What will my blown 01 cobra put down??

[nfamous]

Well it's been a while and the car is getting buttoned up real quick here what do you think it will put down ..... on pump gas race gas and nitrous

4.75 stroker built for 1500hp
9.2 to 1 compression
Whipple 2.3 2.9rr pulley
Heads re done with stage 3 comp cams
Arh headers to bassani open race
Fore triple pump 3 large ones
Id1050x Injectors
C&l maf
Diablo mafia
Bbk cai
75 -200 shot
Please post up what ya think..

Sent from my [device_name] using the svtperformance.com mobile app

 

[old01cobra]

Not sure what your max RPM of the engine and blower is, but on the blower alone I'd guess high 500whp to high 600ish if your pullied to run 18+ish psi, with a stroker and heads and cams you'll probably see 2-3 psi less since the engine is so efficient. Then you have the shot on the top of it so 650ish rwhp to 900ish rwhp id guess to many variables. Whats the crank pulley?

Similar to what I'm doing now just with a V-1 ti trim.

 

[Brutal Metal]

622 on pump gas. BUT I'd be concerned with your MAF setup, your gonna Max that combo out.

 

[gt347mustang]

I'm hoping you're not on 99/01 heads?

I say 800 on a 200 shot.

 

[nfamous]

9 thread 01 heads ported 95mm c&l maf stock lower was getting 21 psi but probably be 18 with headers now

Sent from my [device_name] using the svtperformance.com mobile app

 

[nfamous]

9 thread 01 heads ported 125mm c&l maf stock lower was getting 21 psi but probably be 18 with headers now

Sent from my [device_name] using the svtperformance.com mobile app

Shot would be wet after maf

Sent from my [device_name] using the svtperformance.com mobile app

 

[nfamous]

I was at 608 before came and headers but ran outta fuel

Sent from my [device_name] using the svtperformance.com mobile app

 

[nfamous]

I was at 608 before came and headers but ran outta fuel

Sent from my [device_name] using the svtperformance.com mobile app

At 5600 rpms I think

Sent from my [device_name] using the svtperformance.com mobile app

 

[gt347mustang]

9 thread 01 heads ported 125mm c&l maf stock lower was getting 21 psi but probably be 18 with headers now

Sent from my [device_name] using the svtperformance.com mobile app

9 thread from earlier years doesn't mean anything.

 

[nfamous]

9 thread from earlier years doesn't mean anything.

What are you trying to say?

Sent from my [device_name] using the svtperformance.com mobile app

 

[nfamous]

Well I got a pump gas tune and some numbers 594/529 16lbs 13* on 91 Octane with a lil boostane for good measure was getting spark blow upper rpm tuner said I'd hit 600 if gapped plugs down proper to 25 was at 39

Sent from my SM-G955U using the svtperformance.com mobile app

 

[nfamous]

Sae corrected

Sent from my SM-G955U using the svtperformance.com mobile app

 

[bull_dog190]

Sae corrected View attachment 1500544

Sent from my SM-G955U using the svtperformance.com mobile app

nice numbers bro. did you re-gap your plugs yet

 

[nfamous]

Yes runs great

Sent from my SM-G955U using the svtperformance.com mobile app