I am struggling to figure this out. I am trying to log the pressure drop across injectors PID in livelink II with my X4 and all I keep getting is a value of 0 in livelink.
However if I use gauge mode on the X4 handheld and select pressure drop across injectors I get the value of 50psi that I have my return fuel system set to.
Anyone have any ideas as to what could be my issue?
Its a return fuel setup with the FRPS left in the system to log fuel pressure.
However if I use gauge mode on the X4 handheld and select pressure drop across injectors I get the value of 50psi that I have my return fuel system set to.
Anyone have any ideas as to what could be my issue?
Its a return fuel setup with the FRPS left in the system to log fuel pressure.