburg VA
4e6276396640e99beb27eac29871fba0.jpg

Anybody seen this badboy around? Wondering how it's doing. Last known location was Hampton Roads in VA.

Sent from my SM-N930T using Tapatalk
If its the car Im thinking of it was t boned at mustang week last year
 

Ryan2KRedL

SVT Enthusiast
Established Member
Joined
Nov 22, 2000
Messages
1,186
Location
Raleigh, NC
So up tomorrow is a YUGE change for the Mach 1.
I have purchased a complete 2004 Terminator drivetrain to swap! 50k miles on it and includes everything from the supercharger to the oil pan, back to the T56 transmission and driveshaft!
Gonna start the removal of the stock 4 valve engine tomorrow and start installing the Terminator heart!! :D

IMG_0846_zpspwrhkieb.jpg

IMG_0849_zpslfpx9lwq.jpg
 

Ryan2KRedL

SVT Enthusiast
Established Member
Joined
Nov 22, 2000
Messages
1,186
Location
Raleigh, NC
Drove into the shop at 8AM as a bone stock Mach 1.
At 7PM I drove it home as a Terminator swapped Mach!
Big thanks to Caleb @ Fastlane Motorsports for all his hard work and skill today. Made the entire drivetrain swap look easy.
From the new 8.8 rearend flange needed for the new Cobra aluminum driveshaft, to the wiring mods for the cobra alternator and engine harness.
He loaded a tune in my computer and the car fired right up. Drove it home and it was super smooth and ran great with the new 6 speed.

Got a few things to complete such as mounting the shaker, hooking up the intercooler pump and heat exchanger and then it will be 100%.

Starting removal of Mach 1 engine and 3650 transmission -

IMG_0901_zpsdi0alozt.jpg

IMG_0902_zpsl7e9x5hm.jpg


Prepping Terminator engine and T56 transmission -
Mach20motor20swap204_zps2tz1ycpx.jpg
Mach%20motor%20swap_zpsglucnchm.jpg


Installed and finishing up final connections -
Mach%20motor%20swap%202_zpsuydtsfpm.jpg

IMG_0916_zpsvijzwijq.jpg

IMG_0923_zpsz1xkh8d1.jpg
 

Fomoco69

Member
Established Member
Joined
Nov 26, 2016
Messages
126
Drove into the shop at 8AM as a bone stock Mach 1.
At 7PM I drove it home as a Terminator swapped Mach!
Big thanks to Caleb @ Fastlane Motorsports for all his hard work and skill today. Made the entire drivetrain swap look easy.
From the new 8.8 rearend flange needed for the new Cobra aluminum driveshaft, to the wiring mods for the cobra alternator and engine harness.
He loaded a tune in my computer and the car fired right up. Drove it home and it was super smooth and ran great with the new 6 speed.

Got a few things to complete such as mounting the shaker, hooking up the intercooler pump and heat exchanger and then it will be 100%.

Starting removal of Mach 1 engine and 3650 transmission -

IMG_0901_zpsdi0alozt.jpg

IMG_0902_zpsl7e9x5hm.jpg


Prepping Terminator engine and T56 transmission -
Mach20motor20swap204_zps2tz1ycpx.jpg
Mach%20motor%20swap_zpsglucnchm.jpg


Installed and finishing up final connections -
Mach%20motor%20swap%202_zpsuydtsfpm.jpg

IMG_0916_zpsvijzwijq.jpg

IMG_0923_zpsz1xkh8d1.jpg
Drove into the shop at 8AM as a bone stock Mach 1.
At 7PM I drove it home as a Terminator swapped Mach!
Big thanks to Caleb @ Fastlane Motorsports for all his hard work and skill today. Made the entire drivetrain swap look easy.
From the new 8.8 rearend flange needed for the new Cobra aluminum driveshaft, to the wiring mods for the cobra alternator and engine harness.
He loaded a tune in my computer and the car fired right up. Drove it home and it was super smooth and ran great with the new 6 speed.

Got a few things to complete such as mounting the shaker, hooking up the intercooler pump and heat exchanger and then it will be 100%.

Starting removal of Mach 1 engine and 3650 transmission -

IMG_0901_zpsdi0alozt.jpg

IMG_0902_zpsl7e9x5hm.jpg


Prepping Terminator engine and T56 transmission -
Mach20motor20swap204_zps2tz1ycpx.jpg
Mach%20motor%20swap_zpsglucnchm.jpg


Installed and finishing up final connections -
Mach%20motor%20swap%202_zpsuydtsfpm.jpg

IMG_0916_zpsvijzwijq.jpg

IMG_0923_zpsz1xkh8d1.jpg
Great pictures, looks like he knows what he is doing.......good luck with your modified mach !
 

sutyak

it's soo-tack
Established Member
Joined
Nov 10, 2003
Messages
241
Location
Fairmont, WV
Teskid block, forged internals at 8.5:1 CR, Borg Warner S369SX-E at 9-18psi, G-Force 1000hp TR3650 with Quicktime bell, 6 point bar, 31 spline mosers, reinforced torque boxes, full length sfc, return fuel system, etc. 4.10 gears at the moment. Also have 3.55 and 3.90 on the shelf.
Should be right around 700whp, but dyno has been low priority. Will see track time after some house projects. :D
The goal was to have a 10.0 legal car that I can drive to the track, swap tires, turn up the boost, rip on it a while, and then drive home.

20170603_120930.jpg

18319209_1905502736388064_8467000183655155466_o.jpg

20170217_170509.jpg


20170217_170348.jpg


P1040876.jpg


20160910_131837.jpg
 

Ryan2KRedL

SVT Enthusiast
Established Member
Joined
Nov 22, 2000
Messages
1,186
Location
Raleigh, NC
Few updates -



Finally found the time to do some upgrades to the Mach 1.

Installed the Metco 4# lower pulley setup. Added the 3.2 alternator pulley. Installed the powder-coated valve covers and added some different bolts for a better look. Installed the 80# injectors and got Caleb @ Fastlane to write me a new tune file to get it running till I can get back on the dyno.

So far this thing runs great! The Kennebell screams now and the torque is much improved!

I have the Kooks long tube headers and 3" X-pipe to install and then final dyno tune. Hoping for 650-675rwhp.



Also got my 17" Bogart RT wheels in. Test fitted them and they look great. Fit like a glove!



IMG_2969_zpsgbs6dw52.jpg


IMG_2970_zpsde6bf3tk.jpg


IMG_2999_zpsjdrxqaf9.jpg


IMG_3012_zpsfiq8rz5n.jpg
 

Bouttime09

Oh, it's not 5.0?
Established Member
Joined
Feb 22, 2009
Messages
1,536
Location
Enid, OK
Great looking cars. I keep coming back to see if anyone ever posts a picture of my old car... Thread seems to be dead.

Sent from my SM-N950U using Tapatalk
 

Users who are viewing this thread



Top